{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SINEC NMS before V2.0 SP1 is affected by multiple vulnerabilities.\n\nSiemens has released an update for SINEC NMS and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-943925.json"
      },
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-943925.html"
      },
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-943925.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-943925.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-046-15 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-046-15.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-046-15 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-046-15"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SINEC NMS",
    "tracking": {
      "current_release_date": "2024-02-13T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1"
        }
      },
      "id": "ICSA-24-046-15",
      "initial_release_date": "2024-02-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.0_SP1",
                "product": {
                  "name": "SINEC NMS",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEC NMS"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-4203",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which could lead to a denial of service attack. In theory it could also result in the disclosure of private memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4203"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0216",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL does not call this function however third party applications might call these functions on untrusted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0216"
    },
    {
      "cve": "CVE-2023-0217",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash. This function can be called on public keys supplied from untrusted sources which could allow an attacker to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but applications might call the function if there are additional security requirements imposed by standards such as FIPS 140-3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0217"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0401",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the digest initialization will fail. There is a missing check for the return value from the initialization function which later leads to invalid usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider. PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS implementation in OpenSSL does not call these functions however third party applications would be affected if they call these functions to verify signatures on untrusted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0401"
    },
    {
      "cve": "CVE-2023-1255",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The AES-XTS cipher decryption implementation for 64 bit ARM\nplatform contains a bug that could cause it to read past the input buffer,\nleading to a crash.\n\nImpact summary: Applications that use the AES-XTS algorithm on the 64 bit ARM\nplatform can crash in rare circumstances. The AES-XTS algorithm is usually\nused for disk encryption.\n\nThe AES-XTS cipher decryption implementation for 64 bit ARM platform will read\npast the end of the ciphertext buffer if the ciphertext size is 4 mod 5 in 16\nbyte blocks, e.g. 144 bytes or 1024 bytes. If the memory after the ciphertext\nbuffer is unmapped, this will trigger a crash which results in a denial of\nservice.\n\nIf an attacker can control the size and location of the ciphertext buffer\nbeing decrypted by an application using AES-XTS on 64 bit ARM, the\napplication is affected. This is fairly unlikely making this issue\na Low severity one.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1255"
    },
    {
      "cve": "CVE-2023-2454",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "schema_element defeats protective search_path changes; It was found that certain database calls in PostgreSQL could permit an authed attacker with elevated database-level privileges to execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2454"
    },
    {
      "cve": "CVE-2023-2455",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Row security policies disregard user ID changes after inlining; PostgreSQL could permit incorrect policies to be applied in certain cases where role-specific policies are used and a given query is planned under one role and then executed under other roles. This scenario can happen under security definer functions or when a common user and query is planned initially and then re-used across multiple SET ROLEs. Applying an incorrect policy may permit a user to complete otherwise-forbidden reads and modifications. This affects only databases that have used CREATE POLICY to define a row security policy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2455"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2975",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2975"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-25690",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Some mod_proxy configurations on Apache HTTP Server versions 2.4.0 through 2.4.55 allow a HTTP Request Smuggling attack.\r\n\r\nConfigurations are affected when mod_proxy is enabled along with some form of RewriteRule  or ProxyPassMatch in which a non-specific pattern matches  some portion of the user-supplied request-target (URL) data and is then re-inserted into the proxied request-target using variable substitution. \r\n\r\nRequest splitting/smuggling could result in bypass of access controls in the proxy server, proxying unintended URLs to existing origin servers, and cache poisoning. Users are recommended to update to at least version 2.4.56 of Apache HTTP Server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-25690"
    },
    {
      "cve": "CVE-2023-27522",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "HTTP Response Smuggling vulnerability in Apache HTTP Server via mod_proxy_uwsgi. This issue affects Apache HTTP Server: from 2.4.30 through 2.4.55.\n\nSpecial characters in the origin response header can truncate/split the response forwarded to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27522"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28319",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use after free vulnerability exists in curl \u003cv8.1.0 in the way libcurl offers a feature to verify an SSH server\u0027s public key using a SHA 256 hash. When this check fails, libcurl would free the memory for the fingerprint before it returns an error message containing the (now freed) hash. This flaw risks inserting sensitive heap-based data into the error message that might be shown to users or otherwise get leaked and revealed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28319"
    },
    {
      "cve": "CVE-2023-28320",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A denial of service vulnerability exists in curl \u003cv8.1.0 in the way libcurl provides several different backends for resolving host names, selected at build time. If it is built to use the synchronous resolver, it allows name resolves to time-out slow operations using `alarm()` and `siglongjmp()`. When doing this, libcurl used a global buffer that was not mutex protected and a multi-threaded application might therefore crash or otherwise misbehave.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28320"
    },
    {
      "cve": "CVE-2023-28321",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper certificate validation vulnerability exists in curl \u003cv8.1.0 in the way it supports matching of wildcard patterns when listed as \"Subject Alternative Name\" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (International Domain Name) hosts incorrectly and could as a result accept patterns that otherwise should mismatch. IDN hostnames are converted to puny code before used for certificate checks. Puny coded names always start with `xn--` and should not be allowed to pattern match, but the wildcard check in curl could still check for `x*`, which would match even though the IDN name most likely contained nothing even resembling an `x`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28321"
    },
    {
      "cve": "CVE-2023-28322",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl \u003cv8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28322"
    },
    {
      "cve": "CVE-2023-28709",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for CVE-2023-24998 was incomplete for Apache Tomcat 11.0.0-M2 to 11.0.0-M4, 10.1.5 to 10.1.7, 9.0.71 to 9.0.73 and 8.5.85 to 8.5.87. If non-default HTTP       connector settings were used such that the maxParameterCount\u00a0could be reached using query string parameters and a request was       submitted that supplied exactly maxParameterCount parameters\u00a0in the query string, the limit for uploaded request parts could be\u00a0bypassed with the potential for a denial of service to occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28709"
    },
    {
      "cve": "CVE-2023-30581",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of __proto__ in process.mainModule.__proto__.require() can bypass the policy mechanism and require modules outside of the policy.json definition. This vulnerability affects all users using the experimental policy mechanism in all active release lines: v16, v18 and, v20.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30581"
    },
    {
      "cve": "CVE-2023-30582",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in Node.js, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument. This flaw arises from an inadequate permission model that fails to restrict file watching through the fs.watchFile API. As a result, malicious actors can monitor files that they do not have explicit read access to.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30582"
    },
    {
      "cve": "CVE-2023-30583",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "fs.openAsBlob() can bypass the experimental permission model when using the file system read restriction with the --allow-fs-read flag in Node.js. This vulnerability arises from a missing check in the fs.openAsBlob() API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30583"
    },
    {
      "cve": "CVE-2023-30584",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in the experimental permission model of Node.js leads to improper handling of path traversal bypass when verifying file permissions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30584"
    },
    {
      "cve": "CVE-2023-30585",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been identified in the Node.js (.msi version) installation process, specifically affecting Windows users who install Node.js using the .msi installer. This vulnerability emerges during the repair operation, where the \"msiexec.exe\" process, running under the NT AUTHORITY\\SYSTEM context, attempts to read the %USERPROFILE% environment variable from the current user\u0027s registry.\n\nThe issue arises when the path referenced by the %USERPROFILE% environment variable does not exist. In such cases, the \"msiexec.exe\" process attempts to create the specified path in an unsafe manner, potentially leading to the creation of arbitrary folders in arbitrary locations.\n\nThe severity of this vulnerability is heightened by the fact that the %USERPROFILE% environment variable in the Windows registry can be modified by standard (or \"non-privileged\") users. Consequently, unprivileged actors, including malicious entities or trojans, can manipulate the environment variable key to deceive the privileged \"msiexec.exe\" process. This manipulation can result in the creation of folders in unintended and potentially malicious locations.\n\nIt is important to note that this vulnerability is specific to Windows users who install Node.js using the .msi installer. Users who opt for other installation methods are not affected by this particular issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30585"
    },
    {
      "cve": "CVE-2023-30586",
      "cwe": {
        "id": "CWE-862",
        "name": "Missing Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A privilege escalation vulnerability exists in Node.js 20 that allowed loading arbitrary OpenSSL engines when the experimental permission model is enabled, which can bypass and/or disable the permission model. The attack complexity is high. However, the crypto.setEngine() API can be used to bypass the permission model when called with a compatible OpenSSL engine. The OpenSSL engine can, for example, disable the permission model in the host process by manipulating the process\u0027s stack memory to locate the permission model Permission::enabled_ in the host process\u0027s heap memory. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30586"
    },
    {
      "cve": "CVE-2023-30587",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in Node.js allows for bypassing restrictions set by the --experimental-permission flag using the built-in inspector module (node:inspector). By exploiting the Worker class\u0027s ability to create an \"internal worker\" with the kIsInternal Symbol, attackers can modify the isInternal value when an inspector is attached within the Worker constructor before initializing a new WorkerImpl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30587"
    },
    {
      "cve": "CVE-2023-30588",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an invalid public key is used to create an x509 certificate using the crypto.X509Certificate() API a non-expect termination occurs making it susceptible to DoS attacks when the attacker could force interruptions of application processing, as the process terminates when accessing public key info of provided certificates from user code. The current context of the users will be gone, and that will cause a DoS scenario. This vulnerability affects all active Node.js versions v16, v18, and, v20.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30588"
    },
    {
      "cve": "CVE-2023-30589",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The llhttp parser in the http module in Node v20.2.0 does not strictly use the CRLF sequence to delimit HTTP requests. This can lead to HTTP Request Smuggling (HRS).\r\n\r\nThe CR character (without LF) is sufficient to delimit HTTP header fields in the llhttp parser. According to RFC7230 section 3, only the CRLF sequence should delimit each header-field. This impacts all Node.js active versions: v16, v18, and, v20",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30589"
    },
    {
      "cve": "CVE-2023-30590",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The generateKeys() API function returned from crypto.createDiffieHellman() only generates missing (or outdated) keys, that is, it only generates a private key if none has been set yet, but the function is also needed to compute the corresponding public key after calling setPrivateKey(). However, the documentation says this API call: \"Generates private and public Diffie-Hellman key values\".\n\nThe documented behavior is very different from the actual behavior, and this difference could easily lead to security issues in applications that use these APIs as the DiffieHellman may be used as the basis for application-level security, implications are consequently broad.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-30590"
    },
    {
      "cve": "CVE-2023-31124",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. When cross-compiling c-ares and using the autotools build system, CARES_RANDOM_FILE will not be set, as seen when cross compiling aarch64 android.  This will downgrade to using rand() as a fallback which could allow an attacker to take advantage of the lack of entropy by not using a CSPRNG. This issue was patched in version 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31124"
    },
    {
      "cve": "CVE-2023-31130",
      "cwe": {
        "id": "CWE-124",
        "name": "Buffer Underwrite (\u0027Buffer Underflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. ares_inet_net_pton() is vulnerable to a buffer underflow for certain ipv6 addresses, in particular \"0::00:00:00/2\" was found to cause an issue.  C-ares only uses this function internally for configuration purposes which would require an administrator to configure such an address via ares_set_sortlist(). However, users may externally use ares_inet_net_pton() for other purposes and thus be vulnerable to more severe issues. This issue has been fixed in 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31130"
    },
    {
      "cve": "CVE-2023-31147",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. When /dev/urandom or RtlGenRandom() are unavailable, c-ares uses rand() to generate random numbers used for DNS query ids. This is not a CSPRNG, and it is also not seeded by srand() so will generate predictable output. Input from the random number generator is fed into a non-compilant RC4 implementation and may not be as strong as the original RC4 implementation. No attempt is made to look for modern OS-provided CSPRNGs like arc4random() that is widely available. This issue has been fixed in version 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31147"
    },
    {
      "cve": "CVE-2023-32002",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32002"
    },
    {
      "cve": "CVE-2023-32003",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32003"
    },
    {
      "cve": "CVE-2023-32004",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of Buffers in file system APIs causing a traversal path to bypass when verifying file permissions.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32004"
    },
    {
      "cve": "CVE-2023-32005",
      "cwe": {
        "id": "CWE-732",
        "name": "Incorrect Permission Assignment for Critical Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument.\n\nThis flaw arises from an inadequate permission model that fails to restrict file stats through the `fs.statfs` API. As a result, malicious actors can retrieve stats from files that they do not have explicit read access to.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32005"
    },
    {
      "cve": "CVE-2023-32006",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `module.constructor.createRequire()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x, and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32006"
    },
    {
      "cve": "CVE-2023-32067",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. c-ares is vulnerable to denial of service. If a target resolver sends a query, the attacker forges a malformed UDP packet with a length of 0 and returns them to the target resolver. The target resolver erroneously interprets the 0 length as a graceful shutdown of the connection. This issue has been patched in version 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32067"
    },
    {
      "cve": "CVE-2023-32558",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of the deprecated API `process.binding()` can bypass the permission model through path traversal. \n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.x.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32558"
    },
    {
      "cve": "CVE-2023-32559",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A privilege escalation vulnerability exists in the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x. The use of the deprecated API `process.binding()` can bypass the policy mechanism by requiring internal modules and eventually take advantage of `process.binding(\u0027spawn_sync\u0027)` run arbitrary code, outside of the limits defined in a `policy.json` file. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32559"
    },
    {
      "cve": "CVE-2023-34035",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Spring Security versions 5.8\u00a0prior to 5.8.5, 6.0\u00a0prior to 6.0.5,\u00a0and 6.1\u00a0prior to 6.1.2\u00a0could be susceptible to authorization rule misconfiguration if the application uses requestMatchers(String)\u00a0and multiple servlets, one of them being Spring MVC\u2019s DispatcherServlet.\u00a0(DispatcherServlet\u00a0is a Spring MVC component that maps HTTP endpoints to methods on @Controller-annotated classes.)\n\nSpecifically, an application is vulnerable when all of the following are true:\n\n  *  Spring MVC is on the classpath\n  *  Spring Security is securing more than one servlet in a single application (one of them being Spring MVC\u2019s DispatcherServlet)\n  *  The application uses requestMatchers(String)\u00a0to refer to endpoints that are not Spring MVC endpoints\n\n\nAn application is not vulnerable if any of the following is true:\n\n  *  The application does not have Spring MVC on the classpath\n  *  The application secures no servlets other than Spring MVC\u2019s DispatcherServlet\n  *  The application uses requestMatchers(String)\u00a0only for Spring MVC endpoints",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-34035"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38039",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl retrieves an HTTP response, it stores the incoming headers so that\nthey can be accessed later via the libcurl headers API.\n\nHowever, curl did not have a limit in how many or how large headers it would\naccept in a response, allowing a malicious server to stream an endless series\nof headers and eventually cause curl to run out of heap memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38039"
    },
    {
      "cve": "CVE-2023-38199",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "coreruleset (aka OWASP ModSecurity Core Rule Set) through 3.3.4 does not detect multiple Content-Type request headers on some platforms. This might allow attackers to bypass a WAF with a crafted payload, aka \"Content-Type confusion\" between the WAF and the backend application. This occurs when the web application relies on only the last Content-Type header. Other platforms may reject the additional Content-Type header or merge conflicting headers, leading to detection as a malformed header.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38199"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\nusing libcurl, if the specific series of conditions are met.\n\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\nthat are the individual handles for single transfers.\n\nlibcurl provides a function call that duplicates en easy handle called\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\n\nIf a transfer has cookies enabled when the handle is duplicated, the\ncookie-enable state is also cloned - but without cloning the actual\ncookies. If the source handle did not read any cookies from a specific file on\ndisk, the cloned version of the handle would instead store the file name as\n`none` (using the four ASCII letters, no quotes).\n\nSubsequent use of the cloned handle that does not explicitly set a source to\nload cookies from would then inadvertently load cookies from a file named\n`none` - if such a file exists and is readable in the current directory of the\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39417",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "IN THE EXTENSION SCRIPT, a SQL Injection vulnerability was found in PostgreSQL if it uses @extowner@, @extschema@, or @extschema:...@ inside a quoting construct (dollar quoting, \u0027\u0027, or \"\"). If an administrator has installed files of a vulnerable, trusted, non-bundled extension, an attacker with database-level CREATE privilege can execute arbitrary code as the bootstrap superuser.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39417"
    },
    {
      "cve": "CVE-2023-39418",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in PostgreSQL with the use of the MERGE command, which fails to test new rows against row security policies defined for UPDATE and SELECT. If UPDATE and SELECT policies forbid some rows that INSERT policies do not forbid, a user could store such rows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39418"
    },
    {
      "cve": "CVE-2023-41080",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027) vulnerability in FORM authentication feature Apache Tomcat.This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M10, from 10.1.0-M1 through 10.0.12, from 9.0.0-M1 through 9.0.79 and from 8.5.0 through 8.5.92.\n\nThe vulnerability is limited to the ROOT (default) web application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-41080"
    },
    {
      "cve": "CVE-2023-46120",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. `maxBodyLebgth` was not used when receiving Message objects.  Attackers could send a very large Message causing a memory overflow and triggering an OOM Error. Users of RabbitMQ may suffer from  DoS attacks from RabbitMQ Java client which will ultimately exhaust the memory of the consumer. This vulnerability was patched in version 5.18.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-46120"
    },
    {
      "cve": "CVE-2024-23810",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application is vulnerable to SQL injection. This could allow an unauthenticated remote attacker to execute arbitrary SQL queries on the server database.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-23810"
    },
    {
      "cve": "CVE-2024-23811",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application allows users to upload arbitrary files via TFTP. This could allow an attacker to upload malicious firmware images or other files, that could potentially lead to remote code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-23811"
    },
    {
      "cve": "CVE-2024-23812",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application incorrectly neutralizes special elements when creating a report which could lead to command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-23812"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SINEC INS before V1.0 SP2 Update 3 is affected by multiple vulnerabilities.\n\nSiemens has released a new version for SINEC INS and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-915275.json"
      },
      {
        "category": "self",
        "summary": "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-319-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-319-08.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-319-08 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-319-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SINEC INS",
    "tracking": {
      "current_release_date": "2024-11-12T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-319-08",
      "initial_release_date": "2024-11-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-11-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.0_SP2_Update_3",
                "product": {
                  "name": "SINEC INS",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEC INS"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-2975",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2975"
    },
    {
      "cve": "CVE-2023-3341",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The code that processes control channel messages sent to `named` calls certain functions recursively during packet parsing. Recursion depth is only limited by the maximum accepted packet size; depending on the environment, this may cause the packet-parsing code to run out of available stack memory, causing `named` to terminate unexpectedly. Since each incoming control channel message is fully parsed before its contents are authenticated, exploiting this flaw does not require the attacker to hold a valid RNDC key; only network access to the control channel\u0027s configured TCP port is necessary. This issue affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18, 9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1 through 9.18.18-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3341"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4236",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in the networking code handling DNS-over-TLS queries may cause `named` to terminate unexpectedly due to an assertion failure. This happens when internal data structures are incorrectly reused under significant DNS-over-TLS query load. This issue affects BIND 9 versions 9.18.0 through 9.18.18 and 9.18.11-S1 through 9.18.18-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4236"
    },
    {
      "cve": "CVE-2023-4408",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4408"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-5517",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in query-handling code can cause `named` to exit prematurely with an assertion failure when: - `nxdomain-redirect \u003cdomain\u003e;` is configured, and - the resolver receives a PTR query for an RFC 1918 address that would normally result in an authoritative NXDOMAIN response. This issue affects BIND 9 versions 9.12.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5517"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5679",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5679"
    },
    {
      "cve": "CVE-2023-5680",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5680"
    },
    {
      "cve": "CVE-2023-6129",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation\r\ncontains a bug that might corrupt the internal state of applications running\r\non PowerPC CPU based platforms if the CPU provides vector instructions.\r\n\r\nImpact summary: If an attacker can influence whether the POLY1305 MAC\r\nalgorithm is used, the application state might be corrupted with various\r\napplication dependent consequences.\r\n\r\nThe POLY1305 MAC (message authentication code) implementation in OpenSSL for\r\nPowerPC CPUs restores the contents of vector registers in a different order\r\nthan they are saved. Thus the contents of some of these vector registers\r\nare corrupted when returning to the caller. The vulnerable code is used only\r\non newer PowerPC processors supporting the PowerISA 2.07 instructions.\r\n\r\nThe consequences of this kind of internal application state corruption can\r\nbe various - from no consequences, if the calling application does not\r\ndepend on the contents of non-volatile XMM registers at all, to the worst\r\nconsequences, where the attacker could get complete control of the application\r\nprocess. However unless the compiler uses the vector registers for storing\r\npointers, the most likely consequence, if any, would be an incorrect result\r\nof some application dependent calculations or a crash leading to a denial of\r\nservice.\r\n\r\nThe POLY1305 MAC algorithm is most frequently used as part of the\r\nCHACHA20-POLY1305 AEAD (authenticated encryption with associated data)\r\nalgorithm. The most common usage of this AEAD cipher is with TLS protocol\r\nversions 1.2 and 1.3. If this cipher is enabled on the server a malicious\r\nclient can influence whether this AEAD cipher is used. This implies that\r\nTLS server applications using OpenSSL can be potentially impacted. However\r\nwe are currently not aware of any concrete application that would be affected\r\nby this issue therefore we consider this a Low severity security issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6129"
    },
    {
      "cve": "CVE-2023-6237",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6237"
    },
    {
      "cve": "CVE-2023-6516",
      "cwe": {
        "id": "CWE-789",
        "name": "Memory Allocation with Excessive Size Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6516"
    },
    {
      "cve": "CVE-2023-7104",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-7104"
    },
    {
      "cve": "CVE-2023-32002",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32002"
    },
    {
      "cve": "CVE-2023-32003",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32003"
    },
    {
      "cve": "CVE-2023-32004",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of Buffers in file system APIs causing a traversal path to bypass when verifying file permissions.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32004"
    },
    {
      "cve": "CVE-2023-32005",
      "cwe": {
        "id": "CWE-732",
        "name": "Incorrect Permission Assignment for Critical Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument.\n\nThis flaw arises from an inadequate permission model that fails to restrict file stats through the `fs.statfs` API. As a result, malicious actors can retrieve stats from files that they do not have explicit read access to.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32005"
    },
    {
      "cve": "CVE-2023-32006",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `module.constructor.createRequire()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x, and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32006"
    },
    {
      "cve": "CVE-2023-32558",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of the deprecated API `process.binding()` can bypass the permission model through path traversal. \n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.x.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32558"
    },
    {
      "cve": "CVE-2023-32559",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A privilege escalation vulnerability exists in the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x. The use of the deprecated API `process.binding()` can bypass the policy mechanism by requiring internal modules and eventually take advantage of `process.binding(\u0027spawn_sync\u0027)` run arbitrary code, outside of the limits defined in a `policy.json` file. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32559"
    },
    {
      "cve": "CVE-2023-38552",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When the Node.js policy feature checks the integrity of a resource against a trusted manifest, the application can intercept the operation and return a forged checksum to the node\u0027s policy implementation, thus effectively disabling the integrity check.\r\nImpacts:\r\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 18.x and, 20.x.\r\nPlease note that at the time this CVE was issued, the policy mechanism is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38552"
    },
    {
      "cve": "CVE-2023-39331",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A previously disclosed vulnerability (CVE-2023-30584) was patched insufficiently in commit 205f1e6. The new path traversal vulnerability arises because the implementation does not protect itself against the application overwriting built-in utility functions with user-defined implementations.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39331"
    },
    {
      "cve": "CVE-2023-39332",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various `node:fs` functions allow specifying paths as either strings or `Uint8Array` objects. In Node.js environments, the `Buffer` class extends the `Uint8Array` class. Node.js prevents path traversal through strings (see CVE-2023-30584) and `Buffer` objects (see CVE-2023-32004), but not through non-`Buffer` `Uint8Array` objects.\r\n\r\nThis is distinct from CVE-2023-32004 which only referred to `Buffer` objects. However, the vulnerability follows the same pattern using `Uint8Array` instead of `Buffer`.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39332"
    },
    {
      "cve": "CVE-2023-39333",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Maliciously crafted export names in an imported WebAssembly module can inject JavaScript code. The injected code may be able to access data and functions that the WebAssembly module itself does not have access to, similar to as if the WebAssembly module was a JavaScript module.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39333"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45143",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Undici is an HTTP/1.1 client written from scratch for Node.js. Prior to version 5.26.2, Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Cookie` headers. By design, `cookie` headers are forbidden request headers, disallowing them to be set in RequestInit.headers in browser environments. Since undici handles headers more liberally than the spec, there was a disconnect from the assumptions the spec made, and undici\u0027s implementation of fetch. As such this may lead to accidental leakage of cookie to a third-party site or a malicious attacker who can control the redirection target (ie. an open redirector) to leak the cookie to the third party site. This was patched in version 5.26.2. There are no known workarounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.9,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-45143"
    },
    {
      "cve": "CVE-2023-46809",
      "cwe": {
        "id": "CWE-385",
        "name": "Covert Timing Channel"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js versions which bundle an unpatched version of OpenSSL or run against a dynamically linked version of OpenSSL which are unpatched are vulnerable to the Marvin Attack - https://people.redhat.com/~hkario/marvin/, if PCKS #1 v1.5 padding is allowed when performing RSA descryption using a private key.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-46809"
    },
    {
      "cve": "CVE-2023-47038",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-47038"
    },
    {
      "cve": "CVE-2023-47039",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Perl. This security issue occurs while Perl for Windows relies on the system path environment variable to find the shell (`cmd.exe`). When running an executable that uses the Windows Perl interpreter, Perl attempts to find and execute `cmd.exe` within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. This flaw allows an attacker with limited privileges to place`cmd.exe` in locations with weak permissions, such as `C:\\ProgramData`. By doing so, arbitrary code can be executed when an administrator attempts to use this executable from these compromised locations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-47039"
    },
    {
      "cve": "CVE-2023-47100",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl before 5.38.2, S_parse_uniprop_string in regcomp.c can write to unallocated space because a property name associated with a \\p{...} regular expression construct is mishandled. The earliest affected version is 5.30.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-47100"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-50387",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the \"KeyTrap\" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-50387"
    },
    {
      "cve": "CVE-2023-50868",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the \"NSEC3\" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-50868"
    },
    {
      "cve": "CVE-2023-52389",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "UTF32Encoding.cpp in POCO has a Poco::UTF32Encoding integer overflow and resultant stack buffer overflow because Poco::UTF32Encoding::convert() and Poco::UTF32::queryConvert() may return a negative integer if a UTF-32 byte sequence evaluates to a value of 0x80000000 or higher. This is fixed in 1.11.8p2, 1.12.5p2, and 1.13.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-52389"
    },
    {
      "cve": "CVE-2024-0232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0232"
    },
    {
      "cve": "CVE-2024-0727",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL\r\nto crash leading to a potential Denial of Service attack\r\n\r\nImpact summary: Applications loading files in the PKCS12 format from untrusted\r\nsources might terminate abruptly.\r\n\r\nA file in PKCS12 format can contain certificates and keys and may come from an\r\nuntrusted source. The PKCS12 specification allows certain fields to be NULL, but\r\nOpenSSL does not correctly check for this case. This can lead to a NULL pointer\r\ndereference that results in OpenSSL crashing. If an application processes PKCS12\r\nfiles from an untrusted source using the OpenSSL APIs then that application will\r\nbe vulnerable to this issue.\r\n\r\nOpenSSL APIs that are vulnerable to this are: PKCS12_parse(),\r\nPKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()\r\nand PKCS12_newpass().\r\n\r\nWe have also fixed a similar issue in SMIME_write_PKCS7(). However since this\r\nfunction is related to writing data we do not consider it security significant.\r\n\r\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0727"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-4741",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-4741"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-21890",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Node.js Permission Model does not clarify in the documentation that wildcards should be only used as the last character of a file path. For example: ``` --allow-fs-read=/home/node/.ssh/*.pub ``` will ignore `pub` and give access to everything after `.ssh/`. This misleading documentation affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-21890"
    },
    {
      "cve": "CVE-2024-21891",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a remote attacker to bypass security restrictions, caused by improper path traversal sequence sanitization. By using a path traversal attack, an attacker could exploit this vulnerability leading to filesystem permission model bypass.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-21891"
    },
    {
      "cve": "CVE-2024-21892",
      "cwe": {
        "id": "CWE-94",
        "name": "Improper Control of Generation of Code (\u0027Code Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a local authenticated attacker to gain elevated privileges on the system, caused by a bug in the implementation of the exception of CAP_NET_BIND_SERVICE. An attacker could exploit this vulnerability to inject code that inherits the process\u0027s elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-21892"
    },
    {
      "cve": "CVE-2024-21896",
      "cwe": {
        "id": "CWE-27",
        "name": "Path Traversal: \u0027dir/../../filename\u0027"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a remote attacker to traverse directories on the system. By monkey-patching Buffer internals, namely, Buffer.prototype.utf8Write, an attacker could send a specially crafted URL request containing \"dot dot\" sequences (/../) to read arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.9,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-21896"
    },
    {
      "cve": "CVE-2024-22017",
      "cwe": {
        "id": "CWE-250",
        "name": "Execution with Unnecessary Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "setuid() does not affect libuv\u0027s internal io_uring operations if initialized before the call to setuid(). This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid(). This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:L",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-22017"
    },
    {
      "cve": "CVE-2024-22019",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in Node.js HTTP servers allows an attacker to send a specially crafted HTTP request with chunked encoding, leading to resource exhaustion and denial of service (DoS). The server reads an unbounded number of bytes from a single connection, exploiting the lack of limitations on chunk extension bytes. The issue can cause CPU and network bandwidth exhaustion, bypassing standard safeguards like timeouts and body size limits.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-22019"
    },
    {
      "cve": "CVE-2024-22025",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js is vulnerable to a denial of service, caused by a resource exhaustion vulnerability in fetch() brotli decoding . By sending a specially crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-22025"
    },
    {
      "cve": "CVE-2024-24758",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Undici is an HTTP/1.1 client, written from scratch for Node.js. Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Proxy-Authentication` headers. This issue has been patched in versions 5.28.3 and 6.6.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.9,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-24758"
    },
    {
      "cve": "CVE-2024-24806",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libuv is a multi-platform support library with a focus on asynchronous I/O. The `uv_getaddrinfo` function in `src/unix/getaddrinfo.c` (and its windows counterpart `src/win/getaddrinfo.c`), truncates hostnames to 256 characters before calling `getaddrinfo`. This behavior can be exploited to create addresses like `0x00007f000001`, which are considered valid by `getaddrinfo` and could allow an attacker to craft payloads that resolve to unintended IP addresses, bypassing developer checks. The vulnerability arises due to how the `hostname_ascii` variable (with a length of 256 bytes) is handled in `uv_getaddrinfo` and subsequently in `uv__idna_toascii`. When the hostname exceeds 256 characters, it gets truncated without a terminating null byte. As a result attackers may be able to access internal APIs or for websites (similar to MySpace) that allows users to have `username.example.com` pages. Internal services that crawl or cache these user pages can be exposed to SSRF attacks if a malicious user chooses a long vulnerable username. This issue has been addressed in release version 1.48.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-24806"
    },
    {
      "cve": "CVE-2024-27980",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a remote attacker to execute arbitrary commands on the system, caused by the improper handling of batch files in child_process.spawn / child_process.spawnSync. By sending a specially crafted command line argument using args parameter, an attacker could exploit this vulnerability to inject and execute arbitrary commands on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-27980"
    },
    {
      "cve": "CVE-2024-27982",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in the http server, where malformed headers can lead to HTTP request smuggling. Specifically, if a space is placed before a content-length header, it is not interpreted correctly, enabling attackers to smuggle in a second request within the body of the first.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-27982"
    },
    {
      "cve": "CVE-2024-27983",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js is vulnerable to a denial of service, caused by an assertion failure in `node::http2::Http2Session::~Http2Session()`. By sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside, an attacker could exploit this vulnerability to cause the HTTP/2 server to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-27983"
    },
    {
      "cve": "CVE-2024-46888",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly sanitize user provided paths for SFTP-based file up- and downloads. This could allow an authenticated remote attacker to manipulate arbitrary files on the filesystem and achieve arbitrary code execution on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.9,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-46888"
    },
    {
      "cve": "CVE-2024-46889",
      "cwe": {
        "id": "CWE-321",
        "name": "Use of Hard-coded Cryptographic Key"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application uses hard-coded cryptographic key material to obfuscate configuration files. This could allow an attacker to learn that cryptographic key material through reverse engineering of the application binary and decrypt arbitrary backup files.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-46889"
    },
    {
      "cve": "CVE-2024-46890",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly validate input sent to specific endpoints of its web API. This could allow an authenticated remote attacker with high privileges on the application to execute arbitrary code on the underlying OS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-46890"
    },
    {
      "cve": "CVE-2024-46891",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system\u0027s resources and create a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-46891"
    },
    {
      "cve": "CVE-2024-46892",
      "cwe": {
        "id": "CWE-613",
        "name": "Insufficient Session Expiration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly invalidate sessions when the associated user is deleted or disabled or their permissions are modified. This could allow an authenticated attacker to continue performing malicious actions even after their user account has been disabled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-46892"
    },
    {
      "cve": "CVE-2024-46894",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly validate authorization of a user to query the \"/api/sftp/users\" endpoint. This could allow an authenticated remote attacker to gain knowledge about the list of configured users of the SFTP service and also modify that configuration.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-46894"
    }
  ]
}

{
  "GSD": {
    "alias": "CVE-2023-32003",
    "id": "GSD-2023-32003"
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2023-32003"
      ],
      "details": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
      "id": "GSD-2023-32003",
      "modified": "2023-12-13T01:20:23.514760Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "support@hackerone.com",
        "ID": "CVE-2023-32003",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "Node.js",
                    "version": {
                      "version_data": [
                        {
                          "version_affected": "\u003c=",
                          "version_name": "20.5.0",
                          "version_value": "20.5.0"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "Node.js"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js."
          }
        ]
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "lang": "eng",
                "value": "n/a"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "https://hackerone.com/reports/2037887",
            "refsource": "MISC",
            "url": "https://hackerone.com/reports/2037887"
          },
          {
            "name": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/PBOZE2QZIBLFFTYWYN23FGKN6HULZ6HX/",
            "refsource": "MISC",
            "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/PBOZE2QZIBLFFTYWYN23FGKN6HULZ6HX/"
          },
          {
            "name": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JQPELKG2LVTADSB7ME73AV4DXQK47PWK/",
            "refsource": "MISC",
            "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JQPELKG2LVTADSB7ME73AV4DXQK47PWK/"
          },
          {
            "name": "https://security.netapp.com/advisory/ntap-20230915-0009/",
            "refsource": "MISC",
            "url": "https://security.netapp.com/advisory/ntap-20230915-0009/"
          }
        ]
      }
    },
    "nvd.nist.gov": {
      "configurations": {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:nodejs:node.js:*:*:*:*:-:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "20.5.0",
                "versionStartIncluding": "20.0.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:37:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:38:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          }
        ]
      },
      "cve": {
        "CVE_data_meta": {
          "ASSIGNER": "support@hackerone.com",
          "ID": "CVE-2023-32003"
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "en",
              "value": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "en",
                  "value": "CWE-22"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://hackerone.com/reports/2037887",
              "refsource": "MISC",
              "tags": [
                "Issue Tracking"
              ],
              "url": "https://hackerone.com/reports/2037887"
            },
            {
              "name": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/PBOZE2QZIBLFFTYWYN23FGKN6HULZ6HX/",
              "refsource": "MISC",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/PBOZE2QZIBLFFTYWYN23FGKN6HULZ6HX/"
            },
            {
              "name": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JQPELKG2LVTADSB7ME73AV4DXQK47PWK/",
              "refsource": "MISC",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JQPELKG2LVTADSB7ME73AV4DXQK47PWK/"
            },
            {
              "name": "https://security.netapp.com/advisory/ntap-20230915-0009/",
              "refsource": "MISC",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://security.netapp.com/advisory/ntap-20230915-0009/"
            }
          ]
        }
      },
      "impact": {
        "baseMetricV3": {
          "cvssV3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "exploitabilityScore": 3.9,
          "impactScore": 1.4
        }
      },
      "lastModifiedDate": "2023-09-21T19:38Z",
      "publishedDate": "2023-08-15T16:15Z"
    }
  }
}

{
  "affected": [],
  "aliases": [
    "CVE-2023-32003"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-22"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2023-08-15T16:15:10Z",
    "severity": "MODERATE"
  },
  "details": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
  "id": "GHSA-r874-ffh8-2fvj",
  "modified": "2024-04-04T06:57:49Z",
  "published": "2023-08-15T18:31:31Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-32003"
    },
    {
      "type": "WEB",
      "url": "https://hackerone.com/reports/2037887"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JQPELKG2LVTADSB7ME73AV4DXQK47PWK"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/PBOZE2QZIBLFFTYWYN23FGKN6HULZ6HX"
    },
    {
      "type": "WEB",
      "url": "https://security.netapp.com/advisory/ntap-20230915-0009"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
      "type": "CVSS_V3"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SINEC NMS before V2.0 SP1 is affected by multiple vulnerabilities.\n\nSiemens has released an update for SINEC NMS and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-943925.html"
      },
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-943925.json"
      },
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-943925.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-943925.txt"
      }
    ],
    "title": "SSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1",
    "tracking": {
      "current_release_date": "2024-03-12T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-943925",
      "initial_release_date": "2024-02-13T00:00:00Z",
      "revision_history": [
        {
          "date": "2024-02-13T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-03-12T00:00:00Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added missing acknowledgment for CVE-2024-23811"
        }
      ],
      "status": "interim",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "All versions \u003c V2.0 SP1",
                "product": {
                  "name": "SINEC NMS",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEC NMS"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-4203",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A read buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. The read buffer overrun might result in a crash which could lead to a denial of service attack. In theory it could also result in the disclosure of private memory contents (such as private keys, or sensitive plaintext) although we are not aware of any working exploit leading to memory contents disclosure as of the time of release of this advisory. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4203"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0216",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL does not call this function however third party applications might call these functions on untrusted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0216"
    },
    {
      "cve": "CVE-2023-0217",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash. This function can be called on public keys supplied from untrusted sources which could allow an attacker to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but applications might call the function if there are additional security requirements imposed by standards such as FIPS 140-3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0217"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0401",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the digest initialization will fail. There is a missing check for the return value from the initialization function which later leads to invalid usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider. PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS implementation in OpenSSL does not call these functions however third party applications would be affected if they call these functions to verify signatures on untrusted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0401"
    },
    {
      "cve": "CVE-2023-1255",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The AES-XTS cipher decryption implementation for 64 bit ARM\nplatform contains a bug that could cause it to read past the input buffer,\nleading to a crash.\n\nImpact summary: Applications that use the AES-XTS algorithm on the 64 bit ARM\nplatform can crash in rare circumstances. The AES-XTS algorithm is usually\nused for disk encryption.\n\nThe AES-XTS cipher decryption implementation for 64 bit ARM platform will read\npast the end of the ciphertext buffer if the ciphertext size is 4 mod 5 in 16\nbyte blocks, e.g. 144 bytes or 1024 bytes. If the memory after the ciphertext\nbuffer is unmapped, this will trigger a crash which results in a denial of\nservice.\n\nIf an attacker can control the size and location of the ciphertext buffer\nbeing decrypted by an application using AES-XTS on 64 bit ARM, the\napplication is affected. This is fairly unlikely making this issue\na Low severity one.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1255"
    },
    {
      "cve": "CVE-2023-2454",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "schema_element defeats protective search_path changes; It was found that certain database calls in PostgreSQL could permit an authed attacker with elevated database-level privileges to execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2454"
    },
    {
      "cve": "CVE-2023-2455",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Row security policies disregard user ID changes after inlining; PostgreSQL could permit incorrect policies to be applied in certain cases where role-specific policies are used and a given query is planned under one role and then executed under other roles. This scenario can happen under security definer functions or when a common user and query is planned initially and then re-used across multiple SET ROLEs. Applying an incorrect policy may permit a user to complete otherwise-forbidden reads and modifications. This affects only databases that have used CREATE POLICY to define a row security policy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2455"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2975",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2975"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-25690",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Some mod_proxy configurations on Apache HTTP Server versions 2.4.0 through 2.4.55 allow a HTTP Request Smuggling attack.\r\n\r\nConfigurations are affected when mod_proxy is enabled along with some form of RewriteRule  or ProxyPassMatch in which a non-specific pattern matches  some portion of the user-supplied request-target (URL) data and is then re-inserted into the proxied request-target using variable substitution. \r\n\r\nRequest splitting/smuggling could result in bypass of access controls in the proxy server, proxying unintended URLs to existing origin servers, and cache poisoning. Users are recommended to update to at least version 2.4.56 of Apache HTTP Server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-25690"
    },
    {
      "cve": "CVE-2023-27522",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "HTTP Response Smuggling vulnerability in Apache HTTP Server via mod_proxy_uwsgi. This issue affects Apache HTTP Server: from 2.4.30 through 2.4.55.\n\nSpecial characters in the origin response header can truncate/split the response forwarded to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27522"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28319",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use after free vulnerability exists in curl \u003cv8.1.0 in the way libcurl offers a feature to verify an SSH server\u0027s public key using a SHA 256 hash. When this check fails, libcurl would free the memory for the fingerprint before it returns an error message containing the (now freed) hash. This flaw risks inserting sensitive heap-based data into the error message that might be shown to users or otherwise get leaked and revealed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-28319"
    },
    {
      "cve": "CVE-2023-28320",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A denial of service vulnerability exists in curl \u003cv8.1.0 in the way libcurl provides several different backends for resolving host names, selected at build time. If it is built to use the synchronous resolver, it allows name resolves to time-out slow operations using `alarm()` and `siglongjmp()`. When doing this, libcurl used a global buffer that was not mutex protected and a multi-threaded application might therefore crash or otherwise misbehave.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-28320"
    },
    {
      "cve": "CVE-2023-28321",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper certificate validation vulnerability exists in curl \u003cv8.1.0 in the way it supports matching of wildcard patterns when listed as \"Subject Alternative Name\" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (International Domain Name) hosts incorrectly and could as a result accept patterns that otherwise should mismatch. IDN hostnames are converted to puny code before used for certificate checks. Puny coded names always start with `xn--` and should not be allowed to pattern match, but the wildcard check in curl could still check for `x*`, which would match even though the IDN name most likely contained nothing even resembling an `x`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-28321"
    },
    {
      "cve": "CVE-2023-28322",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl \u003cv8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-28322"
    },
    {
      "cve": "CVE-2023-28709",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for CVE-2023-24998 was incomplete for Apache Tomcat 11.0.0-M2 to 11.0.0-M4, 10.1.5 to 10.1.7, 9.0.71 to 9.0.73 and 8.5.85 to 8.5.87. If non-default HTTP       connector settings were used such that the maxParameterCount\u00a0could be reached using query string parameters and a request was       submitted that supplied exactly maxParameterCount parameters\u00a0in the query string, the limit for uploaded request parts could be\u00a0bypassed with the potential for a denial of service to occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-28709"
    },
    {
      "cve": "CVE-2023-30581",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of __proto__ in process.mainModule.__proto__.require() can bypass the policy mechanism and require modules outside of the policy.json definition. This vulnerability affects all users using the experimental policy mechanism in all active release lines: v16, v18 and, v20.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30581"
    },
    {
      "cve": "CVE-2023-30582",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in Node.js, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument. This flaw arises from an inadequate permission model that fails to restrict file watching through the fs.watchFile API. As a result, malicious actors can monitor files that they do not have explicit read access to.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30582"
    },
    {
      "cve": "CVE-2023-30583",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "fs.openAsBlob() can bypass the experimental permission model when using the file system read restriction with the --allow-fs-read flag in Node.js. This vulnerability arises from a missing check in the fs.openAsBlob() API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30583"
    },
    {
      "cve": "CVE-2023-30584",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in the experimental permission model of Node.js leads to improper handling of path traversal bypass when verifying file permissions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30584"
    },
    {
      "cve": "CVE-2023-30585",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been identified in the Node.js (.msi version) installation process, specifically affecting Windows users who install Node.js using the .msi installer. This vulnerability emerges during the repair operation, where the \"msiexec.exe\" process, running under the NT AUTHORITY\\SYSTEM context, attempts to read the %USERPROFILE% environment variable from the current user\u0027s registry.\n\nThe issue arises when the path referenced by the %USERPROFILE% environment variable does not exist. In such cases, the \"msiexec.exe\" process attempts to create the specified path in an unsafe manner, potentially leading to the creation of arbitrary folders in arbitrary locations.\n\nThe severity of this vulnerability is heightened by the fact that the %USERPROFILE% environment variable in the Windows registry can be modified by standard (or \"non-privileged\") users. Consequently, unprivileged actors, including malicious entities or trojans, can manipulate the environment variable key to deceive the privileged \"msiexec.exe\" process. This manipulation can result in the creation of folders in unintended and potentially malicious locations.\n\nIt is important to note that this vulnerability is specific to Windows users who install Node.js using the .msi installer. Users who opt for other installation methods are not affected by this particular issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30585"
    },
    {
      "cve": "CVE-2023-30586",
      "cwe": {
        "id": "CWE-862",
        "name": "Missing Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A privilege escalation vulnerability exists in Node.js 20 that allowed loading arbitrary OpenSSL engines when the experimental permission model is enabled, which can bypass and/or disable the permission model. The attack complexity is high. However, the crypto.setEngine() API can be used to bypass the permission model when called with a compatible OpenSSL engine. The OpenSSL engine can, for example, disable the permission model in the host process by manipulating the process\u0027s stack memory to locate the permission model Permission::enabled_ in the host process\u0027s heap memory. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30586"
    },
    {
      "cve": "CVE-2023-30587",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in Node.js allows for bypassing restrictions set by the --experimental-permission flag using the built-in inspector module (node:inspector). By exploiting the Worker class\u0027s ability to create an \"internal worker\" with the kIsInternal Symbol, attackers can modify the isInternal value when an inspector is attached within the Worker constructor before initializing a new WorkerImpl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30587"
    },
    {
      "cve": "CVE-2023-30588",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an invalid public key is used to create an x509 certificate using the crypto.X509Certificate() API a non-expect termination occurs making it susceptible to DoS attacks when the attacker could force interruptions of application processing, as the process terminates when accessing public key info of provided certificates from user code. The current context of the users will be gone, and that will cause a DoS scenario. This vulnerability affects all active Node.js versions v16, v18, and, v20.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30588"
    },
    {
      "cve": "CVE-2023-30589",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The llhttp parser in the http module in Node v20.2.0 does not strictly use the CRLF sequence to delimit HTTP requests. This can lead to HTTP Request Smuggling (HRS).\r\n\r\nThe CR character (without LF) is sufficient to delimit HTTP header fields in the llhttp parser. According to RFC7230 section 3, only the CRLF sequence should delimit each header-field. This impacts all Node.js active versions: v16, v18, and, v20",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30589"
    },
    {
      "cve": "CVE-2023-30590",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The generateKeys() API function returned from crypto.createDiffieHellman() only generates missing (or outdated) keys, that is, it only generates a private key if none has been set yet, but the function is also needed to compute the corresponding public key after calling setPrivateKey(). However, the documentation says this API call: \"Generates private and public Diffie-Hellman key values\".\n\nThe documented behavior is very different from the actual behavior, and this difference could easily lead to security issues in applications that use these APIs as the DiffieHellman may be used as the basis for application-level security, implications are consequently broad.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-30590"
    },
    {
      "cve": "CVE-2023-31124",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. When cross-compiling c-ares and using the autotools build system, CARES_RANDOM_FILE will not be set, as seen when cross compiling aarch64 android.  This will downgrade to using rand() as a fallback which could allow an attacker to take advantage of the lack of entropy by not using a CSPRNG. This issue was patched in version 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31124"
    },
    {
      "cve": "CVE-2023-31130",
      "cwe": {
        "id": "CWE-124",
        "name": "Buffer Underwrite (\u0027Buffer Underflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. ares_inet_net_pton() is vulnerable to a buffer underflow for certain ipv6 addresses, in particular \"0::00:00:00/2\" was found to cause an issue.  C-ares only uses this function internally for configuration purposes which would require an administrator to configure such an address via ares_set_sortlist(). However, users may externally use ares_inet_net_pton() for other purposes and thus be vulnerable to more severe issues. This issue has been fixed in 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31130"
    },
    {
      "cve": "CVE-2023-31147",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. When /dev/urandom or RtlGenRandom() are unavailable, c-ares uses rand() to generate random numbers used for DNS query ids. This is not a CSPRNG, and it is also not seeded by srand() so will generate predictable output. Input from the random number generator is fed into a non-compilant RC4 implementation and may not be as strong as the original RC4 implementation. No attempt is made to look for modern OS-provided CSPRNGs like arc4random() that is widely available. This issue has been fixed in version 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31147"
    },
    {
      "cve": "CVE-2023-32002",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32002"
    },
    {
      "cve": "CVE-2023-32003",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32003"
    },
    {
      "cve": "CVE-2023-32004",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of Buffers in file system APIs causing a traversal path to bypass when verifying file permissions.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32004"
    },
    {
      "cve": "CVE-2023-32005",
      "cwe": {
        "id": "CWE-732",
        "name": "Incorrect Permission Assignment for Critical Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument.\n\nThis flaw arises from an inadequate permission model that fails to restrict file stats through the `fs.statfs` API. As a result, malicious actors can retrieve stats from files that they do not have explicit read access to.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32005"
    },
    {
      "cve": "CVE-2023-32006",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `module.constructor.createRequire()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x, and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32006"
    },
    {
      "cve": "CVE-2023-32067",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "c-ares is an asynchronous resolver library. c-ares is vulnerable to denial of service. If a target resolver sends a query, the attacker forges a malformed UDP packet with a length of 0 and returns them to the target resolver. The target resolver erroneously interprets the 0 length as a graceful shutdown of the connection. This issue has been patched in version 1.19.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32067"
    },
    {
      "cve": "CVE-2023-32558",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of the deprecated API `process.binding()` can bypass the permission model through path traversal. \n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.x.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32558"
    },
    {
      "cve": "CVE-2023-32559",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A privilege escalation vulnerability exists in the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x. The use of the deprecated API `process.binding()` can bypass the policy mechanism by requiring internal modules and eventually take advantage of `process.binding(\u0027spawn_sync\u0027)` run arbitrary code, outside of the limits defined in a `policy.json` file. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32559"
    },
    {
      "cve": "CVE-2023-34035",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Spring Security versions 5.8\u00a0prior to 5.8.5, 6.0\u00a0prior to 6.0.5,\u00a0and 6.1\u00a0prior to 6.1.2\u00a0could be susceptible to authorization rule misconfiguration if the application uses requestMatchers(String)\u00a0and multiple servlets, one of them being Spring MVC\u2019s DispatcherServlet.\u00a0(DispatcherServlet\u00a0is a Spring MVC component that maps HTTP endpoints to methods on @Controller-annotated classes.)\n\nSpecifically, an application is vulnerable when all of the following are true:\n\n  *  Spring MVC is on the classpath\n  *  Spring Security is securing more than one servlet in a single application (one of them being Spring MVC\u2019s DispatcherServlet)\n  *  The application uses requestMatchers(String)\u00a0to refer to endpoints that are not Spring MVC endpoints\n\n\nAn application is not vulnerable if any of the following is true:\n\n  *  The application does not have Spring MVC on the classpath\n  *  The application secures no servlets other than Spring MVC\u2019s DispatcherServlet\n  *  The application uses requestMatchers(String)\u00a0only for Spring MVC endpoints",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-34035"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38039",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl retrieves an HTTP response, it stores the incoming headers so that\nthey can be accessed later via the libcurl headers API.\n\nHowever, curl did not have a limit in how many or how large headers it would\naccept in a response, allowing a malicious server to stream an endless series\nof headers and eventually cause curl to run out of heap memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-38039"
    },
    {
      "cve": "CVE-2023-38199",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "coreruleset (aka OWASP ModSecurity Core Rule Set) through 3.3.4 does not detect multiple Content-Type request headers on some platforms. This might allow attackers to bypass a WAF with a crafted payload, aka \"Content-Type confusion\" between the WAF and the backend application. This occurs when the web application relies on only the last Content-Type header. Other platforms may reject the additional Content-Type header or merge conflicting headers, leading to detection as a malformed header.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-38199"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39417",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "IN THE EXTENSION SCRIPT, a SQL Injection vulnerability was found in PostgreSQL if it uses @extowner@, @extschema@, or @extschema:...@ inside a quoting construct (dollar quoting, \u0027\u0027, or \"\"). If an administrator has installed files of a vulnerable, trusted, non-bundled extension, an attacker with database-level CREATE privilege can execute arbitrary code as the bootstrap superuser.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39417"
    },
    {
      "cve": "CVE-2023-39418",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in PostgreSQL with the use of the MERGE command, which fails to test new rows against row security policies defined for UPDATE and SELECT. If UPDATE and SELECT policies forbid some rows that INSERT policies do not forbid, a user could store such rows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39418"
    },
    {
      "cve": "CVE-2023-41080",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027) vulnerability in FORM authentication feature Apache Tomcat.This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M10, from 10.1.0-M1 through 10.0.12, from 9.0.0-M1 through 9.0.79 and from 8.5.0 through 8.5.92.\n\nThe vulnerability is limited to the ROOT (default) web application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-41080"
    },
    {
      "cve": "CVE-2023-46120",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. `maxBodyLebgth` was not used when receiving Message objects.  Attackers could send a very large Message causing a memory overflow and triggering an OOM Error. Users of RabbitMQ may suffer from  DoS attacks from RabbitMQ Java client which will ultimately exhaust the memory of the consumer. This vulnerability was patched in version 5.18.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-46120"
    },
    {
      "cve": "CVE-2024-23810",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application is vulnerable to SQL injection. This could allow an unauthenticated remote attacker to execute arbitrary SQL queries on the server database.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-23810"
    },
    {
      "cve": "CVE-2024-23811",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application allows users to upload arbitrary files via TFTP. This could allow an attacker to upload malicious firmware images or other files, that could potentially lead to remote code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-23811"
    },
    {
      "cve": "CVE-2024-23812",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application incorrectly neutralizes special elements when creating a report which could lead to command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.0 SP1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109826954/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-23812"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SINEC INS before V1.0 SP2 Update 3 is affected by multiple vulnerabilities.\n\nSiemens has released a new version for SINEC INS and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
      },
      {
        "category": "self",
        "summary": "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-915275.json"
      }
    ],
    "title": "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3",
    "tracking": {
      "current_release_date": "2024-11-12T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-915275",
      "initial_release_date": "2024-11-12T00:00:00Z",
      "revision_history": [
        {
          "date": "2024-11-12T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "interim",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "All versions \u003c V1.0 SP2 Update 3",
                "product": {
                  "name": "SINEC INS",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEC INS"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-2975",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2975"
    },
    {
      "cve": "CVE-2023-3341",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The code that processes control channel messages sent to `named` calls certain functions recursively during packet parsing. Recursion depth is only limited by the maximum accepted packet size; depending on the environment, this may cause the packet-parsing code to run out of available stack memory, causing `named` to terminate unexpectedly. Since each incoming control channel message is fully parsed before its contents are authenticated, exploiting this flaw does not require the attacker to hold a valid RNDC key; only network access to the control channel\u0027s configured TCP port is necessary. This issue affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18, 9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1 through 9.18.18-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3341"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4236",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in the networking code handling DNS-over-TLS queries may cause `named` to terminate unexpectedly due to an assertion failure. This happens when internal data structures are incorrectly reused under significant DNS-over-TLS query load. This issue affects BIND 9 versions 9.18.0 through 9.18.18 and 9.18.11-S1 through 9.18.18-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4236"
    },
    {
      "cve": "CVE-2023-4408",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4408"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-5517",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in query-handling code can cause `named` to exit prematurely with an assertion failure when: - `nxdomain-redirect \u003cdomain\u003e;` is configured, and - the resolver receives a PTR query for an RFC 1918 address that would normally result in an authoritative NXDOMAIN response. This issue affects BIND 9 versions 9.12.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5517"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5679",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5679"
    },
    {
      "cve": "CVE-2023-5680",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5680"
    },
    {
      "cve": "CVE-2023-6129",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation\r\ncontains a bug that might corrupt the internal state of applications running\r\non PowerPC CPU based platforms if the CPU provides vector instructions.\r\n\r\nImpact summary: If an attacker can influence whether the POLY1305 MAC\r\nalgorithm is used, the application state might be corrupted with various\r\napplication dependent consequences.\r\n\r\nThe POLY1305 MAC (message authentication code) implementation in OpenSSL for\r\nPowerPC CPUs restores the contents of vector registers in a different order\r\nthan they are saved. Thus the contents of some of these vector registers\r\nare corrupted when returning to the caller. The vulnerable code is used only\r\non newer PowerPC processors supporting the PowerISA 2.07 instructions.\r\n\r\nThe consequences of this kind of internal application state corruption can\r\nbe various - from no consequences, if the calling application does not\r\ndepend on the contents of non-volatile XMM registers at all, to the worst\r\nconsequences, where the attacker could get complete control of the application\r\nprocess. However unless the compiler uses the vector registers for storing\r\npointers, the most likely consequence, if any, would be an incorrect result\r\nof some application dependent calculations or a crash leading to a denial of\r\nservice.\r\n\r\nThe POLY1305 MAC algorithm is most frequently used as part of the\r\nCHACHA20-POLY1305 AEAD (authenticated encryption with associated data)\r\nalgorithm. The most common usage of this AEAD cipher is with TLS protocol\r\nversions 1.2 and 1.3. If this cipher is enabled on the server a malicious\r\nclient can influence whether this AEAD cipher is used. This implies that\r\nTLS server applications using OpenSSL can be potentially impacted. However\r\nwe are currently not aware of any concrete application that would be affected\r\nby this issue therefore we consider this a Low severity security issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6129"
    },
    {
      "cve": "CVE-2023-6237",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6237"
    },
    {
      "cve": "CVE-2023-6516",
      "cwe": {
        "id": "CWE-789",
        "name": "Memory Allocation with Excessive Size Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6516"
    },
    {
      "cve": "CVE-2023-7104",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-7104"
    },
    {
      "cve": "CVE-2023-32002",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32002"
    },
    {
      "cve": "CVE-2023-32003",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32003"
    },
    {
      "cve": "CVE-2023-32004",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of Buffers in file system APIs causing a traversal path to bypass when verifying file permissions.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32004"
    },
    {
      "cve": "CVE-2023-32005",
      "cwe": {
        "id": "CWE-732",
        "name": "Incorrect Permission Assignment for Critical Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument.\n\nThis flaw arises from an inadequate permission model that fails to restrict file stats through the `fs.statfs` API. As a result, malicious actors can retrieve stats from files that they do not have explicit read access to.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32005"
    },
    {
      "cve": "CVE-2023-32006",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of `module.constructor.createRequire()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x, and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32006"
    },
    {
      "cve": "CVE-2023-32558",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of the deprecated API `process.binding()` can bypass the permission model through path traversal. \n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.x.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32558"
    },
    {
      "cve": "CVE-2023-32559",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A privilege escalation vulnerability exists in the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x. The use of the deprecated API `process.binding()` can bypass the policy mechanism by requiring internal modules and eventually take advantage of `process.binding(\u0027spawn_sync\u0027)` run arbitrary code, outside of the limits defined in a `policy.json` file. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32559"
    },
    {
      "cve": "CVE-2023-38552",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When the Node.js policy feature checks the integrity of a resource against a trusted manifest, the application can intercept the operation and return a forged checksum to the node\u0027s policy implementation, thus effectively disabling the integrity check.\r\nImpacts:\r\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 18.x and, 20.x.\r\nPlease note that at the time this CVE was issued, the policy mechanism is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-38552"
    },
    {
      "cve": "CVE-2023-39331",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A previously disclosed vulnerability (CVE-2023-30584) was patched insufficiently in commit 205f1e6. The new path traversal vulnerability arises because the implementation does not protect itself against the application overwriting built-in utility functions with user-defined implementations.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39331"
    },
    {
      "cve": "CVE-2023-39332",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various `node:fs` functions allow specifying paths as either strings or `Uint8Array` objects. In Node.js environments, the `Buffer` class extends the `Uint8Array` class. Node.js prevents path traversal through strings (see CVE-2023-30584) and `Buffer` objects (see CVE-2023-32004), but not through non-`Buffer` `Uint8Array` objects.\r\n\r\nThis is distinct from CVE-2023-32004 which only referred to `Buffer` objects. However, the vulnerability follows the same pattern using `Uint8Array` instead of `Buffer`.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39332"
    },
    {
      "cve": "CVE-2023-39333",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Maliciously crafted export names in an imported WebAssembly module can inject JavaScript code. The injected code may be able to access data and functions that the WebAssembly module itself does not have access to, similar to as if the WebAssembly module was a JavaScript module.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39333"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45143",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Undici is an HTTP/1.1 client written from scratch for Node.js. Prior to version 5.26.2, Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Cookie` headers. By design, `cookie` headers are forbidden request headers, disallowing them to be set in RequestInit.headers in browser environments. Since undici handles headers more liberally than the spec, there was a disconnect from the assumptions the spec made, and undici\u0027s implementation of fetch. As such this may lead to accidental leakage of cookie to a third-party site or a malicious attacker who can control the redirection target (ie. an open redirector) to leak the cookie to the third party site. This was patched in version 5.26.2. There are no known workarounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.9,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-45143"
    },
    {
      "cve": "CVE-2023-46809",
      "cwe": {
        "id": "CWE-385",
        "name": "Covert Timing Channel"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js versions which bundle an unpatched version of OpenSSL or run against a dynamically linked version of OpenSSL which are unpatched are vulnerable to the Marvin Attack - https://people.redhat.com/~hkario/marvin/, if PCKS #1 v1.5 padding is allowed when performing RSA descryption using a private key.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-46809"
    },
    {
      "cve": "CVE-2023-47038",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-47038"
    },
    {
      "cve": "CVE-2023-47039",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Perl. This security issue occurs while Perl for Windows relies on the system path environment variable to find the shell (`cmd.exe`). When running an executable that uses the Windows Perl interpreter, Perl attempts to find and execute `cmd.exe` within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. This flaw allows an attacker with limited privileges to place`cmd.exe` in locations with weak permissions, such as `C:\\ProgramData`. By doing so, arbitrary code can be executed when an administrator attempts to use this executable from these compromised locations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-47039"
    },
    {
      "cve": "CVE-2023-47100",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl before 5.38.2, S_parse_uniprop_string in regcomp.c can write to unallocated space because a property name associated with a \\p{...} regular expression construct is mishandled. The earliest affected version is 5.30.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-47100"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-50387",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the \"KeyTrap\" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-50387"
    },
    {
      "cve": "CVE-2023-50868",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the \"NSEC3\" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-50868"
    },
    {
      "cve": "CVE-2023-52389",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "UTF32Encoding.cpp in POCO has a Poco::UTF32Encoding integer overflow and resultant stack buffer overflow because Poco::UTF32Encoding::convert() and Poco::UTF32::queryConvert() may return a negative integer if a UTF-32 byte sequence evaluates to a value of 0x80000000 or higher. This is fixed in 1.11.8p2, 1.12.5p2, and 1.13.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-52389"
    },
    {
      "cve": "CVE-2024-0232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0232"
    },
    {
      "cve": "CVE-2024-0727",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL\r\nto crash leading to a potential Denial of Service attack\r\n\r\nImpact summary: Applications loading files in the PKCS12 format from untrusted\r\nsources might terminate abruptly.\r\n\r\nA file in PKCS12 format can contain certificates and keys and may come from an\r\nuntrusted source. The PKCS12 specification allows certain fields to be NULL, but\r\nOpenSSL does not correctly check for this case. This can lead to a NULL pointer\r\ndereference that results in OpenSSL crashing. If an application processes PKCS12\r\nfiles from an untrusted source using the OpenSSL APIs then that application will\r\nbe vulnerable to this issue.\r\n\r\nOpenSSL APIs that are vulnerable to this are: PKCS12_parse(),\r\nPKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()\r\nand PKCS12_newpass().\r\n\r\nWe have also fixed a similar issue in SMIME_write_PKCS7(). However since this\r\nfunction is related to writing data we do not consider it security significant.\r\n\r\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0727"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-4741",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-4741"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-21890",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Node.js Permission Model does not clarify in the documentation that wildcards should be only used as the last character of a file path. For example: ``` --allow-fs-read=/home/node/.ssh/*.pub ``` will ignore `pub` and give access to everything after `.ssh/`. This misleading documentation affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-21890"
    },
    {
      "cve": "CVE-2024-21891",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a remote attacker to bypass security restrictions, caused by improper path traversal sequence sanitization. By using a path traversal attack, an attacker could exploit this vulnerability leading to filesystem permission model bypass.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-21891"
    },
    {
      "cve": "CVE-2024-21892",
      "cwe": {
        "id": "CWE-94",
        "name": "Improper Control of Generation of Code (\u0027Code Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a local authenticated attacker to gain elevated privileges on the system, caused by a bug in the implementation of the exception of CAP_NET_BIND_SERVICE. An attacker could exploit this vulnerability to inject code that inherits the process\u0027s elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-21892"
    },
    {
      "cve": "CVE-2024-21896",
      "cwe": {
        "id": "CWE-27",
        "name": "Path Traversal: \u0027dir/../../filename\u0027"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a remote attacker to traverse directories on the system. By monkey-patching Buffer internals, namely, Buffer.prototype.utf8Write, an attacker could send a specially crafted URL request containing \"dot dot\" sequences (/../) to read arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.9,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-21896"
    },
    {
      "cve": "CVE-2024-22017",
      "cwe": {
        "id": "CWE-250",
        "name": "Execution with Unnecessary Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "setuid() does not affect libuv\u0027s internal io_uring operations if initialized before the call to setuid(). This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid(). This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:L",
            "version": "3.0"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-22017"
    },
    {
      "cve": "CVE-2024-22019",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in Node.js HTTP servers allows an attacker to send a specially crafted HTTP request with chunked encoding, leading to resource exhaustion and denial of service (DoS). The server reads an unbounded number of bytes from a single connection, exploiting the lack of limitations on chunk extension bytes. The issue can cause CPU and network bandwidth exhaustion, bypassing standard safeguards like timeouts and body size limits.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-22019"
    },
    {
      "cve": "CVE-2024-22025",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js is vulnerable to a denial of service, caused by a resource exhaustion vulnerability in fetch() brotli decoding . By sending a specially crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-22025"
    },
    {
      "cve": "CVE-2024-24758",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Undici is an HTTP/1.1 client, written from scratch for Node.js. Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Proxy-Authentication` headers. This issue has been patched in versions 5.28.3 and 6.6.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.9,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-24758"
    },
    {
      "cve": "CVE-2024-24806",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libuv is a multi-platform support library with a focus on asynchronous I/O. The `uv_getaddrinfo` function in `src/unix/getaddrinfo.c` (and its windows counterpart `src/win/getaddrinfo.c`), truncates hostnames to 256 characters before calling `getaddrinfo`. This behavior can be exploited to create addresses like `0x00007f000001`, which are considered valid by `getaddrinfo` and could allow an attacker to craft payloads that resolve to unintended IP addresses, bypassing developer checks. The vulnerability arises due to how the `hostname_ascii` variable (with a length of 256 bytes) is handled in `uv_getaddrinfo` and subsequently in `uv__idna_toascii`. When the hostname exceeds 256 characters, it gets truncated without a terminating null byte. As a result attackers may be able to access internal APIs or for websites (similar to MySpace) that allows users to have `username.example.com` pages. Internal services that crawl or cache these user pages can be exposed to SSRF attacks if a malicious user chooses a long vulnerable username. This issue has been addressed in release version 1.48.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-24806"
    },
    {
      "cve": "CVE-2024-27980",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js could allow a remote attacker to execute arbitrary commands on the system, caused by the improper handling of batch files in child_process.spawn / child_process.spawnSync. By sending a specially crafted command line argument using args parameter, an attacker could exploit this vulnerability to inject and execute arbitrary commands on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-27980"
    },
    {
      "cve": "CVE-2024-27982",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in the http server, where malformed headers can lead to HTTP request smuggling. Specifically, if a space is placed before a content-length header, it is not interpreted correctly, enabling attackers to smuggle in a second request within the body of the first.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-27982"
    },
    {
      "cve": "CVE-2024-27983",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Node.js is vulnerable to a denial of service, caused by an assertion failure in `node::http2::Http2Session::~Http2Session()`. By sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside, an attacker could exploit this vulnerability to cause the HTTP/2 server to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-27983"
    },
    {
      "cve": "CVE-2024-46888",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly sanitize user provided paths for SFTP-based file up- and downloads. This could allow an authenticated remote attacker to manipulate arbitrary files on the filesystem and achieve arbitrary code execution on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.9,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-46888"
    },
    {
      "cve": "CVE-2024-46889",
      "cwe": {
        "id": "CWE-321",
        "name": "Use of Hard-coded Cryptographic Key"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application uses hard-coded cryptographic key material to obfuscate configuration files. This could allow an attacker to learn that cryptographic key material through reverse engineering of the application binary and decrypt arbitrary backup files.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-46889"
    },
    {
      "cve": "CVE-2024-46890",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly validate input sent to specific endpoints of its web API. This could allow an authenticated remote attacker with high privileges on the application to execute arbitrary code on the underlying OS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-46890"
    },
    {
      "cve": "CVE-2024-46891",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system\u0027s resources and create a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-46891"
    },
    {
      "cve": "CVE-2024-46892",
      "cwe": {
        "id": "CWE-613",
        "name": "Insufficient Session Expiration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly invalidate sessions when the associated user is deleted or disabled or their permissions are modified. This could allow an authenticated attacker to continue performing malicious actions even after their user account has been disabled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-46892"
    },
    {
      "cve": "CVE-2024-46894",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected application does not properly validate authorization of a user to query the \"/api/sftp/users\" endpoint. This could allow an authenticated remote attacker to gain knowledge about the list of configured users of the SFTP service and also modify that configuration.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 3 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109975745/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-46894"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "FreeFlow-Druckserver ist eine Druckserveranwendung f\u00fcr Xerox-Produktionsdrucker, die Flexibilit\u00e4t, umfangreiche Workflow-Optionen und eine Farbverwaltung bietet.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein Angreifer kann mehrere Schwachstellen in Xerox FreeFlow Print Server ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Linux\n- UNIX",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-2917 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-2917.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-2917 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-2917"
      },
      {
        "category": "external",
        "summary": "XEROX Security Advisory XRX24-001 vom 2024-03-11",
        "url": "https://security.business.xerox.com/wp-content/uploads/2024/03/Xerox%C2%AE-Security-Bulletin-XRX24-001-Xerox%C2%AE-FreeFlow%C2%AE-Print-Server-v9.pdf"
      },
      {
        "category": "external",
        "summary": "XEROX Security Advisory XRX24-005 vom 2024-03-04",
        "url": "https://security.business.xerox.com/wp-content/uploads/2024/03/Xerox-Security-Bulletin-XRX24-005-Xerox-FreeFlow%C2%AE-Print-Server-v9_Feb-2024.pdf"
      },
      {
        "category": "external",
        "summary": "Xerox Security Bulletin XRX23-016 vom 2023-11-14",
        "url": "https://securitydocs.business.xerox.com/wp-content/uploads/2023/11/XRX23-016_FFPSv7-S10_MediaInstall_Nov2023.pdf"
      },
      {
        "category": "external",
        "summary": "Xerox Security Bulletin XRX23-017 vom 2023-11-14",
        "url": "https://securitydocs.business.xerox.com/wp-content/uploads/2023/11/XRX23-017_FFPSv7-S11_MediaInstall_Nov2023.pdf"
      },
      {
        "category": "external",
        "summary": "XEROX Security Advisory XRX23-019 vom 2023-11-16",
        "url": "https://security.business.xerox.com/wp-content/uploads/2023/11/Xerox-Security-Bulletin-XRX23-019-Xerox%C2%AE-FreeFlow%C2%AE-Print-Server-v9.pdf"
      },
      {
        "category": "external",
        "summary": "Xerox Security Bulletin XRX23-021",
        "url": "https://securitydocs.business.xerox.com/wp-content/uploads/2023/11/XRX23-021_FFPSv2_Win10_SecurityBulletin_Nov2023.pdf"
      },
      {
        "category": "external",
        "summary": "XEROX Security Advisory XRX23-022 vom 2023-12-01",
        "url": "https://security.business.xerox.com/wp-content/uploads/2023/11/XRX23-022_FFPSv9-S11_MediaInstall_Nov2023.pdf"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2024:3949-1 vom 2024-11-08",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2024-November/019796.html"
      }
    ],
    "source_lang": "en-US",
    "title": "Xerox FreeFlow Print Server: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2024-11-07T23:00:00.000+00:00",
      "generator": {
        "date": "2024-11-08T11:11:46.977+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.8"
        }
      },
      "id": "WID-SEC-W-2023-2917",
      "initial_release_date": "2023-11-14T23:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-11-14T23:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-11-16T23:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von XEROX aufgenommen"
        },
        {
          "date": "2023-11-28T23:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von XEROX aufgenommen"
        },
        {
          "date": "2023-11-30T23:00:00.000+00:00",
          "number": "4",
          "summary": "Neue Updates von XEROX aufgenommen"
        },
        {
          "date": "2024-03-03T23:00:00.000+00:00",
          "number": "5",
          "summary": "Neue Updates von XEROX aufgenommen"
        },
        {
          "date": "2024-03-11T23:00:00.000+00:00",
          "number": "6",
          "summary": "Neue Updates von XEROX aufgenommen"
        },
        {
          "date": "2024-11-07T23:00:00.000+00:00",
          "number": "7",
          "summary": "Neue Updates von SUSE aufgenommen"
        }
      ],
      "status": "final",
      "version": "7"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "SUSE Linux",
            "product": {
              "name": "SUSE Linux",
              "product_id": "T002207",
              "product_identification_helper": {
                "cpe": "cpe:/o:suse:suse_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      },
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "9",
                "product": {
                  "name": "Xerox FreeFlow Print Server 9",
                  "product_id": "T002977",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:xerox:freeflow_print_server:9"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "v7",
                "product": {
                  "name": "Xerox FreeFlow Print Server v7",
                  "product_id": "T015631",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:xerox:freeflow_print_server:v7"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "v9",
                "product": {
                  "name": "Xerox FreeFlow Print Server v9",
                  "product_id": "T015632",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:xerox:freeflow_print_server:v9"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "v9 for Solaris",
                "product": {
                  "name": "Xerox FreeFlow Print Server v9 for Solaris",
                  "product_id": "T028053",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:xerox:freeflow_print_server:v9_for_solaris"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "v2 / Windows 10",
                "product": {
                  "name": "Xerox FreeFlow Print Server v2 / Windows 10",
                  "product_id": "T031383",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:xerox:freeflow_print_server:v2__windows_10"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "FreeFlow Print Server"
          }
        ],
        "category": "vendor",
        "name": "Xerox"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2017-5715",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2017-5715"
    },
    {
      "cve": "CVE-2018-3639",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2018-3639"
    },
    {
      "cve": "CVE-2021-44917",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2021-44917"
    },
    {
      "cve": "CVE-2021-46784",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2021-46784"
    },
    {
      "cve": "CVE-2022-31008",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-31008"
    },
    {
      "cve": "CVE-2022-32206",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32221",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-3924",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-3924"
    },
    {
      "cve": "CVE-2022-41409",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-41409"
    },
    {
      "cve": "CVE-2022-48337",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-48337"
    },
    {
      "cve": "CVE-2022-48338",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-48338"
    },
    {
      "cve": "CVE-2022-48339",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-48339"
    },
    {
      "cve": "CVE-2022-4899",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2022-4899"
    },
    {
      "cve": "CVE-2023-0049",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0049"
    },
    {
      "cve": "CVE-2023-0051",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0051"
    },
    {
      "cve": "CVE-2023-0054",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0054"
    },
    {
      "cve": "CVE-2023-0288",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0288"
    },
    {
      "cve": "CVE-2023-0465",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0512",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0512"
    },
    {
      "cve": "CVE-2023-0666",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0666"
    },
    {
      "cve": "CVE-2023-0668",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-0668"
    },
    {
      "cve": "CVE-2023-1127",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-1127"
    },
    {
      "cve": "CVE-2023-1170",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-1170"
    },
    {
      "cve": "CVE-2023-1175",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-1175"
    },
    {
      "cve": "CVE-2023-1393",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-1393"
    },
    {
      "cve": "CVE-2023-1906",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-1906"
    },
    {
      "cve": "CVE-2023-1981",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-1981"
    },
    {
      "cve": "CVE-2023-2004",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2004"
    },
    {
      "cve": "CVE-2023-22025",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-22025"
    },
    {
      "cve": "CVE-2023-22043",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-22043"
    },
    {
      "cve": "CVE-2023-22067",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-22067"
    },
    {
      "cve": "CVE-2023-22081",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-22081"
    },
    {
      "cve": "CVE-2023-22128",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-22128"
    },
    {
      "cve": "CVE-2023-22129",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-22129"
    },
    {
      "cve": "CVE-2023-23914",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-24805",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-24805"
    },
    {
      "cve": "CVE-2023-25193",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-25193"
    },
    {
      "cve": "CVE-2023-2650",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-27985",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-27985"
    },
    {
      "cve": "CVE-2023-27986",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-27986"
    },
    {
      "cve": "CVE-2023-2828",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2828"
    },
    {
      "cve": "CVE-2023-28319",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-28319"
    },
    {
      "cve": "CVE-2023-28320",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-28320"
    },
    {
      "cve": "CVE-2023-28321",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-28321"
    },
    {
      "cve": "CVE-2023-28322",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-28322"
    },
    {
      "cve": "CVE-2023-28450",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-28450"
    },
    {
      "cve": "CVE-2023-2854",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2854"
    },
    {
      "cve": "CVE-2023-2855",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2855"
    },
    {
      "cve": "CVE-2023-2857",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2857"
    },
    {
      "cve": "CVE-2023-2858",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2858"
    },
    {
      "cve": "CVE-2023-2879",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2879"
    },
    {
      "cve": "CVE-2023-28879",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-28879"
    },
    {
      "cve": "CVE-2023-2911",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-2911"
    },
    {
      "cve": "CVE-2023-29402",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29402"
    },
    {
      "cve": "CVE-2023-29403",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29403"
    },
    {
      "cve": "CVE-2023-29404",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29404"
    },
    {
      "cve": "CVE-2023-29405",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29405"
    },
    {
      "cve": "CVE-2023-29406",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29406"
    },
    {
      "cve": "CVE-2023-29409",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29409"
    },
    {
      "cve": "CVE-2023-29491",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-30581",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30581"
    },
    {
      "cve": "CVE-2023-30582",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30582"
    },
    {
      "cve": "CVE-2023-30583",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30583"
    },
    {
      "cve": "CVE-2023-30584",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30584"
    },
    {
      "cve": "CVE-2023-30585",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30585"
    },
    {
      "cve": "CVE-2023-30586",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30586"
    },
    {
      "cve": "CVE-2023-30587",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30587"
    },
    {
      "cve": "CVE-2023-30588",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30588"
    },
    {
      "cve": "CVE-2023-30589",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30589"
    },
    {
      "cve": "CVE-2023-30590",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-30590"
    },
    {
      "cve": "CVE-2023-31122",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-31122"
    },
    {
      "cve": "CVE-2023-31124",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-31124"
    },
    {
      "cve": "CVE-2023-31130",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-31130"
    },
    {
      "cve": "CVE-2023-31147",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-31147"
    },
    {
      "cve": "CVE-2023-3138",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-3138"
    },
    {
      "cve": "CVE-2023-31484",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-31484"
    },
    {
      "cve": "CVE-2023-31486",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-31486"
    },
    {
      "cve": "CVE-2023-3195",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-3195"
    },
    {
      "cve": "CVE-2023-32002",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32002"
    },
    {
      "cve": "CVE-2023-32003",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32003"
    },
    {
      "cve": "CVE-2023-32004",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32004"
    },
    {
      "cve": "CVE-2023-32005",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32005"
    },
    {
      "cve": "CVE-2023-32006",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32006"
    },
    {
      "cve": "CVE-2023-32067",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32067"
    },
    {
      "cve": "CVE-2023-3247",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-3247"
    },
    {
      "cve": "CVE-2023-32558",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32558"
    },
    {
      "cve": "CVE-2023-32559",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32559"
    },
    {
      "cve": "CVE-2023-32573",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32573"
    },
    {
      "cve": "CVE-2023-32611",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-32681",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32681"
    },
    {
      "cve": "CVE-2023-32762",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32762"
    },
    {
      "cve": "CVE-2023-32763",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-32763"
    },
    {
      "cve": "CVE-2023-34241",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-34241"
    },
    {
      "cve": "CVE-2023-34969",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-36053",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-36053"
    },
    {
      "cve": "CVE-2023-36191",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-36191"
    },
    {
      "cve": "CVE-2023-3666",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-3666"
    },
    {
      "cve": "CVE-2023-36664",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-36664"
    },
    {
      "cve": "CVE-2023-37201",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-37201"
    },
    {
      "cve": "CVE-2023-37202",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-37202"
    },
    {
      "cve": "CVE-2023-37207",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-37207"
    },
    {
      "cve": "CVE-2023-37208",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-37208"
    },
    {
      "cve": "CVE-2023-37211",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-37211"
    },
    {
      "cve": "CVE-2023-3823",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-3823"
    },
    {
      "cve": "CVE-2023-3824",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-3824"
    },
    {
      "cve": "CVE-2023-38403",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-38403"
    },
    {
      "cve": "CVE-2023-4045",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4045"
    },
    {
      "cve": "CVE-2023-4046",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4046"
    },
    {
      "cve": "CVE-2023-4047",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4047"
    },
    {
      "cve": "CVE-2023-40477",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-40477"
    },
    {
      "cve": "CVE-2023-4048",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4048"
    },
    {
      "cve": "CVE-2023-4049",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4049"
    },
    {
      "cve": "CVE-2023-4050",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4050"
    },
    {
      "cve": "CVE-2023-4054",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4054"
    },
    {
      "cve": "CVE-2023-4055",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4055"
    },
    {
      "cve": "CVE-2023-4056",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4056"
    },
    {
      "cve": "CVE-2023-41080",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-41080"
    },
    {
      "cve": "CVE-2023-41081",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-41081"
    },
    {
      "cve": "CVE-2023-43622",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-43622"
    },
    {
      "cve": "CVE-2023-4504",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4504"
    },
    {
      "cve": "CVE-2023-4573",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4573"
    },
    {
      "cve": "CVE-2023-4574",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4574"
    },
    {
      "cve": "CVE-2023-4575",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4575"
    },
    {
      "cve": "CVE-2023-4576",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4576"
    },
    {
      "cve": "CVE-2023-45802",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-45802"
    },
    {
      "cve": "CVE-2023-4581",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4581"
    },
    {
      "cve": "CVE-2023-4584",
      "notes": [
        {
          "category": "description",
          "text": "In Xerox FreeFlow Print Server existieren mehrere Schwachstellen im Zusammenhang mit bekannten Schwachstellen in unter anderem OpenJDK, Apache und Mozilla Firefox. Ein Angreifer kann diese ausnutzen, um die Vertraulichkeit, Verf\u00fcgbarkeit und Integrit\u00e4t des Systems zu gef\u00e4hrden."
        }
      ],
      "product_status": {
        "known_affected": [
          "T028053",
          "T002207",
          "T015632",
          "T002977",
          "T015631",
          "T031383"
        ]
      },
      "release_date": "2023-11-14T23:00:00.000+00:00",
      "title": "CVE-2023-4584"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "mittel"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Node.js ist eine Plattform zur Entwicklung von Netzwerkanwendungen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, authentisierter Angreifer kann mehrere Schwachstellen in Node.js ausnutzen, um Sicherheitsvorkehrungen zu umgehen.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Linux\n- MacOS X\n- UNIX\n- Windows",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-2024 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-2024.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-2024 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-2024"
      },
      {
        "category": "external",
        "summary": "NodeJS Security Release vom 2023-08-09",
        "url": "https://nodejs.org/en/blog/vulnerability/august-2023-security-releases"
      },
      {
        "category": "external",
        "summary": "Fedora Security Advisory FEDORA-2023-18476ABD7E vom 2023-08-10",
        "url": "https://bodhi.fedoraproject.org/updates/FEDORA-2023-18476abd7e"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3306-1 vom 2023-08-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/015899.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3355-1 vom 2023-08-18",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/015960.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3356-1 vom 2023-08-18",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/015959.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3378-1 vom 2023-08-22",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/015991.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3379-1 vom 2023-08-22",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/015990.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3400-1 vom 2023-08-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/016008.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3408-1 vom 2023-08-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/016002.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:3455-1 vom 2023-08-28",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-August/016038.html"
      },
      {
        "category": "external",
        "summary": "Debian Security Advisory DSA-5589 vom 2023-12-28",
        "url": "https://lists.debian.org/debian-security-announce/2023/msg00286.html"
      },
      {
        "category": "external",
        "summary": "IBM Security Bulletin 7039262 vom 2023-09-26",
        "url": "https://www.ibm.com/support/pages/node/7039262"
      },
      {
        "category": "external",
        "summary": "Red Hat Security Advisory RHSA-2023:5363 vom 2023-09-26",
        "url": "https://access.redhat.com/errata/RHSA-2023:5363"
      },
      {
        "category": "external",
        "summary": "Red Hat Security Advisory RHSA-2023:5360 vom 2023-09-26",
        "url": "https://access.redhat.com/errata/RHSA-2023:5360"
      },
      {
        "category": "external",
        "summary": "Red Hat Security Advisory RHSA-2023:5362 vom 2023-09-26",
        "url": "https://access.redhat.com/errata/RHSA-2023:5362"
      },
      {
        "category": "external",
        "summary": "Red Hat Security Advisory RHSA-2023:5361 vom 2023-09-26",
        "url": "https://access.redhat.com/errata/RHSA-2023:5361"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2023-5363 vom 2023-09-28",
        "url": "http://linux.oracle.com/errata/ELSA-2023-5363.html"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2023-5360 vom 2023-09-28",
        "url": "https://linux.oracle.com/errata/ELSA-2023-5360.html"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2023-5362 vom 2023-09-28",
        "url": "http://linux.oracle.com/errata/ELSA-2023-5362.html"
      },
      {
        "category": "external",
        "summary": "Red Hat Security Advisory RHSA-2023:5533 vom 2023-10-09",
        "url": "https://access.redhat.com/errata/RHSA-2023:5533"
      },
      {
        "category": "external",
        "summary": "Red Hat Security Advisory RHSA-2023:5532 vom 2023-10-09",
        "url": "https://access.redhat.com/errata/RHSA-2023:5532"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2023-5532 vom 2023-10-10",
        "url": "https://linux.oracle.com/errata/ELSA-2023-5532.html"
      },
      {
        "category": "external",
        "summary": "XEROX Security Advisory XRX24-005 vom 2024-03-04",
        "url": "https://security.business.xerox.com/wp-content/uploads/2024/03/Xerox-Security-Bulletin-XRX24-005-Xerox-FreeFlow%C2%AE-Print-Server-v9_Feb-2024.pdf"
      },
      {
        "category": "external",
        "summary": "Gentoo Linux Security Advisory GLSA-202405-29 vom 2024-05-08",
        "url": "https://security.gentoo.org/glsa/202405-29"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6822-1 vom 2024-06-11",
        "url": "https://ubuntu.com/security/notices/USN-6822-1"
      },
      {
        "category": "external",
        "summary": "Debian Security Advisory DLA-3886 vom 2024-09-14",
        "url": "https://lists.debian.org/debian-lts-announce/2024/09/msg00029.html"
      }
    ],
    "source_lang": "en-US",
    "title": "Node.js: Mehrere Schwachstellen erm\u00f6glichen Umgehen von Sicherheitsvorkehrungen",
    "tracking": {
      "current_release_date": "2024-09-15T22:00:00.000+00:00",
      "generator": {
        "date": "2024-09-16T12:08:00.918+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.6"
        }
      },
      "id": "WID-SEC-W-2023-2024",
      "initial_release_date": "2023-08-09T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-08-09T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-08-10T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von Fedora aufgenommen"
        },
        {
          "date": "2023-08-14T22:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2023-08-20T22:00:00.000+00:00",
          "number": "4",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2023-08-22T22:00:00.000+00:00",
          "number": "5",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2023-08-23T22:00:00.000+00:00",
          "number": "6",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2023-08-28T22:00:00.000+00:00",
          "number": "7",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2023-09-25T22:00:00.000+00:00",
          "number": "8",
          "summary": "Neue Updates von IBM aufgenommen"
        },
        {
          "date": "2023-09-26T22:00:00.000+00:00",
          "number": "9",
          "summary": "Neue Updates von Red Hat aufgenommen"
        },
        {
          "date": "2023-09-27T22:00:00.000+00:00",
          "number": "10",
          "summary": "Neue Updates von Oracle Linux aufgenommen"
        },
        {
          "date": "2023-09-28T22:00:00.000+00:00",
          "number": "11",
          "summary": "Neue Updates von Oracle Linux aufgenommen"
        },
        {
          "date": "2023-10-09T22:00:00.000+00:00",
          "number": "12",
          "summary": "Neue Updates von Red Hat aufgenommen"
        },
        {
          "date": "2023-10-10T22:00:00.000+00:00",
          "number": "13",
          "summary": "Neue Updates von Oracle Linux aufgenommen"
        },
        {
          "date": "2023-12-27T23:00:00.000+00:00",
          "number": "14",
          "summary": "Neue Updates von Debian aufgenommen"
        },
        {
          "date": "2024-03-03T23:00:00.000+00:00",
          "number": "15",
          "summary": "Neue Updates von XEROX aufgenommen"
        },
        {
          "date": "2024-05-09T22:00:00.000+00:00",
          "number": "16",
          "summary": "Neue Updates von Gentoo aufgenommen"
        },
        {
          "date": "2024-06-10T22:00:00.000+00:00",
          "number": "17",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2024-09-15T22:00:00.000+00:00",
          "number": "18",
          "summary": "Neue Updates von Debian aufgenommen"
        }
      ],
      "status": "final",
      "version": "18"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Debian Linux",
            "product": {
              "name": "Debian Linux",
              "product_id": "2951",
              "product_identification_helper": {
                "cpe": "cpe:/o:debian:debian_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Debian"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Fedora Linux",
            "product": {
              "name": "Fedora Linux",
              "product_id": "74185",
              "product_identification_helper": {
                "cpe": "cpe:/o:fedoraproject:fedora:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Fedora"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Gentoo Linux",
            "product": {
              "name": "Gentoo Linux",
              "product_id": "T012167",
              "product_identification_helper": {
                "cpe": "cpe:/o:gentoo:linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Gentoo"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "IBM Business Automation Workflow",
            "product": {
              "name": "IBM Business Automation Workflow",
              "product_id": "T019704",
              "product_identification_helper": {
                "cpe": "cpe:/a:ibm:business_automation_workflow:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "IBM"
      },
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cv16.20.2 (LTS)",
                "product": {
                  "name": "Open Source Node.js \u003cv16.20.2 (LTS)",
                  "product_id": "T029223"
                }
              },
              {
                "category": "product_version",
                "name": "v16.20.2 (LTS)",
                "product": {
                  "name": "Open Source Node.js v16.20.2 (LTS)",
                  "product_id": "T029223-fixed",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:nodejs:nodejs:v"
                  }
                }
              },
              {
                "category": "product_version_range",
                "name": "\u003cv18.17.1 (LTS)",
                "product": {
                  "name": "Open Source Node.js \u003cv18.17.1 (LTS)",
                  "product_id": "T029224"
                }
              },
              {
                "category": "product_version",
                "name": "v18.17.1 (LTS)",
                "product": {
                  "name": "Open Source Node.js v18.17.1 (LTS)",
                  "product_id": "T029224-fixed",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:nodejs:nodejs:v"
                  }
                }
              },
              {
                "category": "product_version_range",
                "name": "\u003cv20.5.1 (Current)",
                "product": {
                  "name": "Open Source Node.js \u003cv20.5.1 (Current)",
                  "product_id": "T029225"
                }
              },
              {
                "category": "product_version",
                "name": "v20.5.1 (Current)",
                "product": {
                  "name": "Open Source Node.js v20.5.1 (Current)",
                  "product_id": "T029225-fixed",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:nodejs:nodejs:v"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "Node.js"
          }
        ],
        "category": "vendor",
        "name": "Open Source"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Oracle Linux",
            "product": {
              "name": "Oracle Linux",
              "product_id": "T004914",
              "product_identification_helper": {
                "cpe": "cpe:/o:oracle:linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Oracle"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Red Hat Enterprise Linux",
            "product": {
              "name": "Red Hat Enterprise Linux",
              "product_id": "67646",
              "product_identification_helper": {
                "cpe": "cpe:/o:redhat:enterprise_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "SUSE Linux",
            "product": {
              "name": "SUSE Linux",
              "product_id": "T002207",
              "product_identification_helper": {
                "cpe": "cpe:/o:suse:suse_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Ubuntu Linux",
            "product": {
              "name": "Ubuntu Linux",
              "product_id": "T000126",
              "product_identification_helper": {
                "cpe": "cpe:/o:canonical:ubuntu_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Ubuntu"
      },
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "v9",
                "product": {
                  "name": "Xerox FreeFlow Print Server v9",
                  "product_id": "T015632",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:xerox:freeflow_print_server:v9"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "FreeFlow Print Server"
          }
        ],
        "category": "vendor",
        "name": "Xerox"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-32002",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32002"
    },
    {
      "cve": "CVE-2023-32003",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32003"
    },
    {
      "cve": "CVE-2023-32004",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32004"
    },
    {
      "cve": "CVE-2023-32005",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32005"
    },
    {
      "cve": "CVE-2023-32006",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32006"
    },
    {
      "cve": "CVE-2023-32558",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32558"
    },
    {
      "cve": "CVE-2023-32559",
      "notes": [
        {
          "category": "description",
          "text": "In Node.js existieren mehrere Schwachstellen. Diese sind auf mehrere Fehler in Berechtigungsmodellen und Policies zur\u00fcckzuf\u00fchren. Ein entfernter, authentisierter Angreifer kann diese Schwachstelle ausnutzen, um Sicherheitsvorkehrungen zu umgehen."
        }
      ],
      "product_status": {
        "known_affected": [
          "2951",
          "T002207",
          "67646",
          "T000126",
          "T019704",
          "T015632",
          "T012167",
          "T004914",
          "T029225",
          "74185",
          "T029224",
          "T029223"
        ]
      },
      "release_date": "2023-08-09T22:00:00.000+00:00",
      "title": "CVE-2023-32559"
    }
  ]
}