CVE-2026-14367 (GCVE-0-2026-14367)
Vulnerability from cvelistv5 – Published: 2026-08-31 18:13 – Updated: 2026-09-01 14:05
VLAI
EPSS
VEX
Title
I3C IBI work-node free-list data race between ISR and workqueue thread
Summary
The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side.
Because sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.
The race is driven by I3C bus traffic — IBIs, hot-joins, and controller-role requests originate from target devices on the bus, and I3C supports hot-joining devices. An attacker controlling an I3C peripheral on the board's chip-to-chip bus can generate high-frequency interrupts timed to collide with the free operation. Exploitation requires physical access to the bus and winning a narrow timing window; the most realistic impact is a crash or hang (denial of service), with memory corruption possible but hard to control.
The fix wraps all free-list sys_slist_get()/sys_slist_append() operations in the new ibi_work_alloc()/ibi_work_free() helpers, each guarded by a k_spinlock (ibi_work_lock), closing the race across ISR and thread contexts.
Severity
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-09-01 14:04 UTC
CWE
- CWE-362 - race
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
3.2.0 , < 4.4.2
(semver)
|
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-14367",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-01T14:04:51.685369Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-01T14:05:04.912Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i3c/i3c_ibi_workq.c"
],
"programRoutines": [
{
"name": "i3c_ibi_work_enqueue"
},
{
"name": "i3c_ibi_work_enqueue_cb"
},
{
"name": "i3c_ibi_work_enqueue_controller_request"
},
{
"name": "i3c_ibi_work_enqueue_hotjoin"
},
{
"name": "i3c_ibi_work_enqueue_target_irq"
},
{
"name": "i3c_ibi_work_handler"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.4.2",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side.\n\nBecause sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.\n\nThe race is driven by I3C bus traffic \u2014 IBIs, hot-joins, and controller-role requests originate from target devices on the bus, and I3C supports hot-joining devices. An attacker controlling an I3C peripheral on the board\u0027s chip-to-chip bus can generate high-frequency interrupts timed to collide with the free operation. Exploitation requires physical access to the bus and winning a narrow timing window; the most realistic impact is a crash or hang (denial of service), with memory corruption possible but hard to control.\n\nThe fix wraps all free-list sys_slist_get()/sys_slist_append() operations in the new ibi_work_alloc()/ibi_work_free() helpers, each guarded by a k_spinlock (ibi_work_lock), closing the race across ISR and thread contexts."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 3.1,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:L",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-362",
"description": "race",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-31T18:13:15.626Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/e87e7e2ac7c5ded0af3fb5934518cc5688e458cc"
},
{
"name": "GHSA-gfj5-gcxv-9jqm",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-gfj5-gcxv-9jqm"
}
],
"title": "I3C IBI work-node free-list data race between ISR and workqueue thread",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-14367",
"datePublished": "2026-08-31T18:13:15.626Z",
"dateReserved": "2026-07-01T19:30:20.135Z",
"dateUpdated": "2026-09-01T14:05:04.912Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-14367",
"date": "2026-09-24",
"epss": "0.00103",
"percentile": "0.00909"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i3c/i3c_ibi_workq.c"
],
"programRoutines": [
{
"name": "i3c_ibi_work_enqueue"
},
{
"name": "i3c_ibi_work_enqueue_cb"
},
{
"name": "i3c_ibi_work_enqueue_controller_request"
},
{
"name": "i3c_ibi_work_enqueue_hotjoin"
},
{
"name": "i3c_ibi_work_enqueue_target_irq"
},
{
"name": "i3c_ibi_work_handler"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.4.2",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side.\n\nBecause sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.\n\nThe race is driven by I3C bus traffic \u2014 IBIs, hot-joins, and controller-role requests originate from target devices on the bus, and I3C supports hot-joining devices. An attacker controlling an I3C peripheral on the board\u0027s chip-to-chip bus can generate high-frequency interrupts timed to collide with the free operation. Exploitation requires physical access to the bus and winning a narrow timing window; the most realistic impact is a crash or hang (denial of service), with memory corruption possible but hard to control.\n\nThe fix wraps all free-list sys_slist_get()/sys_slist_append() operations in the new ibi_work_alloc()/ibi_work_free() helpers, each guarded by a k_spinlock (ibi_work_lock), closing the race across ISR and thread contexts."
}
],
"id": "CVE-2026-14367",
"lastModified": "2026-09-01T15:17:11.467",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "PHYSICAL",
"availabilityImpact": "LOW",
"baseScore": 3.1,
"baseSeverity": "LOW",
"confidentialityImpact": "NONE",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:L",
"version": "3.1"
},
"exploitabilityScore": 0.5,
"impactScore": 2.5,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-14367",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-01T14:04:51.685369Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-08-31T19:16:45.750",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/e87e7e2ac7c5ded0af3fb5934518cc5688e458cc"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-gfj5-gcxv-9jqm"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-362"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-14367",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-01T14:04:51.685369Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-01T14:04:59.629Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i3c/i3c_ibi_workq.c"
],
"programRoutines": [
{
"name": "i3c_ibi_work_enqueue"
},
{
"name": "i3c_ibi_work_enqueue_cb"
},
{
"name": "i3c_ibi_work_enqueue_controller_request"
},
{
"name": "i3c_ibi_work_enqueue_hotjoin"
},
{
"name": "i3c_ibi_work_enqueue_target_irq"
},
{
"name": "i3c_ibi_work_handler"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.4.2",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side.\n\nBecause sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.\n\nThe race is driven by I3C bus traffic \u2014 IBIs, hot-joins, and controller-role requests originate from target devices on the bus, and I3C supports hot-joining devices. An attacker controlling an I3C peripheral on the board\u0027s chip-to-chip bus can generate high-frequency interrupts timed to collide with the free operation. Exploitation requires physical access to the bus and winning a narrow timing window; the most realistic impact is a crash or hang (denial of service), with memory corruption possible but hard to control.\n\nThe fix wraps all free-list sys_slist_get()/sys_slist_append() operations in the new ibi_work_alloc()/ibi_work_free() helpers, each guarded by a k_spinlock (ibi_work_lock), closing the race across ISR and thread contexts."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 3.1,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:L",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-362",
"description": "race",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-31T18:13:15.626Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/e87e7e2ac7c5ded0af3fb5934518cc5688e458cc"
},
{
"name": "GHSA-gfj5-gcxv-9jqm",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-gfj5-gcxv-9jqm"
}
],
"title": "I3C IBI work-node free-list data race between ISR and workqueue thread",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-14367",
"datePublished": "2026-08-31T18:13:15.626Z",
"dateReserved": "2026-07-01T19:30:20.135Z",
"dateUpdated": "2026-09-01T14:05:04.912Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…