New Spectre-v2 attack classes have been discovered within CPU architectures that enable self-training exploitation of speculative execution within the same privilege domain. These novel techniques bypass existing hardware and software mitigations, including IBPB, eIBRS, and BHI_NO, by leveraging in-kernel gadgets (potentially accessible via SECCOMP/cBPF), Branch Target Buffer (BTB) aliasing, and direct-to-indirect branch predictor training. While the root cause lies in CPU architectural behavior, the vulnerability manifests through kernel-level speculation paths, allowing attackers to potentially leak sensitive memory.

A transient execution vulnerability in some AMD processors may allow an attacker to infer data from previous stores, potentially resulting in the leakage of privileged information.

A transient execution vulnerability in some AMD processors may allow an attacker to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/tracing: Fix a potential TP_printk UAF The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format") exposes potential UAFs in the xe_bo_move trace event. Fix those by avoiding dereferencing the xe_mem_type_to_name[] array at TP_printk time. Since some code refactoring has taken place, explicit backporting may be needed for kernels older than 6.10.

In the Linux kernel, the following vulnerability has been resolved: igb: Fix potential invalid memory access in igb_init_module() The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix out-of-bounds access of directory entries In the case of the directory size is greater than or equal to the cluster size, if start_clu becomes an EOF cluster(an invalid cluster) due to file system corruption, then the directory entry where ei->hint_femp.eidx hint is outside the directory, resulting in an out-of-bounds access, which may cause further file system corruption. This commit adds a check for start_clu, if it is an invalid cluster, the file or directory will be treated as empty.

In the Linux kernel, the following vulnerability has been resolved: nfsd: release svc_expkey/svc_export with rcu_work The last reference for `cache_head` can be reduced to zero in `c_show` and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently, `svc_export_put` and `expkey_put` will be invoked, leading to two issues: 1. The `svc_export_put` will directly free ex_uuid. However, `e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can trigger a use-after-free issue, shown below. ================================================================== BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd] Read of size 1 at addr ff11000010fdc120 by task cat/870 CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_address_description.constprop.0+0x2c/0x3a0 print_report+0xb9/0x280 kasan_report+0xae/0xe0 svc_export_show+0x362/0x430 [nfsd] c_show+0x161/0x390 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 830: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_node_track_caller_noprof+0x1bc/0x400 kmemdup_noprof+0x22/0x50 svc_export_parse+0x8a9/0xb80 [nfsd] cache_do_downcall+0x71/0xa0 [sunrpc] cache_write_procfs+0x8e/0xd0 [sunrpc] proc_reg_write+0xe1/0x140 vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 868: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kfree+0xf3/0x3e0 svc_export_put+0x87/0xb0 [nfsd] cache_purge+0x17f/0x1f0 [sunrpc] nfsd_destroy_serv+0x226/0x2d0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`. However, `svc_export_put`/`expkey_put` will call path_put, which subsequently triggers a sleeping operation due to the following `dput`. ============================= WARNING: suspicious RCU usage 5.10.0-dirty #141 Not tainted ----------------------------- ... Call Trace: dump_stack+0x9a/0xd0 ___might_sleep+0x231/0x240 dput+0x39/0x600 path_put+0x1b/0x30 svc_export_put+0x17/0x80 e_show+0x1c9/0x200 seq_read_iter+0x63f/0x7c0 seq_read+0x226/0x2d0 vfs_read+0x113/0x2c0 ksys_read+0xc9/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Fix these issues by using `rcu_work` to help release `svc_expkey`/`svc_export`. This approach allows for an asynchronous context to invoke `path_put` and also facilitates the freeing of `uuid/exp/key` after an RCU grace period.

In the Linux kernel, the following vulnerability has been resolved: zram: fix NULL pointer in comp_algorithm_show() LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem.

In the Linux kernel, the following vulnerability has been resolved: x86/xen: don't do PV iret hypercall through hypercall page Instead of jumping to the Xen hypercall page for doing the iret hypercall, directly code the required sequence in xen-asm.S. This is done in preparation of no longer using hypercall page at all, as it has shown to cause problems with speculation mitigations. This is part of XSA-466 / CVE-2024-53241.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix potential buffer overflowin nfs_sysfs_link_rpc_client() name is char[64] where the size of clnt->cl_program->name remains unknown. Invoking strcat() directly will also lead to potential buffer overflow. Change them to strscpy() and strncat() to fix potential issues.

In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl Fix an issue detected by syzbot with KASAN: BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/ core.c:416 [inline] BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0 drivers/acpi/nfit/core.c:459 The issue occurs in cmd_to_func when the call_pkg->nd_reserved2 array is accessed without verifying that call_pkg points to a buffer that is appropriately sized as a struct nd_cmd_pkg. This can lead to out-of-bounds access and undefined behavior if the buffer does not have sufficient space. To address this, a check was added in acpi_nfit_ctl() to ensure that buf is not NULL and that buf_len is less than sizeof(*call_pkg) before accessing it. This ensures safe access to the members of call_pkg, including the nd_reserved2 array.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU protection. But it is possible to attach a non-sleepable BPF program to a uprobe, and non-sleepable BPF programs are freed via normal RCU (see __bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal RCU grace period does not imply a tasks-trace-RCU grace period. Fix it by explicitly waiting for a tasks-trace-RCU grace period after removing the attachment of a bpf_prog to a perf_event.

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY Since commit 8f4f68e788c3 ("crypto: pcrypt - Fix hungtask for PADATA_RESET"), the pcrypt encryption and decryption operations return -EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns -EAGAIN, the unnecessary panic will occur when panic_on_warn set 1. Fix this issue by calling crypto layer directly without parallelization in that case.

In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_protocol_dgram() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900038d7638 EFLAGS: 00010282 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60 R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140 R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011 FS: 00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585 packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1055 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2940 __sys_recvmmsg net/socket.c:3014 [inline] __do_sys_recvmmsg net/socket.c:3037 [inline] __se_sys_recvmmsg net/socket.c:3030 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_tci() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50 R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140 R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014 FS: 00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565 packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1066 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814 ___sys_recvmsg net/socket.c:2856 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2951 __sys_recvmmsg net/socket.c:3025 [inline] __do_sys_recvmmsg net/socket.c:3048 [inline] __se_sys_recvmmsg net/socket.c:3041 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled When the caching for a cookie is temporarily disabled (e.g. due to a DIO write on that file), future copying to the cache for that file is disabled until all fds open on that file are closed. However, if netfslib is using the deprecated PG_private_2 method (such as is currently used by ceph), and decides it wants to copy to the cache, netfs_advance_write() will just bail at the first check seeing that the cache stream is unavailable, and indicate that it dealt with all the content. This means that we have no subrequests to provide notifications to drive the state machine or even to pin the request and the request just gets discarded, leaving the folios with PG_private_2 set. Fix this by jumping directly to cancel the request if the cache is not available. That way, we don't remove mark3 from the folio_queue list and netfs_pgpriv2_cancel() will clean up the folios. This was found by running the generic/013 xfstest against ceph with an active cache and the "-o fsc" option passed to ceph. That would usually hang

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix ceph copy to cache on write-begin At the end of netfs_unlock_read_folio() in which folios are marked appropriately for copying to the cache (either with by being marked dirty and having their private data set or by having PG_private_2 set) and then unlocked, the folio_queue struct has the entry pointing to the folio cleared. This presents a problem for netfs_pgpriv2_write_to_the_cache(), which is used to write folios marked with PG_private_2 to the cache as it expects to be able to trawl the folio_queue list thereafter to find the relevant folios, leading to a hang. Fix this by not clearing the folio_queue entry if we're going to do the deprecated copy-to-cache. The clearance will be done instead as the folios are written to the cache. This can be reproduced by starting cachefiles, mounting a ceph filesystem with "-o fsc" and writing to it.

In the Linux kernel, the following vulnerability has been resolved: memcg: fix soft lockup in the OOM process A soft lockup issue was found in the product with about 56,000 tasks were in the OOM cgroup, it was traversing them when the soft lockup was triggered. watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066] CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G Hardware name: Huawei Cloud OpenStack Nova, BIOS RIP: 0010:console_unlock+0x343/0x540 RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247 RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0 R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vprintk_emit+0x193/0x280 printk+0x52/0x6e dump_task+0x114/0x130 mem_cgroup_scan_tasks+0x76/0x100 dump_header+0x1fe/0x210 oom_kill_process+0xd1/0x100 out_of_memory+0x125/0x570 mem_cgroup_out_of_memory+0xb5/0xd0 try_charge+0x720/0x770 mem_cgroup_try_charge+0x86/0x180 mem_cgroup_try_charge_delay+0x1c/0x40 do_anonymous_page+0xb5/0x390 handle_mm_fault+0xc4/0x1f0 This is because thousands of processes are in the OOM cgroup, it takes a long time to traverse all of them. As a result, this lead to soft lockup in the OOM process. To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks' function per 1000 iterations. For global OOM, call 'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix NULL pointer dereference on certain command aborts If a command is queued to the final usable TRB of a ring segment, the enqueue pointer is advanced to the subsequent link TRB and no further. If the command is later aborted, when the abort completion is handled the dequeue pointer is advanced to the first TRB of the next segment. If no further commands are queued, xhci_handle_stopped_cmd_ring() sees the ring pointers unequal and assumes that there is a pending command, so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL. Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell ring likely is unnecessary too, but it's harmless. Leave it alone. This is probably Bug 219532, but no confirmation has been received. The issue has been independently reproduced and confirmed fixed using a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever. Everything continued working normally after several prevented crashes.

In the Linux kernel, the following vulnerability has been resolved: xfrm: state: fix out-of-bounds read during lookup lookup and resize can run in parallel. The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array. rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask; While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) { This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again). Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent. The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side. xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.

In the Linux kernel, the following vulnerability has been resolved: i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition In dw_i3c_common_probe, &master->hj_work is bound with dw_i3c_hj_work. And dw_i3c_master_irq_handler can call dw_i3c_master_irq_handle_ibis function to start the work. If we remove the module which will call dw_i3c_common_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dw_i3c_hj_work dw_i3c_common_remove | i3c_master_unregister(&master->base) | device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in dw_i3c_common_remove.

In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix assumption that Resolution Multipliers must be in Logical Collections A report in 2019 by the syzbot fuzzer was found to be connected to two errors in the HID core associated with Resolution Multipliers. One of the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop in hid_apply_multiplier."), but the other has not been fixed. This error arises because hid_apply_multipler() assumes that every Resolution Multiplier control is contained in a Logical Collection, i.e., there's no way the routine can ever set multiplier_collection to NULL. This is in spite of the fact that the function starts with a big comment saying: * "The Resolution Multiplier control must be contained in the same * Logical Collection as the control(s) to which it is to be applied. ... * If no Logical Collection is * defined, the Resolution Multiplier is associated with all * controls in the report." * HID Usage Table, v1.12, Section 4.3.1, p30 * * Thus, search from the current collection upwards until we find a * logical collection... The comment and the code overlook the possibility that none of the collections found may be a Logical Collection. The fix is to set the multiplier_collection pointer to NULL if the collection found isn't a Logical Collection.

A NULL pointer access may result in compromised availability.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links In mt7925_change_vif_links() devm_kzalloc() may return NULL but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix read pointer after free in ath12k_mac_assign_vif_to_vdev() In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different radio, it gets deleted from that radio through a call to ath12k_mac_unassign_link_vif(). This action frees the arvif pointer. Subsequently, there is a check involving arvif, which will result in a read-after-free scenario. Fix this by moving this check after arvif is again assigned via call to ath12k_mac_assign_link_vif(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: remove cpu latency qos request on error Fix cpu latency qos list corruption like below. It happens when we do not remove cpu latency request on error path and free corresponding memory. [ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8). [ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0 <snip> [ 30.634640] l7 kernel: Call Trace: [ 30.634650] l7 kernel: <TASK> [ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6 [ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634690] l7 kernel: ? report_bug+0xff/0x140 [ 30.634702] l7 kernel: ? handle_bug+0x58/0x90 [ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70 [ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20 [ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634742] l7 kernel: plist_add+0xdd/0x140 [ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0 [ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0 [ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033]

In the Linux kernel, the following vulnerability has been resolved: tpm: Change to kvalloc() in eventlog/acpi.c The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action().

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar() In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") set_bar() was modified to support dynamically changing the backing physical address of a BAR that was already configured. This means that set_bar() can be called twice, without ever calling clear_bar() (as calling clear_bar() would clear the BAR's PCI address assigned by the host). This can only be done if the new BAR size/flags does not differ from the existing BAR configuration. Add these missing checks. If we allow set_bar() to set e.g. a new BAR size that differs from the existing BAR size, the new address translation range will be smaller than the BAR size already determined by the host, which would mean that a read past the new BAR size would pass the iATU untranslated, which could allow the host to read memory not belonging to the new struct pci_epf_bar. While at it, add comments which clarifies the support for dynamically changing the physical address of a BAR. (Which was also missing.)

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params Each cpu DAI should associate with a widget. However, the topology might not create the right number of DAI widgets for aggregated amps. And it will cause NULL pointer deference. Check that the DAI widget associated with the CPU DAI is valid to prevent NULL pointer deference due to missing DAI widgets in topologies with aggregated amps.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961 CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 16026: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147 new_sync_write fs/read_write.c:586 [inline] vfs_write+0xaeb/0xd30 fs/read_write.c:679 ksys_write+0x18f/0x2b0 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 16022: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x196/0x420 mm/slub.c:4746 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1209 sock_ioctl+0x626/0x8e0 net/socket.c:1328 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix for out-of bound access error Selfgen stats are placed in a buffer using print_array_to_buf_index() function. Array length parameter passed to the function is too big, resulting in possible out-of bound memory error. Decreasing buffer size by one fixes faulty upper bound of passed array. Discovered in coverity scan, CID 1600742 and CID 1600758

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Add NULL check in mt_input_configured devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt_input_configured() is not checked. Add NULL check in mt_input_configured(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prohibit deactivating all links In the internal API this calls this is a WARN_ON, but that should remain since internally we want to know about bugs that may cause this. Prevent deactivating all links in the debugfs write directly.

In the Linux kernel, the following vulnerability has been resolved: rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read The nvmem interface supports variable buffer sizes, while the regmap interface operates with fixed-size storage. If an nvmem client uses a buffer size less than 4 bytes, regmap_read will write out of bounds as it expects the buffer to point at an unsigned int. Fix this by using an intermediary unsigned int to hold the value.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: remove unused check_buddy_priv Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global list of private data structures. Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") started adding the private data to that list at probe time and added a hook, check_buddy_priv to find the private data from a similar device. However, that function was never used. Besides, though there is a lock for that list, it is never used. And when the probe fails, the private data is never removed from the list. This would cause a second probe to access freed memory. Remove the unused hook, structures and members, which will prevent the potential race condition on the list and its corruption during a second probe when probe fails.

In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - do not transfer req when tegra init fails The tegra_cmac_init or tegra_sha_init function may return an error when memory is exhausted. It should not transfer the request when they return an error.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: don't use soc_pcm_ret() on .prepare callback commit 1f5664351410 ("ASoC: lower "no backend DAIs enabled for ... Port" log severity") ignores -EINVAL error message on common soc_pcm_ret(). It is used from many functions, ignoring -EINVAL is over-kill. The reason why -EINVAL was ignored was it really should only be used upon invalid parameters coming from userspace and in that case we don't want to log an error since we do not want to give userspace a way to do a denial-of-service attack on the syslog / diskspace. So don't use soc_pcm_ret() on .prepare callback is better idea.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking.

No description is available for this CVE.

In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: add bounds checks to host bulk flow fairness counts Even though we fixed a logic error in the commit cited below, syzbot still managed to trigger an underflow of the per-host bulk flow counters, leading to an out of bounds memory access. To avoid any such logic errors causing out of bounds memory accesses, this commit factors out all accesses to the per-host bulk flow counters to a series of helpers that perform bounds-checking before any increments and decrements. This also has the benefit of improving readability by moving the conditional checks for the flow mode into these helpers, instead of having them spread out throughout the code (which was the cause of the original logic error). As part of this change, the flow quantum calculation is consolidated into a helper function, which means that the dithering applied to the ost load scaling is now applied both in the DRR rotation and when a sparse flow's quantum is first initiated. The only user-visible effect of this is that the maximum packet size that can be sent while a flow stays sparse will now vary with +/- one byte in some cases. This should not make a noticeable difference in practice, and thus it's not worth complicating the code to preserve the old behaviour.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix use-after-free in ipvlan_get_iflink(). syzbot presented an use-after-free report [0] regarding ipvlan and linkwatch. ipvlan does not hold a refcnt of the lower device unlike vlan and macvlan. If the linkwatch work is triggered for the ipvlan dev, the lower dev might have already been freed, resulting in UAF of ipvlan->phy_dev in ipvlan_get_iflink(). We can delay the lower dev unregistration like vlan and macvlan by holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and releasing it in dev->priv_destructor(). Jakub pointed out calling .ndo_XXX after unregister_netdevice() has returned is error prone and suggested [1] addressing this UAF in the core by taking commit 750e51603395 ("net: avoid potential UAF in default_operstate()") further. Let's assume unregistering devices DOWN and use RCU protection in default_operstate() not to race with the device unregistration. [0]: BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944 CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47 Hardware name: linux,dummy-virt (DT) Workqueue: events_unbound linkwatch_event Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380 ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 dev_get_iflink+0x7c/0xd8 net/core/dev.c:674 default_operstate net/core/link_watch.c:45 [inline] rfc2863_policy+0x144/0x360 net/core/link_watch.c:72 linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175 __linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239 linkwatch_event+0x64/0xa8 net/core/link_watch.c:282 process_one_work+0x700/0x1398 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391 kthread+0x2b0/0x360 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 Allocated by task 9303: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4283 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650 alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209 rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771 __rtnl_newlink net/core/rtnetlink.c:3896 [inline] rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x2ec/0x438 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __arm64_sys_sendto+0xe4/0x110 net/socket.c:2200 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el ---truncated---

In the Linux kernel, the following vulnerability has been resolved: io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period io_eventfd_do_signal() is invoked from an RCU callback, but when dropping the reference to the io_ev_fd, it calls io_eventfd_free() directly if the refcount drops to zero. This isn't correct, as any potential freeing of the io_ev_fd should be deferred another RCU grace period. Just call io_eventfd_put() rather than open-code the dec-and-test and free, which will correctly defer it another RCU grace period.

In the Linux kernel, the following vulnerability has been resolved: zram: fix potential UAF of zram table If zram_meta_alloc failed early, it frees allocated zram->table without setting it NULL. Which will potentially cause zram_meta_free to access the table if user reset an failed and uninitialized device.

In the Linux kernel, the following vulnerability has been resolved: pktgen: Avoid out-of-bounds access in get_imix_entries Passing a sufficient amount of imix entries leads to invalid access to the pkt_dev->imix_entries array because of the incorrect boundary check. UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24 index 20 is out of range for type 'imix_pkt [20]' CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl lib/dump_stack.c:117 __ubsan_handle_out_of_bounds lib/ubsan.c:429 get_imix_entries net/core/pktgen.c:874 pktgen_if_write net/core/pktgen.c:1063 pde_write fs/proc/inode.c:334 proc_reg_write fs/proc/inode.c:346 vfs_write fs/read_write.c:593 ksys_write fs/read_write.c:644 do_syscall_64 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130 Found by Linux Verification Center (linuxtesting.org) with SVACE. [ fp: allow to fill the array completely; minor changelog cleanup ]

In the Linux kernel, the following vulnerability has been resolved: cachestat: fix page cache statistics permission checking When the 'cachestat()' system call was added in commit cf264e1329fb ("cachestat: implement cachestat syscall"), it was meant to be a much more convenient (and performant) version of mincore() that didn't need mapping things into the user virtual address space in order to work. But it ended up missing the "check for writability or ownership" fix for mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore() more conservative"). This just adds equivalent logic to 'cachestat()', modified for the file context (rather than vma).

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: properly synchronize freeing resources during CPU hotunplug In zswap_compress() and zswap_decompress(), the per-CPU acomp_ctx of the current CPU at the beginning of the operation is retrieved and used throughout. However, since neither preemption nor migration are disabled, it is possible that the operation continues on a different CPU. If the original CPU is hotunplugged while the acomp_ctx is still in use, we run into a UAF bug as some of the resources attached to the acomp_ctx are freed during hotunplug in zswap_cpu_comp_dead() (i.e. acomp_ctx.buffer, acomp_ctx.req, or acomp_ctx.acomp). The problem was introduced in commit 1ec3b5fe6eec ("mm/zswap: move to use crypto_acomp API for hardware acceleration") when the switch to the crypto_acomp API was made. Prior to that, the per-CPU crypto_comp was retrieved using get_cpu_ptr() which disables preemption and makes sure the CPU cannot go away from under us. Preemption cannot be disabled with the crypto_acomp API as a sleepable context is needed. Use the acomp_ctx.mutex to synchronize CPU hotplug callbacks allocating and freeing resources with compression/decompression paths. Make sure that acomp_ctx.req is NULL when the resources are freed. In the compression/decompression paths, check if acomp_ctx.req is NULL after acquiring the mutex (meaning the CPU was offlined) and retry on the new CPU. The initialization of acomp_ctx.mutex is moved from the CPU hotplug callback to the pool initialization where it belongs (where the mutex is allocated). In addition to adding clarity, this makes sure that CPU hotplug cannot reinitialize a mutex that is already locked by compression/decompression. Previously a fix was attempted by holding cpus_read_lock() [1]. This would have caused a potential deadlock as it is possible for code already holding the lock to fall into reclaim and enter zswap (causing a deadlock). A fix was also attempted using SRCU for synchronization, but Johannes pointed out that synchronize_srcu() cannot be used in CPU hotplug notifiers [2]. Alternative fixes that were considered/attempted and could have worked: - Refcounting the per-CPU acomp_ctx. This involves complexity in handling the race between the refcount dropping to zero in zswap_[de]compress() and the refcount being re-initialized when the CPU is onlined. - Disabling migration before getting the per-CPU acomp_ctx [3], but that's discouraged and is a much bigger hammer than needed, and could result in subtle performance issues. [1]https://lkml.kernel.org/20241219212437.2714151-1-yosryahmed@google.com/ [2]https://lkml.kernel.org/20250107074724.1756696-2-yosryahmed@google.com/ [3]https://lkml.kernel.org/20250107222236.2715883-2-yosryahmed@google.com/ [yosryahmed@google.com: remove comment]

In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths.

In the Linux kernel, the following vulnerability has been resolved: pfifo_tail_enqueue: Drop new packet when sch->limit == 0 Expected behaviour: In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a packet in scheduler's queue and decrease scheduler's qlen by one. Then, pfifo_tail_enqueue() enqueue new packet and increase scheduler's qlen by one. Finally, pfifo_tail_enqueue() return `NET_XMIT_CN` status code. Weird behaviour: In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a scheduler that has no packet, the 'drop a packet' step will do nothing. This means the scheduler's qlen still has value equal 0. Then, we continue to enqueue new packet and increase scheduler's qlen by one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by one and return `NET_XMIT_CN` status code. The problem is: Let's say we have two qdiscs: Qdisc_A and Qdisc_B. - Qdisc_A's type must have '->graft()' function to create parent/child relationship. Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`. - Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`. - Qdisc_B is configured to have `sch->limit == 0`. - Qdisc_A is configured to route the enqueued's packet to Qdisc_B. Enqueue packet through Qdisc_A will lead to: - hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B) - Qdisc_B->q.qlen += 1 - pfifo_tail_enqueue() return `NET_XMIT_CN` - hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A. The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1. Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem. This violate the design where parent's qlen should equal to the sum of its childrens'qlen. Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable.

In the Linux kernel, the following vulnerability has been resolved: padata: avoid UAF for reorder_work Although the previous patch can avoid ps and ps UAF for _do_serial, it can not avoid potential UAF issue for reorder_work. This issue can happen just as below: crypto_request crypto_request crypto_del_alg padata_do_serial ... padata_reorder // processes all remaining // requests then breaks while (1) { if (!padata) break; ... } padata_do_serial // new request added list_add // sees the new request queue_work(reorder_work) padata_reorder queue_work_on(squeue->work) ... <kworker context> padata_serial_worker // completes new request, // no more outstanding // requests crypto_del_alg // free pd <kworker context> invoke_padata_reorder // UAF of pd To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work' into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.

A use-after-free vulnerability was found in the Linux kernel's padata subsystem, in the `padata_reorder()` function. Caused by improper synchronization controls, this vulnerability can occur when a reference-counted data structure (`pd`) is decremented in one thread, freeing it, while another thread still holds a pointer to it and attempts to access it via `padata_find_next()`. This vulnerability can lead to system instability, denial of service, and potential privilege escalation.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error This patch addresses a race condition for an ODP MR that can result in a CQE with an error on the UMR QP. During the __mlx5_ib_dereg_mr() flow, the following sequence of calls occurs: mlx5_revoke_mr() mlx5r_umr_revoke_mr() mlx5r_umr_post_send_wait() At this point, the lkey is freed from the hardware's perspective. However, concurrently, mlx5_ib_invalidate_range() might be triggered by another task attempting to invalidate a range for the same freed lkey. This task will: - Acquire the umem_odp->umem_mutex lock. - Call mlx5r_umr_update_xlt() on the UMR QP. - Since the lkey has already been freed, this can lead to a CQE error, causing the UMR QP to enter an error state [1]. To resolve this race condition, the umem_odp->umem_mutex lock is now also acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke, we set umem_odp->private which points to that MR to NULL, preventing any further invalidation attempts on its lkey. [1] From dmesg: infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2 WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] [..] Call Trace: <TASK> mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib] mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x1e1/0x240 zap_page_range_single+0xf1/0x1a0 madvise_vma_behavior+0x677/0x6e0 do_madvise+0x1a2/0x4b0 __x64_sys_madvise+0x25/0x30 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: ata: libata-sff: Ensure that we cannot write outside the allocated buffer reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Check the return value of of_property_read_string_index() Somewhen between 6.10 and 6.11 the driver started to crash on my MacBookPro14,3. The property doesn't exist and 'tmp' remains uninitialized, so we pass a random pointer to devm_kstrdup(). The crash I am getting looks like this: BUG: unable to handle page fault for address: 00007f033c669379 PF: supervisor read access in kernel mode PF: error_code(0x0001) - permissions violation PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025 Oops: Oops: 0001 [#1] SMP PTI CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1 Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024 RIP: 0010:strlen+0x4/0x30 Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001 RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379 RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8 R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30 FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x149/0x4c0 ? raw_spin_rq_lock_nested+0xe/0x20 ? sched_balance_newidle+0x22b/0x3c0 ? update_load_avg+0x78/0x770 ? exc_page_fault+0x6f/0x150 ? asm_exc_page_fault+0x26/0x30 ? __pfx_pci_conf1_write+0x10/0x10 ? strlen+0x4/0x30 devm_kstrdup+0x25/0x70 brcmf_of_probe+0x273/0x350 [brcmfmac]

In the Linux kernel, the following vulnerability has been resolved: openvswitch: use RCU protection in ovs_vport_cmd_fill_info() ovs_vport_cmd_fill_info() can be called without RTNL or RCU. Use RCU protection and dev_net_rcu() to avoid potential UAF.

In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix incorrect autogroup migration detection scx_move_task() is called from sched_move_task() and tells the BPF scheduler that cgroup migration is being committed. sched_move_task() is used by both cgroup and autogroup migrations and scx_move_task() tried to filter out autogroup migrations by testing the destination cgroup and PF_EXITING but this is not enough. In fact, without explicitly tagging the thread which is doing the cgroup migration, there is no good way to tell apart scx_move_task() invocations for racing migration to the root cgroup and an autogroup migration. This led to scx_move_task() incorrectly ignoring a migration from non-root cgroup to an autogroup of the root cgroup triggering the following warning: WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340 ... Call Trace: <TASK> cgroup_migrate_execute+0x5b1/0x700 cgroup_attach_task+0x296/0x400 __cgroup_procs_write+0x128/0x140 cgroup_procs_write+0x17/0x30 kernfs_fop_write_iter+0x141/0x1f0 vfs_write+0x31d/0x4a0 __x64_sys_write+0x72/0xf0 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it by adding an argument to sched_move_task() that indicates whether the moving is for a cgroup or autogroup migration. After the change, scx_move_task() is called only for cgroup migrations and renamed to scx_cgroup_move_task().

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Validate the persistent meta data subbuf array The meta data for a mapped ring buffer contains an array of indexes of all the subbuffers. The first entry is the reader page, and the rest of the entries lay out the order of the subbuffers in how the ring buffer link list is to be created. The validator currently makes sure that all the entries are within the range of 0 and nr_subbufs. But it does not check if there are any duplicates. While working on the ring buffer, I corrupted this array, where I added duplicates. The validator did not catch it and created the ring buffer link list on top of it. Luckily, the corruption was only that the reader page was also in the writer path and only presented corrupted data but did not crash the kernel. But if there were duplicates in the writer side, then it could corrupt the ring buffer link list and cause a crash. Create a bitmask array with the size of the number of subbuffers. Then clear it. When walking through the subbuf array checking to see if the entries are within the range, test if its bit is already set in the subbuf_mask. If it is, then there is duplicates and fail the validation. If not, set the corresponding bit and continue.

In the Linux kernel, the following vulnerability has been resolved: arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array The loop that detects/populates cache information already has a bounds check on the array size but does not account for cache levels with separate data/instructions cache. Fix this by incrementing the index for any populated leaf (instead of any populated level).

A vulnerability was found in the Linux kernel's work queue subsystem, which manages background task execution. The issue stems from improper handling of the "rescuer" thread during the cleanup of unbound work queues.

In the Linux kernel, the following vulnerability has been resolved: vxlan: check vxlan_vnigroup_init() return value vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline]

A use-after-free vulnerability was found in the Linux kernel. l3mdev_l3_out() can be called without RCU being held, causing damage to the availability of the system.

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix hang in nfsd4_shutdown_callback If nfs4_client is in courtesy state then there is no point to send the callback. This causes nfsd4_shutdown_callback to hang since cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP notifies NFSD that the connection was dropped. This patch modifies nfsd4_run_cb_work to skip the RPC call if nfs4_client is in courtesy state.

In the Linux kernel, the following vulnerability has been resolved: nfsd: clear acl_access/acl_default after releasing them If getting acl_default fails, acl_access and acl_default will be released simultaneously. However, acl_access will still retain a pointer pointing to the released posix_acl, which will trigger a WARNING in nfs3svc_release_getacl like this: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 26 PID: 3199 at lib/refcount.c:28 refcount_warn_saturate+0xb5/0x170 Modules linked in: CPU: 26 UID: 0 PID: 3199 Comm: nfsd Not tainted 6.12.0-rc6-00079-g04ae226af01f-dirty #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb5/0x170 Code: cc cc 0f b6 1d b3 20 a5 03 80 fb 01 0f 87 65 48 d8 00 83 e3 01 75 e4 48 c7 c7 c0 3b 9b 85 c6 05 97 20 a5 03 01 e8 fb 3e 30 ff <0f> 0b eb cd 0f b6 1d 8a3 RSP: 0018:ffffc90008637cd8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83904fde RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88871ed36380 RBP: ffff888158beeb40 R08: 0000000000000001 R09: fffff520010c6f56 R10: ffffc90008637ab7 R11: 0000000000000001 R12: 0000000000000001 R13: ffff888140e77400 R14: ffff888140e77408 R15: ffffffff858b42c0 FS: 0000000000000000(0000) GS:ffff88871ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562384d32158 CR3: 000000055cc6a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? refcount_warn_saturate+0xb5/0x170 ? __warn+0xa5/0x140 ? refcount_warn_saturate+0xb5/0x170 ? report_bug+0x1b1/0x1e0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? tick_nohz_tick_stopped+0x1e/0x40 ? refcount_warn_saturate+0xb5/0x170 ? refcount_warn_saturate+0xb5/0x170 nfs3svc_release_getacl+0xc9/0xe0 svc_process_common+0x5db/0xb60 ? __pfx_svc_process_common+0x10/0x10 ? __rcu_read_unlock+0x69/0xa0 ? __pfx_nfsd_dispatch+0x10/0x10 ? svc_xprt_received+0xa1/0x120 ? xdr_init_decode+0x11d/0x190 svc_process+0x2a7/0x330 svc_handle_xprt+0x69d/0x940 svc_recv+0x180/0x2d0 nfsd+0x168/0x200 ? __pfx_nfsd+0x10/0x10 kthread+0x1a2/0x1e0 ? kthread+0xf4/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... Clear acl_access/acl_default after posix_acl_release is called to prevent UAF from being triggered.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject mismatching sum of field_len with set key length The field length description provides the length of each separated key field in the concatenation, each field gets rounded up to 32-bits to calculate the pipapo rule width from pipapo_init(). The set key length provides the total size of the key aligned to 32-bits. Register-based arithmetics still allows for combining mismatching set key length and field length description, eg. set key length 10 and field description [ 5, 4 ] leading to pipapo width of 12.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't flush non-uploaded STAs If STA state is pre-moved to AUTHORIZED (such as in IBSS scenarios) and insertion fails, the station is freed. In this case, the driver never knew about the station, so trying to flush it is unexpected and may crash. Check if the sta was uploaded to the driver before and fix this.

No description is available for this CVE.

In the Linux kernel, the following vulnerability has been resolved: smb: client: Add check for next_buffer in receive_encrypted_standard() Add check for the return value of cifs_buf_get() and cifs_small_buf_get() in receive_encrypted_standard() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (strange) permission model and has almost no regression risk. This api should stop to exist though.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix softlockup in arena_map_free on 64k page kernel On an aarch64 kernel with CONFIG_PAGE_SIZE_64KB=y, arena_htab tests cause a segmentation fault and soft lockup. The same failure is not observed with 4k pages on aarch64. It turns out arena_map_free() is calling apply_to_existing_page_range() with the address returned by bpf_arena_get_kern_vm_start(). If this address is not page-aligned the code ends up calling apply_to_pte_range() with that unaligned address causing soft lockup. Fix it by round up GUARD_SZ to PAGE_SIZE << 1 so that the division by 2 in bpf_arena_get_kern_vm_start() returns a page-aligned value.

In the Linux kernel, the following vulnerability has been resolved: bpf: avoid holding freeze_mutex during mmap operation We use map->freeze_mutex to prevent races between map_freeze() and memory mapping BPF map contents with writable permissions. The way we naively do this means we'll hold freeze_mutex for entire duration of all the mm and VMA manipulations, which is completely unnecessary. This can potentially also lead to deadlocks, as reported by syzbot in [0]. So, instead, hold freeze_mutex only during writeability checks, bump (proactively) "write active" count for the map, unlock the mutex and proceed with mmap logic. And only if something went wrong during mmap logic, then undo that "write active" counter increment. [0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Don't reference skb after sending to VIOS Previously, after successfully flushing the xmit buffer to VIOS, the tx_bytes stat was incremented by the length of the skb. It is invalid to access the skb memory after sending the buffer to the VIOS because, at any point after sending, the VIOS can trigger an interrupt to free this memory. A race between reading skb->len and freeing the skb is possible (especially during LPM) and will result in use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic] Read of size 4 at addr c00000024eb48a70 by task hxecom/14495 <...> Call Trace: [c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable) [c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0 [c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8 [c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0 [c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic] [c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358 <...> Freed by task 0: kasan_save_stack+0x34/0x68 kasan_save_track+0x2c/0x50 kasan_save_free_info+0x64/0x108 __kasan_mempool_poison_object+0x148/0x2d4 napi_skb_cache_put+0x5c/0x194 net_tx_action+0x154/0x5b8 handle_softirqs+0x20c/0x60c do_softirq_own_stack+0x6c/0x88 <...> The buggy address belongs to the object at c00000024eb48a00 which belongs to the cache skbuff_head_cache of size 224 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

A vulnerability was found in the Linux kernel's memory migration system in the migrate_device_finalize() function, where a folio that should be freed is erroneously added back into the Least Recently Used (LRU) list. This issue can lead to memory corruption caused by a use-after-free issue when a previously freed folio is reaccessed, leading to system instability or potential denial of service.

In the Linux kernel, the following vulnerability has been resolved: io_uring: prevent opcode speculation sqe->opcode is used for different tables, make sure we santitise it against speculations.

In the Linux kernel, the following vulnerability has been resolved: tcp: drop secpath at the same time as we currently drop dst Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while running tests that boil down to: - create a pair of netns - run a basic TCP test over ipcomp6 - delete the pair of netns The xfrm_state found on spi_byaddr was not deleted at the time we delete the netns, because we still have a reference on it. This lingering reference comes from a secpath (which holds a ref on the xfrm_state), which is still attached to an skb. This skb is not leaked, it ends up on sk_receive_queue and then gets defer-free'd by skb_attempt_defer_free. The problem happens when we defer freeing an skb (push it on one CPU's defer_list), and don't flush that list before the netns is deleted. In that case, we still have a reference on the xfrm_state that we don't expect at this point. We already drop the skb's dst in the TCP receive path when it's no longer needed, so let's also drop the secpath. At this point, tcp_filter has already called into the LSM hooks that may require the secpath, so it should not be needed anymore. However, in some of those places, the MPTCP extension has just been attached to the skb, so we cannot simply drop all extensions.

In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods.

In the Linux kernel, the following vulnerability has been resolved: hwpoison, memory_hotplug: lock folio before unmap hwpoisoned folio Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined) add page poison checks in do_migrate_range in order to make offline hwpoisoned page possible by introducing isolate_lru_page and try_to_unmap for hwpoisoned page. However folio lock must be held before calling try_to_unmap. Add it to fix this problem. Warning will be produced if folio is not locked during unmap: ------------[ cut here ]------------ kernel BUG at ./include/linux/swapops.h:400! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 4 UID: 0 PID: 411 Comm: bash Tainted: G W 6.13.0-rc1-00016-g3c434c7ee82a-dirty #41 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0xb08/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0xb08/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c Code: f9407be0 b5fff320 d4210000 17ffff97 (d4210000) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: netmem: prevent TX of unreadable skbs Currently on stable trees we have support for netmem/devmem RX but not TX. It is not safe to forward/redirect an RX unreadable netmem packet into the device's TX path, as the device may call dma-mapping APIs on dma addrs that should not be passed to it. Fix this by preventing the xmit of unreadable skbs. Tested by configuring tc redirect: sudo tc qdisc add dev eth1 ingress sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \ tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1 Before, I see unreadable skbs in the driver's TX path passed to dma mapping APIs. After, I don't see unreadable skbs in the driver's TX path passed to dma mapping APIs.

In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer.

In the Linux kernel, the following vulnerability has been resolved: nfsd: put dl_stid if fail to queue dl_recall Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we increment the reference count of dl_stid. We expect that after the corresponding work_struct is processed, the reference count of dl_stid will be decremented through the callback function nfsd4_cb_recall_release. However, if the call to nfsd4_run_cb fails, the incremented reference count of dl_stid will not be decremented correspondingly, leading to the following nfs4_stid leak: unreferenced object 0xffff88812067b578 (size 344): comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........ 00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N.. backtrace: kmem_cache_alloc+0x4b9/0x700 nfsd4_process_open1+0x34/0x300 nfsd4_open+0x2d1/0x9d0 nfsd4_proc_compound+0x7a2/0xe30 nfsd_dispatch+0x241/0x3e0 svc_process_common+0x5d3/0xcc0 svc_process+0x2a3/0x320 nfsd+0x180/0x2e0 kthread+0x199/0x1d0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 unreferenced object 0xffff8881499f4d28 (size 368): comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I.... 30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... ....... backtrace: kmem_cache_alloc+0x4b9/0x700 nfs4_alloc_stid+0x29/0x210 alloc_init_deleg+0x92/0x2e0 nfs4_set_delegation+0x284/0xc00 nfs4_open_delegation+0x216/0x3f0 nfsd4_process_open2+0x2b3/0xee0 nfsd4_open+0x770/0x9d0 nfsd4_proc_compound+0x7a2/0xe30 nfsd_dispatch+0x241/0x3e0 svc_process_common+0x5d3/0xcc0 svc_process+0x2a3/0x320 nfsd+0x180/0x2e0 kthread+0x199/0x1d0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if fail to queue dl_recall.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_tunnel: fix geneve_opt type confusion addition When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the parsing logic should place every geneve_opt structure one by one compactly. Hence, when deciding the next geneve_opt position, the pointer addition should be in units of char *. However, the current implementation erroneously does type conversion before the addition, which will lead to heap out-of-bounds write. [ 6.989857] ================================================================== [ 6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70 [ 6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178 [ 6.991162] [ 6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1 [ 6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 6.992281] Call Trace: [ 6.992423] <TASK> [ 6.992586] dump_stack_lvl+0x44/0x5c [ 6.992801] print_report+0x184/0x4be [ 6.993790] kasan_report+0xc5/0x100 [ 6.994252] kasan_check_range+0xf3/0x1a0 [ 6.994486] memcpy+0x38/0x60 [ 6.994692] nft_tunnel_obj_init+0x977/0xa70 [ 6.995677] nft_obj_init+0x10c/0x1b0 [ 6.995891] nf_tables_newobj+0x585/0x950 [ 6.996922] nfnetlink_rcv_batch+0xdf9/0x1020 [ 6.998997] nfnetlink_rcv+0x1df/0x220 [ 6.999537] netlink_unicast+0x395/0x530 [ 7.000771] netlink_sendmsg+0x3d0/0x6d0 [ 7.001462] __sock_sendmsg+0x99/0xa0 [ 7.001707] ____sys_sendmsg+0x409/0x450 [ 7.002391] ___sys_sendmsg+0xfd/0x170 [ 7.003145] __sys_sendmsg+0xea/0x170 [ 7.004359] do_syscall_64+0x5e/0x90 [ 7.005817] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 7.006127] RIP: 0033:0x7ec756d4e407 [ 7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407 [ 7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003 [ 7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000 [ 7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8 Fix this bug with correct pointer addition and conversion in parse and dump code.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") accidentally almost exposed hw counters to non-init net namespaces. It didn't expose them fully, as an attempt to read any of those counters leads to a crash like this one: [42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028 [42021.814463] #PF: supervisor read access in kernel mode [42021.819549] #PF: error_code(0x0000) - not-present page [42021.824636] PGD 0 P4D 0 [42021.827145] Oops: 0000 [#1] SMP PTI [42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX [42021.841697] Hardware name: XXX [42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core] [42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48 [42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287 [42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000 [42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0 [42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000 [42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530 [42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000 [42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000 [42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0 [42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42021.949324] Call Trace: [42021.951756] <TASK> [42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70 [42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0 [42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0 [42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0 [42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30 [42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core] [42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core] [42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50 [42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0 [42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410 [42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0 [42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0 [42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0 [42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2 The problem can be reproduced using the following steps: ip netns add foo ip netns exec foo bash cat /sys/class/infiniband/mlx4_0/hw_counters/* The panic occurs because of casting the device pointer into an ib_device pointer using container_of() in hw_stat_device_show() is wrong and leads to a memory corruption. However the real problem is that hw counters should never been exposed outside of the non-init net namespace. Fix this by saving the index of the corresponding attribute group (it might be 1 or 2 depending on the presence of driver-specific attributes) and zeroing the pointer to hw_counters group for compat devices during the initialization. With this fix applied hw_counters are not available in a non-init net namespace: find /sys/class/infiniband/mlx4_0/ -name hw_counters /sys/class/infiniband/mlx4_0/ports/1/hw_counters /sys/class/infiniband/mlx4_0/ports/2/hw_counters /sys/class/infiniband/mlx4_0/hw_counters ip netns add foo ip netns exec foo bash find /sys/class/infiniband/mlx4_0/ -name hw_counters

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix NULL dereference in SR-IOV VF creation error path Clean up when virtfn setup fails to prevent NULL pointer dereference during device removal. The kernel oops below occurred due to incorrect error handling flow when pci_setup_device() fails. Add pci_iov_scan_device(), which handles virtfn allocation and setup and cleans up if pci_setup_device() fails, so pci_iov_add_virtfn() doesn't need to call pci_stop_and_remove_bus_device(). This prevents accessing partially initialized virtfn devices during removal. BUG: kernel NULL pointer dereference, address: 00000000000000d0 RIP: 0010:device_del+0x3d/0x3d0 Call Trace: pci_remove_bus_device+0x7c/0x100 pci_iov_add_virtfn+0xfa/0x200 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x6a/0x160 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 [bhelgaas: commit log, return ERR_PTR(-ENOMEM) directly]

In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: init wiphy_work before allocating rfkill fails syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1] After rfkill allocation fails, the wiphy release process will be performed, which will cause cfg80211_dev_free to access the uninitialized wiphy_work related data. Move the initialization of wiphy_work to before rfkill initialization to avoid this issue. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 assign_lock_key kernel/locking/lockdep.c:983 [inline] register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297 __lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162 cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196 device_release+0xa1/0x240 drivers/base/core.c:2568 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1e4/0x5a0 lib/kobject.c:737 put_device+0x1f/0x30 drivers/base/core.c:3774 wiphy_free net/wireless/core.c:1224 [inline] wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562 ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835 mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185 hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029

In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath11k_pci_alloc_msi(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This results in the below warning: WARNING: CPU: 7 PID: 349 at kernel/irq/manage.c:1929 free_irq+0x278/0x29c Call trace: free_irq+0x278/0x29c ath11k_pcic_free_irq+0x70/0x10c [ath11k] ath11k_pci_probe+0x800/0x820 [ath11k_pci] local_pci_probe+0x40/0xbc The warning is due to not clearing the affinity hint before freeing the IRQs. So to fix this issue, clear the IRQ affinity hint before calling ath11k_pcic_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1

An out-of-bounds read vulnerability exists in the ppp_sync_txmunge() function in the Linux kernel's PPP subsystem. Insufficient bounds checking on incoming PPP packets may lead to a kernel crash if a packet with an empty or truncated payload is processed.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq.

A use-after-free flaw was found in KVM for arm64 in the Linux Kernel, if the kvm_arch_vcpu_create() fails to share the vCPU page with the hypervisor. This vulnerability could even lead to a kernel information leak problem.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix NULL pointer access This patch ensures that the UCSI driver waits for all pending tasks in the ucsi_displayport_work workqueue to finish executing before proceeding with the partner removal.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator BPF programs may call next() and destroy() on BPF iterators even after new() returns an error value (e.g. bpf_for_each() macro ignores error returns from new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized state after an error return causing bpf_iter_scx_dsq_next() to dereference garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that next() and destroy() become noops.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request Make sure that n_channels is set after allocating the struct cfg80211_registered_device::int_scan_req member. Seen with syzkaller: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5 index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]') This was missed in the initial conversions because I failed to locate the allocation likely due to the "sizeof(void *)" not matching the "channels" array type.

In the Linux kernel, the following vulnerability has been resolved: rseq: Fix segfault on registration when rseq_cs is non-zero The rseq_cs field is documented as being set to 0 by user-space prior to registration, however this is not currently enforced by the kernel. This can result in a segfault on return to user-space if the value stored in the rseq_cs field doesn't point to a valid struct rseq_cs. The correct solution to this would be to fail the rseq registration when the rseq_cs field is non-zero. However, some older versions of glibc will reuse the rseq area of previous threads without clearing the rseq_cs field and will also terminate the process if the rseq registration fails in a secondary thread. This wasn't caught in testing because in this case the leftover rseq_cs does point to a valid struct rseq_cs. What we can do is clear the rseq_cs field on registration when it's non-zero which will prevent segfaults on registration and won't break the glibc versions that reuse rseq areas on thread creation.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix uaf in ath12k_core_init() When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: net: phy: mscc: Fix memory leak when using one step timestamping Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping.

In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.

In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call find_lock_lowest_rq method which would take a double lock on both CPUs' runqueues. If one of the locks aren't readily available, it may lead to dropping the current runqueue lock and reacquiring both the locks at once. During this window it is possible that the task is already migrated and is running on some other CPU. These cases are already handled. However, if the task is migrated and has already been executed and another CPU is now trying to wake it up (ttwu) such that it is queued again on the runqeue (on_rq is 1) and also if the task was run by the same CPU, then the current checks will pass even though the task was migrated out and is no longer in the pushable tasks list. Crashes ======= This bug resulted in quite a few flavors of crashes triggering kernel panics with various crash signatures such as assert failures, page faults, null pointer dereferences, and queue corruption errors all coming from scheduler itself. Some of the crashes: -> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? pick_next_task_rt+0x6e/0x1d0 ? do_error_trap+0x64/0xa0 ? pick_next_task_rt+0x6e/0x1d0 ? exc_invalid_op+0x4c/0x60 ? pick_next_task_rt+0x6e/0x1d0 ? asm_exc_invalid_op+0x12/0x20 ? pick_next_task_rt+0x6e/0x1d0 __schedule+0x5cb/0x790 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: kernel NULL pointer dereference, address: 00000000000000c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? __warn+0x8a/0xe0 ? exc_page_fault+0x3d6/0x520 ? asm_exc_page_fault+0x1e/0x30 ? pick_next_task_rt+0xb5/0x1d0 ? pick_next_task_rt+0x8c/0x1d0 __schedule+0x583/0x7e0 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: unable to handle page fault for address: ffff9464daea5900 kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p)) -> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? dequeue_top_rt_rq+0xa2/0xb0 ? do_error_trap+0x64/0xa0 ? dequeue_top_rt_rq+0xa2/0xb0 ? exc_invalid_op+0x4c/0x60 ? dequeue_top_rt_rq+0xa2/0xb0 ? asm_exc_invalid_op+0x12/0x20 ? dequeue_top_rt_rq+0xa2/0xb0 dequeue_rt_entity+0x1f/0x70 dequeue_task_rt+0x2d/0x70 __schedule+0x1a8/0x7e0 ? blk_finish_plug+0x25/0x40 schedule+0x3c/0xb0 futex_wait_queue_me+0xb6/0x120 futex_wait+0xd9/0x240 do_futex+0x344/0xa90 ? get_mm_exe_file+0x30/0x60 ? audit_exe_compare+0x58/0x70 ? audit_filter_rules.constprop.26+0x65e/0x1220 __x64_sys_futex+0x148/0x1f0 do_syscall_64+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x62/0xc7 -> BUG: unable to handle page fault for address: ffff8cf3608bc2c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? spurious_kernel_fault+0x171/0x1c0 ? exc_page_fault+0x3b6/0x520 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? asm_exc_page_fault+0x1e/0x30 ? _cond_resched+0x15/0x30 ? futex_wait_queue_me+0xc8/0x120 ? futex_wait+0xd9/0x240 ? try_to_wake_up+0x1b8/0x490 ? futex_wake+0x78/0x160 ? do_futex+0xcd/0xa90 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? plist_del+0x6a/0xd0 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? dequeue_pushable_task+0x20/0x70 ? __schedule+0x382/0x7e0 ? asm_sysvec_reschedule_i ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix smp_processor_id() call trace for preemptible kernels Correct kernel call trace when calling smp_processor_id() when called in preemptible kernels by using raw_smp_processor_id(). smp_processor_id() checks to see if preemption is disabled and if not, issue an error message followed by a call to dump_stack(). Brief example of call trace: kernel: check_preemption_disabled: 436 callbacks suppressed kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u1025:0/2354 kernel: caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: CPU: 129 PID: 2354 Comm: kworker/u1025:0 kernel: ... kernel: Workqueue: writeback wb_workfn (flush-253:0) kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x34/0x48 kernel: check_preemption_disabled+0xdd/0xe0 kernel: pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: ...

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: <TASK> icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info) KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(), because the source string length was rounded up to the allocation size.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache) KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets(). The code uses mock_coeff_template.length_bytes (4 bytes) for register value allocations. But later, this length is set to 8 bytes which causes test code failures. As fix, just remove the lenght override, keeping the original value 4 for all operations.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Use memcpy() for BIOS version The strlcat() with FORTIFY support is triggering a panic because it thinks the target buffer will overflow although the correct target buffer size is passed in. Anyway, instead of memset() with 0 followed by a strlcat(), just use memcpy() and ensure that the resulting buffer is NULL terminated. BIOSVersion is only used for the lpfc_printf_log() which expects a properly terminated string.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using Running IDXD workloads in a container with the /dev directory mounted can trigger a call trace or even a kernel panic when the parent process of the container is terminated. This issue occurs because, under certain configurations, Docker does not properly propagate the mount replica back to the original mount point. In this case, when the user driver detaches, the WQ is destroyed but it still calls destroy_workqueue() attempting to completes all pending work. It's necessary to check wq->wq and skip the drain if it no longer exists.

In the Linux kernel, the following vulnerability has been resolved: nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails. syzbot reported a warning below [1] following a fault injection in nfs_fs_proc_net_init(). [0] When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed. Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning is logged as the directory is not empty. Let's handle the error of nfs_fs_proc_net_init() properly. [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174) should_failslab (mm/failslab.c:46) kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204) __proc_create (fs/proc/generic.c:427) proc_create_reg (fs/proc/generic.c:554) proc_create_net_data (fs/proc/proc_net.c:120) nfs_fs_proc_net_init (fs/nfs/client.c:1409) nfs_net_init (fs/nfs/inode.c:2600) ops_init (net/core/net_namespace.c:138) setup_net (net/core/net_namespace.c:443) copy_net_ns (net/core/net_namespace.c:576) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4)) ksys_unshare (kernel/fork.c:3123) __x64_sys_unshare (kernel/fork.c:3190) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> [1]: remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs' WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Modules linked in: CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00 RSP: 0018:ffffc90003637b08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8 RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001 RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00 R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000 FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76 ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253 setup_net+0x2e1/0x510 net/core/net_namespace.c:457 copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574 create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218 ksys_unshare+0x45b/0xa40 kernel/fork.c:3121 __do_sys_unshare kernel/fork.c:3192 [inline] __se_sys_unshare kernel/fork.c:3190 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3190 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa1a6b8e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c ---truncated---

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak. sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree htb_lookup_leaf has a BUG_ON that can trigger with the following: tc qdisc del dev lo root tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 64bit tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2:1 handle 3: blackhole ping -I lo -c1 -W0.001 127.0.0.1 The root cause is the following: 1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on the selected leaf qdisc 2. netem_dequeue calls enqueue on the child qdisc 3. blackhole_enqueue drops the packet and returns a value that is not just NET_XMIT_SUCCESS 4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate -> htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase 5. As this is the only class in the selected hprio rbtree, __rb_change_child in __rb_erase_augmented sets the rb_root pointer to NULL 6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL, which causes htb_dequeue_tree to call htb_lookup_leaf with the same hprio rbtree, and fail the BUG_ON The function graph for this scenario is shown here: 0) | htb_enqueue() { 0) + 13.635 us | netem_enqueue(); 0) 4.719 us | htb_activate_prios(); 0) # 2249.199 us | } 0) | htb_dequeue() { 0) 2.355 us | htb_lookup_leaf(); 0) | netem_dequeue() { 0) + 11.061 us | blackhole_enqueue(); 0) | qdisc_tree_reduce_backlog() { 0) | qdisc_lookup_rcu() { 0) 1.873 us | qdisc_match_from_root(); 0) 6.292 us | } 0) 1.894 us | htb_search(); 0) | htb_qlen_notify() { 0) 2.655 us | htb_deactivate_prios(); 0) 6.933 us | } 0) + 25.227 us | } 0) 1.983 us | blackhole_dequeue(); 0) + 86.553 us | } 0) # 2932.761 us | qdisc_warn_nonwc(); 0) | htb_lookup_leaf() { 0) | BUG_ON(); ------------------------------------------ The full original bug report can be seen here [1]. We can fix this just by returning NULL instead of the BUG_ON, as htb_dequeue_tree returns NULL when htb_lookup_leaf returns NULL. [1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix panic during namespace deletion with VF The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it.

A race condition flaw was found in the Linux kernel's netfs subsystem. In the netfs_read_unlock_folios() function, a folio (memory page) may be unlocked prematurely before the ZERO subrequest completes clearing the tail portion of the page beyond the end-of-file. This allows an application using mmap to observe uninitialized kernel memory contents in the uncleared tail region, potentially leading to information disclosure.

A flaw was found in the Linux kernel's Bluetooth HCI UART driver. A race condition exists where the `hci_uart_write_work()` function may attempt to access uninitialized private data if a TTY write wakeup occurs during the protocol initialization phase. This can lead to a NULL pointer dereference, potentially causing a system crash and resulting in a Denial of Service (DoS).

A memory leak flaw was found in the Linux kernel's CIFS/SMB client. In the smb2_open_file() function, request buffers are not properly freed when performing direct I/O writes to a read-only SMB share. This causes slab cache objects to remain allocated, which can prevent the cifs module from unloading cleanly and lead to gradual memory exhaustion with repeated operations.