GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

CVE-2024-22811 (GCVE-0-2024-22811)

Vulnerability from cvelistv5 – Published: 2024-04-22 00:00 – Updated: 2025-03-13 15:22
VLAI
Summary
An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the communication between the PathPilot controller and the CNC router via overwriting the Hostmot2 configuration cookie in the device memory.
Severity
8.2 (High)
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-04-23 14:55 UTC
CWE
  • n/a
  • CWE-284 - Improper Access Control
Assigner
References
Impacted products
Vendor Product Version CPE status
tormach pilotpath_controller Affected: 2.9.6
    cpe:2.3:a:tormach:pilotpath_controller:2.9.6:*:*:*:*:*:*:*
Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "affected": [
          {
            "cpes": [
              "cpe:2.3:a:tormach:pilotpath_controller:2.9.6:*:*:*:*:*:*:*"
            ],
            "defaultStatus": "unknown",
            "product": "pilotpath_controller",
            "vendor": "tormach",
            "versions": [
              {
                "status": "affected",
                "version": "2.9.6"
              }
            ]
          }
        ],
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "NETWORK",
              "availabilityImpact": "HIGH",
              "baseScore": 8.2,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "LOW",
              "integrityImpact": "NONE",
              "privilegesRequired": "NONE",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2024-22811",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2024-04-23T14:55:41.068984Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "problemTypes": [
          {
            "descriptions": [
              {
                "cweId": "CWE-284",
                "description": "CWE-284 Improper Access Control",
                "lang": "en",
                "type": "CWE"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2025-03-13T15:22:22.364Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      },
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-01T22:51:11.245Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "n/a",
          "vendor": "n/a",
          "versions": [
            {
              "status": "affected",
              "version": "n/a"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the communication between the PathPilot controller and the CNC router via overwriting the Hostmot2 configuration cookie in the device memory."
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "description": "n/a",
              "lang": "en",
              "type": "text"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2024-04-22T11:51:12.647Z",
        "orgId": "8254265b-2729-46b6-b9e3-3dfca2d5bfca",
        "shortName": "mitre"
      },
      "references": [
        {
          "url": "https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9"
        }
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8254265b-2729-46b6-b9e3-3dfca2d5bfca",
    "assignerShortName": "mitre",
    "cveId": "CVE-2024-22811",
    "datePublished": "2024-04-22T00:00:00.000Z",
    "dateReserved": "2024-01-11T00:00:00.000Z",
    "dateUpdated": "2025-03-13T15:22:22.364Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2024-22811",
      "date": "2026-09-16",
      "epss": "0.00441",
      "percentile": "0.37535"
    },
    "fkie_nvd": {
      "descriptions": "[{\"lang\": \"en\", \"value\": \"An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the communication between the PathPilot controller and the CNC router via overwriting the Hostmot2 configuration cookie in the device memory.\"}, {\"lang\": \"es\", \"value\": \"Un problema en Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 permite a los atacantes provocar una denegaci\\u00f3n de servicio (DoS) al interrumpir la comunicaci\\u00f3n entre el controlador PathPilot y el enrutador CNC sobrescribiendo la cookie de configuraci\\u00f3n Hostmot2 en la memoria del dispositivo.\"}]",
      "id": "CVE-2024-22811",
      "lastModified": "2024-11-21T08:56:40.090",
      "metrics": "{\"cvssMetricV31\": [{\"source\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"type\": \"Secondary\", \"cvssData\": {\"version\": \"3.1\", \"vectorString\": \"CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H\", \"baseScore\": 8.2, \"baseSeverity\": \"HIGH\", \"attackVector\": \"NETWORK\", \"attackComplexity\": \"LOW\", \"privilegesRequired\": \"NONE\", \"userInteraction\": \"NONE\", \"scope\": \"UNCHANGED\", \"confidentialityImpact\": \"LOW\", \"integrityImpact\": \"NONE\", \"availabilityImpact\": \"HIGH\"}, \"exploitabilityScore\": 3.9, \"impactScore\": 4.2}]}",
      "published": "2024-04-22T12:15:07.427",
      "references": "[{\"url\": \"https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9\", \"source\": \"cve@mitre.org\"}, {\"url\": \"https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9\", \"source\": \"af854a3a-2127-422b-91ae-364da2661108\"}]",
      "sourceIdentifier": "cve@mitre.org",
      "vulnStatus": "Awaiting Analysis"
    },
    "nvd": "{\"cve\":{\"id\":\"CVE-2024-22811\",\"sourceIdentifier\":\"cve@mitre.org\",\"published\":\"2024-04-22T12:15:07.427\",\"lastModified\":\"2026-06-17T07:11:46.243\",\"vulnStatus\":\"Analyzed\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the communication between the PathPilot controller and the CNC router via overwriting the Hostmot2 configuration cookie in the device memory.\"},{\"lang\":\"es\",\"value\":\"Un problema en Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 permite a los atacantes provocar una denegaci\u00f3n de servicio (DoS) al interrumpir la comunicaci\u00f3n entre el controlador PathPilot y el enrutador CNC sobrescribiendo la cookie de configuraci\u00f3n Hostmot2 en la memoria del dispositivo.\"}],\"affected\":[{\"source\":\"cve@mitre.org\",\"affectedData\":[{\"vendor\":\"n/a\",\"product\":\"n/a\",\"versions\":[{\"version\":\"n/a\",\"status\":\"affected\"}]}]},{\"source\":\"134c704f-9b21-4f2e-91b3-4a467353bcc0\",\"affectedData\":[{\"vendor\":\"tormach\",\"product\":\"pilotpath_controller\",\"defaultStatus\":\"unknown\",\"cpes\":[\"cpe:2.3:a:tormach:pilotpath_controller:2.9.6:*:*:*:*:*:*:*\"],\"versions\":[{\"version\":\"2.9.6\",\"status\":\"affected\"}]}]}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"134c704f-9b21-4f2e-91b3-4a467353bcc0\",\"type\":\"Secondary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H\",\"baseScore\":8.2,\"baseSeverity\":\"HIGH\",\"attackVector\":\"NETWORK\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"NONE\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"LOW\",\"integrityImpact\":\"NONE\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":3.9,\"impactScore\":4.2}],\"ssvcV203\":[{\"source\":\"134c704f-9b21-4f2e-91b3-4a467353bcc0\",\"ssvcData\":{\"timestamp\":\"2024-04-23T14:55:41.068984Z\",\"id\":\"CVE-2024-22811\",\"options\":[{\"exploitation\":\"none\"},{\"automatable\":\"yes\"},{\"technicalImpact\":\"partial\"}],\"role\":\"CISA Coordinator\",\"version\":\"2.0.3\"}}]},\"weaknesses\":[{\"source\":\"134c704f-9b21-4f2e-91b3-4a467353bcc0\",\"type\":\"Secondary\",\"description\":[{\"lang\":\"en\",\"value\":\"CWE-284\"}]}],\"configurations\":[{\"operator\":\"AND\",\"nodes\":[{\"operator\":\"OR\",\"negate\":false,\"cpeMatch\":[{\"vulnerable\":true,\"criteria\":\"cpe:2.3:a:tormach:pathpilot_controller:2.9.6:*:*:*:*:*:*:*\",\"matchCriteriaId\":\"F3216698-6C50-40B5-96E5-93A2BE9EB786\"}]},{\"operator\":\"OR\",\"negate\":false,\"cpeMatch\":[{\"vulnerable\":false,\"criteria\":\"cpe:2.3:h:tormach:xstech_cnc_router:-:*:*:*:*:*:*:*\",\"matchCriteriaId\":\"48368BD0-CCCB-4A1B-8D9A-965AF6E9935E\"}]}]}],\"references\":[{\"url\":\"https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9\",\"source\":\"cve@mitre.org\",\"tags\":[\"Third Party Advisory\"]},{\"url\":\"https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9\",\"source\":\"af854a3a-2127-422b-91ae-364da2661108\",\"tags\":[\"Third Party Advisory\"]}]}}",
    "redhat_vex": {
      "current_release_date": "2025-05-28T19:03:27+00:00",
      "cve": "CVE-2024-22811",
      "id": "CVE-2024-22811",
      "initial_release_date": "2024-01-01T00:00:00+00:00",
      "product_status:known_not_affected": "1",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "CVE-2024-22811",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2024/cve-2024-22811.json",
      "version": "3"
    },
    "vulnrichment": {
      "containers": "{\"adp\": [{\"title\": \"CVE Program Container\", \"references\": [{\"url\": \"https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9\", \"tags\": [\"x_transferred\"]}], \"providerMetadata\": {\"orgId\": \"af854a3a-2127-422b-91ae-364da2661108\", \"shortName\": \"CVE\", \"dateUpdated\": \"2024-08-01T22:51:11.245Z\"}}, {\"title\": \"CISA ADP Vulnrichment\", \"metrics\": [{\"cvssV3_1\": {\"scope\": \"UNCHANGED\", \"version\": \"3.1\", \"baseScore\": 8.2, \"attackVector\": \"NETWORK\", \"baseSeverity\": \"HIGH\", \"vectorString\": \"CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H\", \"integrityImpact\": \"NONE\", \"userInteraction\": \"NONE\", \"attackComplexity\": \"LOW\", \"availabilityImpact\": \"HIGH\", \"privilegesRequired\": \"NONE\", \"confidentialityImpact\": \"LOW\"}}, {\"other\": {\"type\": \"ssvc\", \"content\": {\"id\": \"CVE-2024-22811\", \"role\": \"CISA Coordinator\", \"options\": [{\"Exploitation\": \"none\"}, {\"Automatable\": \"yes\"}, {\"Technical Impact\": \"partial\"}], \"version\": \"2.0.3\", \"timestamp\": \"2024-04-23T14:55:41.068984Z\"}}}], \"affected\": [{\"cpes\": [\"cpe:2.3:a:tormach:pilotpath_controller:2.9.6:*:*:*:*:*:*:*\"], \"vendor\": \"tormach\", \"product\": \"pilotpath_controller\", \"versions\": [{\"status\": \"affected\", \"version\": \"2.9.6\"}], \"defaultStatus\": \"unknown\"}], \"problemTypes\": [{\"descriptions\": [{\"lang\": \"en\", \"type\": \"CWE\", \"cweId\": \"CWE-284\", \"description\": \"CWE-284 Improper Access Control\"}]}], \"providerMetadata\": {\"orgId\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"shortName\": \"CISA-ADP\", \"dateUpdated\": \"2024-04-22T16:24:15.618Z\"}}], \"cna\": {\"affected\": [{\"vendor\": \"n/a\", \"product\": \"n/a\", \"versions\": [{\"status\": \"affected\", \"version\": \"n/a\"}]}], \"references\": [{\"url\": \"https://gist.github.com/VcuCyber/51075894d1728db07fc2df286c003df9\"}], \"descriptions\": [{\"lang\": \"en\", \"value\": \"An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to cause a Denial of Service (DoS) by disrupting the communication between the PathPilot controller and the CNC router via overwriting the Hostmot2 configuration cookie in the device memory.\"}], \"problemTypes\": [{\"descriptions\": [{\"lang\": \"en\", \"type\": \"text\", \"description\": \"n/a\"}]}], \"providerMetadata\": {\"orgId\": \"8254265b-2729-46b6-b9e3-3dfca2d5bfca\", \"shortName\": \"mitre\", \"dateUpdated\": \"2024-04-22T11:51:12.647Z\"}}}",
      "cveMetadata": "{\"cveId\": \"CVE-2024-22811\", \"state\": \"PUBLISHED\", \"dateUpdated\": \"2025-03-13T15:22:22.364Z\", \"dateReserved\": \"2024-01-11T00:00:00.000Z\", \"assignerOrgId\": \"8254265b-2729-46b6-b9e3-3dfca2d5bfca\", \"datePublished\": \"2024-04-22T00:00:00.000Z\", \"assignerShortName\": \"mitre\"}",
      "dataType": "CVE_RECORD",
      "dataVersion": "5.1"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.


Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.