cisco-sa-xrsig-uy4zrucg
Vulnerability from csaf_cisco
Published
2025-09-10 16:00
Modified
2025-09-10 16:00
Summary
Cisco IOS XR Software Image Verification Bypass Vulnerability
Notes
Summary
A vulnerability in the installation process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR Software image signature verification and load unsigned software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to incomplete validation of files during the installation of an .iso file. An attacker could exploit this vulnerability by modifying contents of the .iso image and then installing and activating it on the device. A successful exploit could allow the attacker to load an unsigned file as part of the image activation process.
Note: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is part of the September 2025 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2025 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75549"].
Vulnerable Products
This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco IOS XR Software, regardless of device configuration:
ASR 9000 Series Aggregation Services Routers (64-bit)
IOS XR White box (IOSXRWBD)
IOS XRv 9000 Routers
Network Convergence System (NCS) 540 Series Routers that are running an NCS 540-iosxr base image
NCS 560 Series Routers
NCS 1000 Series (NCS 1001, NCS 1002, and NCS 1004)
NCS 5000 Series Routers
NCS 5500 Series Routers
NCS 5700 Series Line Cards and Routers that are running an NCS 5500 base image
NCS 6000 Series Routers
For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
IOS Software
IOS XE Software
NX-OS Software
This vulnerability also does not affect Cisco IOS XR Software if it is running on the following Cisco devices:
8000 Series Routers
NCS 540 Series Routers that are running an NCS 540L-iosxr base image
NCS 1010 Platforms
NCS 1014 Platforms
NCS 5700 Series devices that are running an NCS 5700 base image
Details
To exploit this vulnerability, an attacker with root-system privileges on an affected device must install a modified .iso image and then activate the source. The fix to this vulnerability introduces additional checks of files in the .iso image to prevent unsigned files from being installed.
Customers should monitor their devices for unexpected downgrades from a fixed release because the fix is not applicable to older versions.
Cisco recommends validating software image integrity by comparing the MD5 or SHA512 checksum that is calculated for the image on the device to which it is destined to be installed with the corresponding MD5 or SHA512 checksum of that image listed on Cisco.com.
In the following example, which shows the steps that should be followed to validate software image integrity, a genuine Cisco IOS XR Software Release 7.10.2 .iso file is compared with one that is invalid.
1. On the Cisco Software Download ["https://software.cisco.com/download/home/282414851/type/280805694/release/7.10.2"] page, check the MD5 and SHA512 checksum values for the Cisco IOS XR Software Release 7.10.2 .iso file. These values are as follows:
MD5 checksum: 1c79e3ece14e4cd873f02cd70693af85
SHA512 checksum: 0d6c6f4469f0034072b819f7e576639f46dfd033b3920574c767fc39fa14ea850928c8ecf2ae4bb233b57e46cd5580b14fa5bdb0c046a8b3bb2508089e3cc610
2. Validate the checksum that will be installed from the hard disk with the expected checksum from Cisco.com, as shown in the following examples:
A SHA512 checksum of asr9k-mini-x64-7.10.2.iso, which will be installed from the hard disk, matches the expected checksum from Cisco.com:
RP/0/RSP0/CPU0:Router#run sha512sum /harddisk:/asr9k-mini-x64-7.10.2.iso
Wed Sep 10 16:00:00.000 UTC
0d6c6f4469f0034072b819f7e576639f46dfd033b3920574c767fc39fa14ea850928c8ecf2ae4bb233b57e46cd5580b14fa5bdb0c046a8b3bb2508089e3cc610 /harddisk:/asr9k-mini-x64-7.10.2.iso
RP/0/RSP0/CPU0:Router#
The MD5 checksum of asr9k-mini-x64-7.10.2.iso does not match the expected checksum from Cisco.com:
RP/0/RSP0/CPU0:Router#show md5 file /harddisk:/asr9k-mini-x64-7.10.2.iso
Wed Sep 10 16:00:00.000 UTC
4acce5bb525cc47da0adb5fcb330e0f5 /harddisk:/asr9k-mini-x64-7.10.2.iso
RP/0/RSP0/CPU0:Router#
If the checksums do not match, do not install the image.
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
Cisco has released free software updates ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.
Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
The Cisco Support and Downloads page ["https://www.cisco.com/c/en/us/support/index.html"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
In the following table, the left column lists Cisco software releases or trains. The right column indicates whether a release (train) is affected by the vulnerability that is described in this advisory and the first release that includes the fix for this vulnerability.
Cisco IOS XR Software Release First Fixed Release 7.10 and earlier Migrate to a fixed release. 7.11 Migrate to a fixed release. 24.2 24.2.21 24.3 Migrate to a fixed release. 24.4 24.4.2 25.1 Not affected.
No SMUs have been created for this vulnerability. Although an SMU is feasible, any attacker who is able to install and activate a modified .iso image could also be in a position to remove the SMU prior to exploitation.
The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
Cisco would like to thank the external researcher who reported this vulnerability.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "Cisco would like to thank the external researcher who reported this vulnerability." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the installation process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR Software image signature verification and load unsigned software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.\r\n\r\nThis vulnerability is due to incomplete validation of files during the installation of an .iso file. An attacker could exploit this vulnerability by modifying contents of the .iso image and then installing and activating it on the device. A successful exploit could allow the attacker to load an unsigned file as part of the image activation process.\r\n\r\nNote: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\n\r\n\r\nThis advisory is part of the September 2025 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2025 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75549\"].", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco IOS XR Software, regardless of device configuration:\r\n\r\nASR 9000 Series Aggregation Services Routers (64-bit)\r\nIOS XR White box (IOSXRWBD)\r\nIOS XRv 9000 Routers\r\nNetwork Convergence System (NCS) 540 Series Routers that are running an NCS 540-iosxr base image\r\nNCS 560 Series Routers\r\nNCS 1000 Series (NCS 1001, NCS 1002, and NCS 1004)\r\nNCS 5000 Series Routers\r\nNCS 5500 Series Routers\r\nNCS 5700 Series Line Cards and Routers that are running an NCS 5500 base image\r\nNCS 6000 Series Routers\r\n\r\nFor information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco products:\r\n\r\nIOS Software\r\nIOS XE Software\r\nNX-OS Software\r\n\r\nThis vulnerability also does not affect Cisco IOS XR Software if it is running on the following Cisco devices:\r\n\r\n8000 Series Routers\r\nNCS 540 Series Routers that are running an NCS 540L-iosxr base image\r\nNCS 1010 Platforms\r\nNCS 1014 Platforms\r\nNCS 5700 Series devices that are running an NCS 5700 base image", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "To exploit this vulnerability, an attacker with root-system privileges on an affected device must install a modified .iso image and then activate the source. The fix to this vulnerability introduces additional checks of files in the .iso image to prevent unsigned files from being installed.\r\n\r\nCustomers should monitor their devices for unexpected downgrades from a fixed release because the fix is not applicable to older versions.\r\n\r\nCisco recommends validating software image integrity by comparing the MD5 or SHA512 checksum that is calculated for the image on the device to which it is destined to be installed with the corresponding MD5 or SHA512 checksum of that image listed on Cisco.com.\r\n\r\nIn the following example, which shows the steps that should be followed to validate software image integrity, a genuine Cisco IOS XR Software Release 7.10.2 .iso file is compared with one that is invalid.\r\n\r\n1. On the Cisco Software Download [\"https://software.cisco.com/download/home/282414851/type/280805694/release/7.10.2\"] page, check the MD5 and SHA512 checksum values for the Cisco IOS XR Software Release 7.10.2 .iso file. These values are as follows:\r\n\r\nMD5 checksum: 1c79e3ece14e4cd873f02cd70693af85\r\nSHA512 checksum: 0d6c6f4469f0034072b819f7e576639f46dfd033b3920574c767fc39fa14ea850928c8ecf2ae4bb233b57e46cd5580b14fa5bdb0c046a8b3bb2508089e3cc610\r\n\r\n2. Validate the checksum that will be installed from the hard disk with the expected checksum from Cisco.com, as shown in the following examples:\r\n\r\nA SHA512 checksum of asr9k-mini-x64-7.10.2.iso, which will be installed from the hard disk, matches the expected checksum from Cisco.com:\r\n\r\n\r\nRP/0/RSP0/CPU0:Router#run sha512sum /harddisk:/asr9k-mini-x64-7.10.2.iso\r\nWed Sep 10 16:00:00.000 UTC\r\n0d6c6f4469f0034072b819f7e576639f46dfd033b3920574c767fc39fa14ea850928c8ecf2ae4bb233b57e46cd5580b14fa5bdb0c046a8b3bb2508089e3cc610 /harddisk:/asr9k-mini-x64-7.10.2.iso\r\nRP/0/RSP0/CPU0:Router#\r\n\r\nThe MD5 checksum of asr9k-mini-x64-7.10.2.iso does not match the expected checksum from Cisco.com:\r\n\r\n\r\nRP/0/RSP0/CPU0:Router#show md5 file /harddisk:/asr9k-mini-x64-7.10.2.iso\r\nWed Sep 10 16:00:00.000 UTC\r\n4acce5bb525cc47da0adb5fcb330e0f5 /harddisk:/asr9k-mini-x64-7.10.2.iso\r\nRP/0/RSP0/CPU0:Router#\r\n\r\nIf the checksums do not match, do not install the image.", "title": "Details" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu\"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.\r\n\r\nCustomers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nThe Cisco Support and Downloads page [\"https://www.cisco.com/c/en/us/support/index.html\"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n Fixed Releases\r\nIn the following table, the left column lists Cisco software releases or trains. The right column indicates whether a release (train) is affected by the vulnerability that is described in this advisory and the first release that includes the fix for this vulnerability.\r\n Cisco IOS XR Software Release First Fixed Release 7.10 and earlier Migrate to a fixed release. 7.11 Migrate to a fixed release. 24.2 24.2.21 24.3 Migrate to a fixed release. 24.4 24.4.2 25.1 Not affected.\r\nNo SMUs have been created for this vulnerability. Although an SMU is feasible, any attacker who is able to install and activate a modified .iso image could also be in a position to remove the SMU prior to exploitation.\r\n\r\nThe Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "Cisco would like to thank the external researcher who reported this vulnerability.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "psirt@cisco.com", "issuing_authority": "Cisco PSIRT", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco IOS XR Software Image Verification Bypass Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-xrsig-UY4zRUCG" }, { "category": "external", "summary": "Cisco Event Response: September 2025 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75549" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "Cisco Software Download", "url": "https://software.cisco.com/download/home/282414851/type/280805694/release/7.10.2" }, { "category": "external", "summary": "free software updates", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "Cisco Support and Downloads page", "url": "https://www.cisco.com/c/en/us/support/index.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco Security Advisories page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html" } ], "title": "Cisco IOS XR Software Image Verification Bypass Vulnerability", "tracking": { "current_release_date": "2025-09-10T16:00:00+00:00", "generator": { "date": "2025-09-10T15:54:44+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-xrsig-UY4zRUCG", "initial_release_date": "2025-09-10T16:00:00+00:00", "revision_history": [ { "date": "2025-09-10T15:54:38+00:00", "number": "1.0.0", "summary": "Initial public release." } ], "status": "final", "version": "1.0.0" } }, "product_tree": { "branches": [ { "branches": [ { "category": "product_family", "name": "Cisco IOS XR Software", "product": { "name": "Cisco IOS XR Software ", "product_id": "CSAFPID-5834" } } ], "category": "vendor", "name": "Cisco" } ] }, "vulnerabilities": [ { "cve": "CVE-2025-20248", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCwm03455" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-5834" ] }, "release_date": "2025-09-10T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-5834" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 6.0, "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N", "version": "3.1" }, "products": [ "CSAFPID-5834" ] } ], "title": "Cisco IOS XR Software Image Verification Bypass Vulnerability" } ] }
Loading…
Loading…
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.
Loading…