SEVD-2025-189-03

Vulnerability from csaf_se - Published: 2025-07-08 04:00 - Updated: 2026-02-10 08:00
Summary
EcoStruxure™ Power Operation

Notes

General Security Recommendations
We strongly recommend the following industry cybersecurity best practices. https://www.se.com/us/en/download/document/7EN52-0390/ * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the “Program” mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
For More Information
This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process. For further information related to cybersecurity in Schneider Electric’s products, visit the company’s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
LEGAL DISCLAIMER
THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS “NOTIFICATION”) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN “AS-IS” BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
About Schneider Electric
Schneider's purpose is to create Impact by empowering all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On. Our mission is to be the trusted partner in Sustainability and Efficiency. We are a global industrial technology leader bringing world-leading expertise in electrification, automation and digitization to smart industries, resilient infrastructure, future-proof data centers, intelligent buildings, and intuitive homes. Anchored by our deep domain expertise, we provide integrated end-to-end lifecycle AI enabled Industrial IoT solutions with connected products, automation, software and services, delivering digital twins to enable profitable growth for our customers. We are a people company with an ecosystem of 150,000 colleagues and more than a million partners operating in over 100 countries to ensure proximity to our customers and stakeholders. We embrace diversity and inclusion in everything we do, guided by our meaningful purpose of a sustainable future for all. www.se.com
Overview
Schneider Electric is aware of multiple vulnerabilities disclosed in PostgreSQL. Many vendors, including Schneider Electric, use PostgreSQL in their offers. PostgreSQL is a database server that is used as a data store for multiple products. Schneider Electric installs a version of PostgreSQL with its EcoStruxure™ Power Operation https://www.se.com/us/en/product-range/65405-ecostruxure-power-operation/?parent-subcategory-id=59326966&filter=business-4-low-voltage-products-and-systems#overview software. EcoStruxure™ Power Operation (EPO) is an on-premises software offer that provides a single platform to monitor and control medium and lower power systems. Failure to apply the remediations and mitigations below could result in loss of system functionality or unauthorized access to system functions.
Customers should use appropriate patching methodologies when applying these patches to their systems. We strongly recommend the use of back-ups and evaluating the impact of these patches in a Test and Development environment or on an offline infrastructure. Contact Schneider Electric’s Customer Care Center if you need assistance removing a patch.
Vulnerability Details
A number of transitive vulnerabilities in PostgreSQL pgadmin tool could impact EcoStruxure™ Power Operation software. Please refer to the following CVEs: • CVE-2023-50447 • CVE-2024-28219 • CVE-2022-45198 • CVE-2023-5217 • CVE-2023-35945 • CVE-2023-44487 Additional information about these vulnerabilities can be found on https://www.cve.org/
To clipboard 

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Public",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "We strongly recommend the following industry cybersecurity best practices.\n\nhttps://www.se.com/us/en/download/document/7EN52-0390/\n* Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network.\n* Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks.\n* Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode.\n* Never connect programming software to any network other than the network intended for that device.\n* Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks.\n* Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation.\n* Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet.\n* When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\n\nFor more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.",
        "title": "General Security Recommendations"
      },
      {
        "category": "general",
        "text": "This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process.\nFor further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp",
        "title": "For More Information"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND.  SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION",
        "title": "LEGAL DISCLAIMER"
      },
      {
        "category": "general",
        "text": "Schneider\u0027s purpose is to create Impact by empowering all to make the most of our energy and resources, bridging progress and\r\nsustainability for all. We call this Life Is On.\n\nOur mission is to be the trusted partner in Sustainability and Efficiency.\n\nWe are a global industrial technology leader bringing world-leading expertise in electrification, automation and digitization to smart\r\nindustries, resilient infrastructure, future-proof data centers, intelligent buildings, and intuitive homes. Anchored by our deep\r\ndomain expertise, we provide integrated end-to-end lifecycle AI enabled Industrial IoT solutions with connected products, automation,\r\nsoftware and services, delivering digital twins to enable profitable growth for our customers.\n\nWe are a people company with an ecosystem of 150,000 colleagues and more than a million partners operating in over 100 countries\r\nto ensure proximity to our customers and stakeholders. We embrace diversity and inclusion in everything we do, guided by our\r\nmeaningful purpose of a sustainable future for all. \n\n www.se.com",
        "title": "About Schneider Electric"
      },
      {
        "category": "summary",
        "text": "Schneider Electric is aware of multiple vulnerabilities disclosed in PostgreSQL.\r\n\nMany vendors, including Schneider Electric, use PostgreSQL in their offers. PostgreSQL is a \r\ndatabase server that is used as a data store for multiple products.\r\n\nSchneider Electric installs a version of PostgreSQL with its EcoStruxure\u2122 Power Operation https://www.se.com/us/en/product-range/65405-ecostruxure-power-operation/?parent-subcategory-id=59326966\u0026filter=business-4-low-voltage-products-and-systems#overview software. \r\n\nEcoStruxure\u2122 Power Operation (EPO) is an on-premises software offer that provides a single \r\nplatform to monitor and control medium and lower power systems.\r\n\nFailure to apply the remediations and mitigations below could result in loss of system \r\nfunctionality or unauthorized access to system functions.",
        "title": "Overview"
      },
      {
        "category": "other",
        "text": "Customers should use appropriate patching methodologies when applying these patches to their systems. We strongly recommend the use of back-ups and evaluating the impact of these patches in a Test and Development environment or on an offline infrastructure. Contact Schneider Electric\u2019s Customer Care Center if you need assistance removing a patch. "
      },
      {
        "category": "details",
        "text": "A number of transitive vulnerabilities in PostgreSQL pgadmin tool could impact EcoStruxure\u2122 Power Operation software. Please refer to the following CVEs: \n\u2022 CVE-2023-50447\n\u2022 CVE-2024-28219\n\u2022 CVE-2022-45198\n\u2022 CVE-2023-5217\n\u2022 CVE-2023-35945\n\u2022 CVE-2023-44487\n\n Additional information about these vulnerabilities can be found on https://www.cve.org/",
        "title": "Vulnerability Details"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "cpcert@se.com",
      "name": "Schneider Electric CPCERT",
      "namespace": "https://www.se.com/ww/en/work/support/cybersecurity/security-notifications.jsp"
    },
    "references": [
      {
        "category": "self",
        "summary": "EcoStruxure\u2122 Power Operation - SEVD-2025-189-03 PDF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2025-189-03\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=SEVD-2025-189-03.pdf"
      },
      {
        "category": "self",
        "summary": "EcoStruxure\u2122 Power Operation - SEVD-2025-189-03 CSAF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2025-189-03\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=sevd-2025-189-03.json"
      },
      {
        "category": "external",
        "summary": "Recommended Cybersecurity Best Practices",
        "url": "https://www.se.com/ww/en/download/document/7EN52-0390/"
      }
    ],
    "title": "EcoStruxure\u2122 Power Operation",
    "tracking": {
      "current_release_date": "2026-02-10T08:00:00.000Z",
      "generator": {
        "date": "2026-02-05T00:00:00.000Z",
        "engine": {
          "name": "Schneider Electric CSAF Generator",
          "version": "1.2"
        }
      },
      "id": "SEVD-2025-189-03",
      "initial_release_date": "2025-07-08T04:00:00.000Z",
      "revision_history": [
        {
          "date": "2025-07-08T04:00:00.000Z",
          "number": "1.0.0",
          "summary": "Original Release"
        },
        {
          "date": "2026-02-10T08:00:00.000Z",
          "number": "2.0.0",
          "summary": "Remediations are now available for EcoStruxure\u2122 Power Operation 2022. Vulnerability details and remediation directions have been updated as well."
        }
      ],
      "status": "final",
      "version": "2.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:generic/\u003c=2022 CU6",
                "product": {
                  "name": "EcoStruxure\u2122 Power Operation (EPO) 2022 CU6 and prior",
                  "product_id": "1"
                }
              },
              {
                "category": "product_version",
                "name": "2022 CU7",
                "product": {
                  "name": "EcoStruxure\u2122 Power Operation 2022 CU7",
                  "product_id": "4"
                }
              },
              {
                "category": "product_version_range",
                "name": "vers:generic/\u003c=2024 CU1",
                "product": {
                  "name": "EcoStruxure\u2122 Power Operation (EPO) 2024 CU1 and prior",
                  "product_id": "2"
                }
              },
              {
                "category": "product_version",
                "name": "2024 CU2",
                "product": {
                  "name": "EcoStruxure\u2122 Power Operation 2024 CU2",
                  "product_id": "3"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO)"
          }
        ],
        "category": "vendor",
        "name": "Schneider Electric"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-50447",
      "notes": [
        {
          "category": "description",
          "text": "Pillow through 10.1.0 allows PIL.ImageMath.eval Arbitrary Code Execution via the environment parameter, a different vulnerability than CVE-2022-22817 (which was about the expression parameter).",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "The CVE\u0027s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, not required by EcoStruxure\u2122 Power Operation 2024, we recommend you uninstall it from your EPO server and client machines. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. EcoStruxure\u2122 Power Operation 2024 CU2 includes an updated version of PostgreSQL and is available for download here: https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operation 2022 CU7 includes an updated version of PostgreSQL and is available for download here:https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, which is not required by EcoStruxure\u2122 Power Operation 2022, ensure you have updated it to the latest version.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2023-50447"
    },
    {
      "cve": "CVE-2024-28219",
      "notes": [
        {
          "category": "description",
          "text": "In _imagingcms.c in Pillow before 10.3.0, a buffer overflow exists because strcpy is used instead of strncpy.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, not required by EcoStruxure\u2122 Power Operation 2024, we recommend you uninstall it from your EPO server and client machines.We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. EcoStruxure\u2122 Power Operation 2024 CU2 includes an updated version of PostgreSQL and is available for download here: https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operation 2022 CU7 includes an updated version of PostgreSQL and is available for download here:https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, which is not required by EcoStruxure\u2122 Power Operation 2022, ensure you have updated it to the latest version.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2024-28219"
    },
    {
      "cve": "CVE-2022-45198",
      "notes": [
        {
          "category": "description",
          "text": "Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, not required by EcoStruxure\u2122 Power Operation 2024, we recommend you uninstall it from your EPO server and client machines.We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. EcoStruxure\u2122 Power Operation 2024 CU2 includes an updated version of PostgreSQL and is available for download here: https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operation 2022 CU7 includes an updated version of PostgreSQL and is available for download here:https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, which is not required by EcoStruxure\u2122 Power Operation 2022, ensure you have updated it to the latest version.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2022-45198"
    },
    {
      "cve": "CVE-2023-5217",
      "notes": [
        {
          "category": "description",
          "text": "Heap buffer overflow in vp8 encoding in libvpx in Google Chrome prior to 117.0.5938.132 and libvpx 1.13.1 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "The CVE\u0027s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, not required by EcoStruxure\u2122 Power Operation 2024, we recommend you uninstall it from your EPO server and client machines.We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. EcoStruxure\u2122 Power Operation 2024 CU2 includes an updated version of PostgreSQL and is available for download here: https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operation 2022 CU7 includes an updated version of PostgreSQL and is available for download here:https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, which is not required by EcoStruxure\u2122 Power Operation 2022, ensure you have updated it to the latest version.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2023-5217"
    },
    {
      "cve": "CVE-2023-35945",
      "notes": [
        {
          "category": "description",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u0027s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "The CVE\u0027s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, not required by EcoStruxure\u2122 Power Operation 2024, we recommend you uninstall it from your EPO server and client machines.We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. EcoStruxure\u2122 Power Operation 2024 CU2 includes an updated version of PostgreSQL and is available for download here: https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operation 2022 CU7 includes an updated version of PostgreSQL and is available for download here:https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, which is not required by EcoStruxure\u2122 Power Operation 2022, ensure you have updated it to the latest version.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-44487",
      "notes": [
        {
          "category": "description",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, not required by EcoStruxure\u2122 Power Operation 2024, we recommend you uninstall it from your EPO server and client machines.We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. EcoStruxure\u2122 Power Operation 2024 CU2 includes an updated version of PostgreSQL and is available for download here: https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2024-Release-amp-Updates-Install-Procedure/m-p/478928/thread-id/6997#M6997"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operation 2022 CU7 includes an updated version of PostgreSQL and is available for download here:https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322. We strongly recommend customers take the following actions:\u2022 If waveform analysis and ETAP simulation features are not used, uninstall PostgreSQLOR\u2022 For those customers using waveform analysis and ETAP simulation features, we recommend all deployments of EPO only accept connections from localhost in PostgresSQL. Contact customer care for information on how to modify PostgreSQL. Further, we recommend you manually uninstall PostgreSQL 14.10 and update to PostgreSQL 14.17 or higher. The CVE\u2019s listed above affect the PostgresSQL pgadmin tool. If you have installed this tool, which is not required by EcoStruxure\u2122 Power Operation 2022, ensure you have updated it to the latest version.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/491544#M7322"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.