Common Weakness Enumeration
CWE-125
AllowedOut-of-bounds Read
Abstraction: Base · Status: Draft
The product reads data past the end, or before the beginning, of the intended buffer.
11354 vulnerabilities reference this CWE, most recent first.
CVE-2020-1820 (GCVE-0-2020-1820)
Vulnerability from cvelistv5 – Published: 2024-12-28 06:11 – Updated: 2024-12-31 17:17
VLAI
EPSS
VEX
Summary
There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)
The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824.
Severity
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
1 reference
Impacted products
9 products
| Vendor | Product | Version | |
|---|---|---|---|
| Huawei | IPS Module |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NGFW Module |
Affected:
V500R002C00
Affected: V500R002C20 Affected: V500R005C00 |
|
| Huawei | NIP6300 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NIP6600 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NIP6800 |
Affected:
V500R001C60
Affected: V500R005C00 |
|
| Huawei | Secospace USG6300 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | Secospace USG6500 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | Secospace USG6600 |
Affected:
V500R001C30
Affected: V500R005C00 |
|
| Huawei | USG6000V |
Affected:
V500R003C00
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2020-1820",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-12-31T17:16:57.375041Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-12-31T17:17:05.860Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "IPS Module",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NGFW Module",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R002C00"
},
{
"status": "affected",
"version": "V500R002C20"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6300",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6600",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6800",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6300",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6500",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6600",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "USG6000V",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R003C00"
}
]
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eThere are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)\u003c/p\u003e\u003cp\u003eThe seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824.\u003c/p\u003e"
}
],
"value": "There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)\n\nThe seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 3.7,
"baseSeverity": "LOW",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-12-28T06:11:17.446Z",
"orgId": "25ac1063-e409-4190-8079-24548c77ea2e",
"shortName": "huawei"
},
"references": [
{
"url": "https://www.huawei.com/en/psirt/security-advisories/2020/huawei-sa-20191218-01-cops-en"
}
],
"source": {
"discovery": "UNKNOWN"
},
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "25ac1063-e409-4190-8079-24548c77ea2e",
"assignerShortName": "huawei",
"cveId": "CVE-2020-1820",
"datePublished": "2024-12-28T06:11:17.446Z",
"dateReserved": "2019-11-29T00:00:00.000Z",
"dateUpdated": "2024-12-31T17:17:05.860Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2020-1819 (GCVE-0-2020-1819)
Vulnerability from cvelistv5 – Published: 2024-12-27 10:05 – Updated: 2024-12-27 14:56
VLAI
EPSS
VEX
Summary
There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)
The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824.
Severity
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
1 reference
Impacted products
9 products
| Vendor | Product | Version | |
|---|---|---|---|
| Huawei | IPS Module |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NGFW Module |
Affected:
V500R002C00
Affected: V500R002C20 Affected: V500R005C00 |
|
| Huawei | NIP6300 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NIP6600 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NIP6800 |
Affected:
V500R001C60
Affected: V500R005C00 |
|
| Huawei | Secospace USG6300 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | Secospace USG6500 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | Secospace USG6600 |
Affected:
V500R001C30
Affected: V500R005C00 |
|
| Huawei | USG6000V |
Affected:
V500R003C00
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2020-1819",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-12-27T14:56:22.966063Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-12-27T14:56:31.845Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "IPS Module",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NGFW Module",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R002C00"
},
{
"status": "affected",
"version": "V500R002C20"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6300",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6600",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6800",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6300",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6500",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6600",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "USG6000V",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R003C00"
}
]
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eThere are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)\u003c/p\u003e\u003cp\u003eThe seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824.\u003c/p\u003e"
}
],
"value": "There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)\n\nThe seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 3.7,
"baseSeverity": "LOW",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-12-27T10:05:47.224Z",
"orgId": "25ac1063-e409-4190-8079-24548c77ea2e",
"shortName": "huawei"
},
"references": [
{
"url": "https://www.huawei.com/en/psirt/security-advisories/2020/huawei-sa-20191218-01-cops-en"
}
],
"source": {
"discovery": "UNKNOWN"
},
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "25ac1063-e409-4190-8079-24548c77ea2e",
"assignerShortName": "huawei",
"cveId": "CVE-2020-1819",
"datePublished": "2024-12-27T10:05:47.224Z",
"dateReserved": "2019-11-29T00:00:00.000Z",
"dateUpdated": "2024-12-27T14:56:31.845Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2020-1818 (GCVE-0-2020-1818)
Vulnerability from cvelistv5 – Published: 2024-12-27 10:02 – Updated: 2024-12-27 14:57
VLAI
EPSS
VEX
Summary
There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)
The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824.
Severity
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
1 reference
Impacted products
9 products
| Vendor | Product | Version | |
|---|---|---|---|
| Huawei | IPS Module |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NGFW Module |
Affected:
V500R002C00
Affected: V500R002C20 Affected: V500R005C00 |
|
| Huawei | NIP6300 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NIP6600 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | NIP6800 |
Affected:
V500R001C60
Affected: V500R005C00 |
|
| Huawei | Secospace USG6300 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | Secospace USG6500 |
Affected:
V500R001C30
Affected: V500R001C60 Affected: V500R005C00 |
|
| Huawei | Secospace USG6600 |
Affected:
V500R001C30
Affected: V500R005C00 |
|
| Huawei | USG6000V |
Affected:
V500R003C00
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2020-1818",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-12-27T14:56:47.972518Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-12-27T14:57:27.653Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "IPS Module",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NGFW Module",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R002C00"
},
{
"status": "affected",
"version": "V500R002C20"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6300",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6600",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "NIP6800",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6300",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6500",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R001C60"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Secospace USG6600",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R001C30"
},
{
"status": "affected",
"version": "V500R005C00"
}
]
},
{
"defaultStatus": "unaffected",
"product": "USG6000V",
"vendor": "Huawei",
"versions": [
{
"status": "affected",
"version": "V500R003C00"
}
]
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eThere are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)\u003c/p\u003e\u003cp\u003eThe seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824.\u003c/p\u003e"
}
],
"value": "There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289)\n\nThe seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 3.7,
"baseSeverity": "LOW",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-12-27T10:02:45.710Z",
"orgId": "25ac1063-e409-4190-8079-24548c77ea2e",
"shortName": "huawei"
},
"references": [
{
"url": "https://www.huawei.com/en/psirt/security-advisories/2020/huawei-sa-20191218-01-cops-en"
}
],
"source": {
"discovery": "UNKNOWN"
},
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "25ac1063-e409-4190-8079-24548c77ea2e",
"assignerShortName": "huawei",
"cveId": "CVE-2020-1818",
"datePublished": "2024-12-27T10:02:45.710Z",
"dateReserved": "2019-11-29T00:00:00.000Z",
"dateUpdated": "2024-12-27T14:57:27.653Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2020-1763 (GCVE-0-2020-1763)
Vulnerability from cvelistv5 – Published: 2020-05-12 13:41 – Updated: 2024-08-04 06:46
VLAI
EPSS
VEX
Summary
An out-of-bounds buffer read flaw was found in the pluto daemon of libreswan from versions 3.27 till 3.31 where, an unauthenticated attacker could use this flaw to crash libreswan by sending specially-crafted IKEv1 Informational Exchange packets. The daemon respawns after the crash.
Severity
7.5 (High)
CWE
Assigner
References
8 references
| URL | Tags |
|---|---|
| https://libreswan.org/security/CVE-2020-1763/CVE-… | x_refsource_CONFIRM |
| https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2… | x_refsource_CONFIRM |
| https://bugzilla.redhat.com/show_bug.cgi?id=1813329 | x_refsource_MISC |
| https://github.com/libreswan/libreswan/commit/471… | x_refsource_CONFIRM |
| https://www.debian.org/security/2020/dsa-4684 | vendor-advisoryx_refsource_DEBIAN |
| https://security.gentoo.org/glsa/202007-21 | vendor-advisoryx_refsource_GENTOO |
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_CONFIRM |
| https://us-cert.cisa.gov/ics/advisories/icsa-21-040-04 | x_refsource_MISC |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| the libreswan Project | libreswan |
Affected:
from versions 3.27 till 3.31
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-04T06:46:30.902Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://libreswan.org/security/CVE-2020-1763/CVE-2020-1763.txt"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1763"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1813329"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://github.com/libreswan/libreswan/commit/471a3e41a449d7c753bc4edbba4239501bb62ba8"
},
{
"name": "DSA-4684",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN",
"x_transferred"
],
"url": "https://www.debian.org/security/2020/dsa-4684"
},
{
"name": "GLSA-202007-21",
"tags": [
"vendor-advisory",
"x_refsource_GENTOO",
"x_transferred"
],
"url": "https://security.gentoo.org/glsa/202007-21"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-379803.pdf"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-040-04"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "libreswan",
"vendor": "the libreswan Project",
"versions": [
{
"status": "affected",
"version": "from versions 3.27 till 3.31"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "An out-of-bounds buffer read flaw was found in the pluto daemon of libreswan from versions 3.27 till 3.31 where, an unauthenticated attacker could use this flaw to crash libreswan by sending specially-crafted IKEv1 Informational Exchange packets. The daemon respawns after the crash."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2021-02-12T05:48:52.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://libreswan.org/security/CVE-2020-1763/CVE-2020-1763.txt"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1763"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1813329"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/libreswan/libreswan/commit/471a3e41a449d7c753bc4edbba4239501bb62ba8"
},
{
"name": "DSA-4684",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN"
],
"url": "https://www.debian.org/security/2020/dsa-4684"
},
{
"name": "GLSA-202007-21",
"tags": [
"vendor-advisory",
"x_refsource_GENTOO"
],
"url": "https://security.gentoo.org/glsa/202007-21"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-379803.pdf"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-040-04"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "secalert@redhat.com",
"ID": "CVE-2020-1763",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "libreswan",
"version": {
"version_data": [
{
"version_value": "from versions 3.27 till 3.31"
}
]
}
}
]
},
"vendor_name": "the libreswan Project"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "An out-of-bounds buffer read flaw was found in the pluto daemon of libreswan from versions 3.27 till 3.31 where, an unauthenticated attacker could use this flaw to crash libreswan by sending specially-crafted IKEv1 Informational Exchange packets. The daemon respawns after the crash."
}
]
},
"impact": {
"cvss": [
[
{
"vectorString": "7.5/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.0"
}
]
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-125"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://libreswan.org/security/CVE-2020-1763/CVE-2020-1763.txt",
"refsource": "CONFIRM",
"url": "https://libreswan.org/security/CVE-2020-1763/CVE-2020-1763.txt"
},
{
"name": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1763",
"refsource": "CONFIRM",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1763"
},
{
"name": "https://bugzilla.redhat.com/show_bug.cgi?id=1813329",
"refsource": "MISC",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1813329"
},
{
"name": "https://github.com/libreswan/libreswan/commit/471a3e41a449d7c753bc4edbba4239501bb62ba8",
"refsource": "CONFIRM",
"url": "https://github.com/libreswan/libreswan/commit/471a3e41a449d7c753bc4edbba4239501bb62ba8"
},
{
"name": "DSA-4684",
"refsource": "DEBIAN",
"url": "https://www.debian.org/security/2020/dsa-4684"
},
{
"name": "GLSA-202007-21",
"refsource": "GENTOO",
"url": "https://security.gentoo.org/glsa/202007-21"
},
{
"name": "https://cert-portal.siemens.com/productcert/pdf/ssa-379803.pdf",
"refsource": "CONFIRM",
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-379803.pdf"
},
{
"name": "https://us-cert.cisa.gov/ics/advisories/icsa-21-040-04",
"refsource": "MISC",
"url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-040-04"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2020-1763",
"datePublished": "2020-05-12T13:41:20.000Z",
"dateReserved": "2019-11-27T00:00:00.000Z",
"dateUpdated": "2024-08-04T06:46:30.902Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2020-1671 (GCVE-0-2020-1671)
Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-17 01:00
VLAI
EPSS
VEX
Title
Junos OS: Receipt of malformed DHCPv6 packets causes jdhcpd to crash.
Summary
On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue only affects DHCPv6, it does not affect DHCPv4. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.2 version 19.2R2 and later versions; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; This issue does not affect Juniper Networks Junos OS prior to 17.4R1.
Severity
7.5 (High)
CWE
Assigner
References
1 reference
| URL | Tags |
|---|---|
| https://kb.juniper.net/JSA11068 | x_refsource_CONFIRM |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| Juniper Networks | Junos OS |
Unaffected:
unspecified , < 17.4R1
(custom)
Affected: 17.4 , < 17.4R2-S12, 17.4R3-S3 (custom) Affected: 18.1 , < 18.1R3-S11 (custom) Affected: 18.2 , < 18.2R3-S6 (custom) Affected: 18.2X75 , < 18.2X75-D65 (custom) Affected: 18.3 , < 18.3R2-S4, 18.3R3-S3 (custom) Affected: 18.4 , < 18.4R2-S5, 18.4R3-S4 (custom) Affected: 19.1 , < 19.1R3-S2 (custom) Affected: 19.2 , < 19.2R1-S5, 19.2R3 (custom) Affected: 19.3 , < 19.3R2-S4, 19.3R3 (custom) Affected: 19.4 , < 19.4R1-S3, 19.4R2-S2, 19.4R3 (custom) Affected: 20.1 , < 20.1R1-S3, 20.1R2 (custom) |
Date Public
2020-10-14 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-04T06:46:29.907Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://kb.juniper.net/JSA11068"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "Junos OS",
"vendor": "Juniper Networks",
"versions": [
{
"lessThan": "17.4R1",
"status": "unaffected",
"version": "unspecified",
"versionType": "custom"
},
{
"lessThan": "17.4R2-S12, 17.4R3-S3",
"status": "affected",
"version": "17.4",
"versionType": "custom"
},
{
"lessThan": "18.1R3-S11",
"status": "affected",
"version": "18.1",
"versionType": "custom"
},
{
"lessThan": "18.2R3-S6",
"status": "affected",
"version": "18.2",
"versionType": "custom"
},
{
"lessThan": "18.2X75-D65",
"status": "affected",
"version": "18.2X75",
"versionType": "custom"
},
{
"lessThan": "18.3R2-S4, 18.3R3-S3",
"status": "affected",
"version": "18.3",
"versionType": "custom"
},
{
"lessThan": "18.4R2-S5, 18.4R3-S4",
"status": "affected",
"version": "18.4",
"versionType": "custom"
},
{
"lessThan": "19.1R3-S2",
"status": "affected",
"version": "19.1",
"versionType": "custom"
},
{
"changes": [
{
"at": "19.2R2",
"status": "affected"
}
],
"lessThan": "19.2R1-S5, 19.2R3",
"status": "affected",
"version": "19.2",
"versionType": "custom"
},
{
"lessThan": "19.3R2-S4, 19.3R3",
"status": "affected",
"version": "19.3",
"versionType": "custom"
},
{
"lessThan": "19.4R1-S3, 19.4R2-S2, 19.4R3",
"status": "affected",
"version": "19.4",
"versionType": "custom"
},
{
"lessThan": "20.1R1-S3, 20.1R2",
"status": "affected",
"version": "20.1",
"versionType": "custom"
}
]
}
],
"configurations": [
{
"lang": "en",
"value": "The example of DHCPv6 local server configuration stanza affected by this issue is:\n [system services dhcp-local-server dhcpv6]\n\nThe example of configuration stanza for DHCPv6 Relay Agent affected by this issue is: \n [forwarding-options dhcp-relay dhcpv6]"
}
],
"datePublic": "2020-10-14T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue only affects DHCPv6, it does not affect DHCPv4. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.2 version 19.2R2 and later versions; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; This issue does not affect Juniper Networks Junos OS prior to 17.4R1."
}
],
"exploits": [
{
"lang": "en",
"value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-119",
"description": "CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2020-10-16T20:31:30.000Z",
"orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
"shortName": "juniper"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://kb.juniper.net/JSA11068"
}
],
"solutions": [
{
"lang": "en",
"value": "The following software releases have been updated to resolve this specific issue: Junos OS 17.4R2-S12, 17.4R3-S3, 18.1R3-S11, 18.2R3-S6, 18.2X75-D65, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R3-S2, 19.2R1-S5, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S2, 19.4R3, 20.1R1-S3, 20.1R2, 20.2R1 and all subsequent releases."
}
],
"source": {
"advisory": "JSA11068",
"defect": [
"1511782"
],
"discovery": "USER"
},
"title": "Junos OS: Receipt of malformed DHCPv6 packets causes jdhcpd to crash.",
"workarounds": [
{
"lang": "en",
"value": "There are no viable workarounds for this issue."
}
],
"x_generator": {
"engine": "Vulnogram 0.0.9"
},
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "sirt@juniper.net",
"DATE_PUBLIC": "2020-10-14T07:00:00.000Z",
"ID": "CVE-2020-1671",
"STATE": "PUBLIC",
"TITLE": "Junos OS: Receipt of malformed DHCPv6 packets causes jdhcpd to crash."
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Junos OS",
"version": {
"version_data": [
{
"version_affected": "\u003c",
"version_name": "17.4",
"version_value": "17.4R2-S12, 17.4R3-S3"
},
{
"version_affected": "\u003c",
"version_name": "18.1",
"version_value": "18.1R3-S11"
},
{
"version_affected": "\u003c",
"version_name": "18.2",
"version_value": "18.2R3-S6"
},
{
"version_affected": "\u003c",
"version_name": "18.2X75",
"version_value": "18.2X75-D65"
},
{
"version_affected": "\u003c",
"version_name": "18.3",
"version_value": "18.3R2-S4, 18.3R3-S3"
},
{
"version_affected": "\u003c",
"version_name": "18.4",
"version_value": "18.4R2-S5, 18.4R3-S4"
},
{
"version_affected": "\u003c",
"version_name": "19.1",
"version_value": "19.1R3-S2"
},
{
"version_affected": "\u003c",
"version_name": "19.2",
"version_value": "19.2R1-S5, 19.2R3"
},
{
"version_affected": "\u003e=",
"version_name": "19.2",
"version_value": "19.2R2"
},
{
"version_affected": "\u003c",
"version_name": "19.3",
"version_value": "19.3R2-S4, 19.3R3"
},
{
"version_affected": "\u003c",
"version_name": "19.4",
"version_value": "19.4R1-S3, 19.4R2-S2, 19.4R3"
},
{
"version_affected": "\u003c",
"version_name": "20.1",
"version_value": "20.1R1-S3, 20.1R2"
},
{
"version_affected": "!\u003c",
"version_value": "17.4R1"
}
]
}
}
]
},
"vendor_name": "Juniper Networks"
}
]
}
},
"configuration": [
{
"lang": "en",
"value": "The example of DHCPv6 local server configuration stanza affected by this issue is:\n [system services dhcp-local-server dhcpv6]\n\nThe example of configuration stanza for DHCPv6 Relay Agent affected by this issue is: \n [forwarding-options dhcp-relay dhcpv6]"
}
],
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue only affects DHCPv6, it does not affect DHCPv4. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.2 version 19.2R2 and later versions; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; This issue does not affect Juniper Networks Junos OS prior to 17.4R1."
}
]
},
"exploit": [
{
"lang": "en",
"value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
}
],
"generator": {
"engine": "Vulnogram 0.0.9"
},
"impact": {
"cvss": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer"
}
]
},
{
"description": [
{
"lang": "eng",
"value": "CWE-125 Out-of-bounds Read"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://kb.juniper.net/JSA11068",
"refsource": "CONFIRM",
"url": "https://kb.juniper.net/JSA11068"
}
]
},
"solution": [
{
"lang": "en",
"value": "The following software releases have been updated to resolve this specific issue: Junos OS 17.4R2-S12, 17.4R3-S3, 18.1R3-S11, 18.2R3-S6, 18.2X75-D65, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R3-S2, 19.2R1-S5, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S2, 19.4R3, 20.1R1-S3, 20.1R2, 20.2R1 and all subsequent releases."
}
],
"source": {
"advisory": "JSA11068",
"defect": [
"1511782"
],
"discovery": "USER"
},
"work_around": [
{
"lang": "en",
"value": "There are no viable workarounds for this issue."
}
]
}
}
},
"cveMetadata": {
"assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
"assignerShortName": "juniper",
"cveId": "CVE-2020-1671",
"datePublished": "2020-10-16T20:31:30.432Z",
"dateReserved": "2019-11-04T00:00:00.000Z",
"dateUpdated": "2024-09-17T01:00:53.408Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2019-18307 (GCVE-0-2019-18307)
Vulnerability from cvelistv5 – Published: 2019-12-12 19:08 – Updated: 2024-08-05 01:47
VLAI
EPSS
VEX
Summary
A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18306. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
Severity
No CVSS data available.
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
2 references
| URL | Tags |
|---|---|
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_MISC |
| http://packetstormsecurity.com/files/155665/Sieme… | x_refsource_MISC |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| Siemens | SPPA-T3000 MS3000 Migration Server |
Affected:
All versions
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T01:47:14.140Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "SPPA-T3000 MS3000 Migration Server",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18306. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125: Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2022-02-22T17:51:51.000Z",
"orgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"shortName": "siemens"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "productcert@siemens.com",
"ID": "CVE-2019-18307",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "SPPA-T3000 MS3000 Migration Server",
"version": {
"version_data": [
{
"version_value": "All versions"
}
]
}
}
]
},
"vendor_name": "Siemens"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18306. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-125: Out-of-bounds Read"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf",
"refsource": "MISC",
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"name": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html",
"refsource": "MISC",
"url": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"assignerShortName": "siemens",
"cveId": "CVE-2019-18307",
"datePublished": "2019-12-12T19:08:48.000Z",
"dateReserved": "2019-10-23T00:00:00.000Z",
"dateUpdated": "2024-08-05T01:47:14.140Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2019-18306 (GCVE-0-2019-18306)
Vulnerability from cvelistv5 – Published: 2019-12-12 19:08 – Updated: 2024-08-05 01:47
VLAI
EPSS
VEX
Summary
A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
Severity
No CVSS data available.
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
2 references
| URL | Tags |
|---|---|
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_MISC |
| http://packetstormsecurity.com/files/155665/Sieme… | x_refsource_MISC |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| Siemens | SPPA-T3000 MS3000 Migration Server |
Affected:
All versions
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T01:47:14.163Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "SPPA-T3000 MS3000 Migration Server",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125: Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2022-02-22T17:51:49.000Z",
"orgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"shortName": "siemens"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "productcert@siemens.com",
"ID": "CVE-2019-18306",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "SPPA-T3000 MS3000 Migration Server",
"version": {
"version_data": [
{
"version_value": "All versions"
}
]
}
}
]
},
"vendor_name": "Siemens"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-125: Out-of-bounds Read"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf",
"refsource": "MISC",
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"name": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html",
"refsource": "MISC",
"url": "http://packetstormsecurity.com/files/155665/Siemens-Security-Advisory-SPPA-T3000-Code-Execution.html"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"assignerShortName": "siemens",
"cveId": "CVE-2019-18306",
"datePublished": "2019-12-12T19:08:47.000Z",
"dateReserved": "2019-10-23T00:00:00.000Z",
"dateUpdated": "2024-08-05T01:47:14.163Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2019-17138 (GCVE-0-2019-17138)
Vulnerability from cvelistv5 – Published: 2019-10-25 18:14 – Updated: 2024-08-05 01:33
VLAI
EPSS
VEX
Summary
This vulnerability allows remote attackers to disclose sensitive information on affected installations of Foxit Studio Photo 3.6.6.909. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion from JPEG to EPS. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-8809.
Severity
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
2 references
| URL | Tags |
|---|---|
| https://www.foxitsoftware.com/support/security-bu… | x_refsource_MISC |
| https://www.zerodayinitiative.com/advisories/ZDI-… | x_refsource_MISC |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| Foxit | Studio Photo |
Affected:
3.6.6.909
|
Credits
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T01:33:17.294Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://www.foxitsoftware.com/support/security-bulletins.php"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://www.zerodayinitiative.com/advisories/ZDI-19-908/"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "Studio Photo",
"vendor": "Foxit",
"versions": [
{
"status": "affected",
"version": "3.6.6.909"
}
]
}
],
"credits": [
{
"lang": "en",
"value": "Steven Seeley (mr_me) of Source Incite"
}
],
"descriptions": [
{
"lang": "en",
"value": "This vulnerability allows remote attackers to disclose sensitive information on affected installations of Foxit Studio Photo 3.6.6.909. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion from JPEG to EPS. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-8809."
}
],
"metrics": [
{
"cvssV3_0": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 3.3,
"baseSeverity": "LOW",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "REQUIRED",
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:N",
"version": "3.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125: Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2019-10-25T18:14:18.000Z",
"orgId": "99f1926a-a320-47d8-bbb5-42feb611262e",
"shortName": "zdi"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://www.foxitsoftware.com/support/security-bulletins.php"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "https://www.zerodayinitiative.com/advisories/ZDI-19-908/"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "zdi-disclosures@trendmicro.com",
"ID": "CVE-2019-17138",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Studio Photo",
"version": {
"version_data": [
{
"version_value": "3.6.6.909"
}
]
}
}
]
},
"vendor_name": "Foxit"
}
]
}
},
"credit": "Steven Seeley (mr_me) of Source Incite",
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "This vulnerability allows remote attackers to disclose sensitive information on affected installations of Foxit Studio Photo 3.6.6.909. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion from JPEG to EPS. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-8809."
}
]
},
"impact": {
"cvss": {
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:N",
"version": "3.0"
}
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-125: Out-of-bounds Read"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://www.foxitsoftware.com/support/security-bulletins.php",
"refsource": "MISC",
"url": "https://www.foxitsoftware.com/support/security-bulletins.php"
},
{
"name": "https://www.zerodayinitiative.com/advisories/ZDI-19-908/",
"refsource": "MISC",
"url": "https://www.zerodayinitiative.com/advisories/ZDI-19-908/"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "99f1926a-a320-47d8-bbb5-42feb611262e",
"assignerShortName": "zdi",
"cveId": "CVE-2019-17138",
"datePublished": "2019-10-25T18:14:18.000Z",
"dateReserved": "2019-10-04T00:00:00.000Z",
"dateUpdated": "2024-08-05T01:33:17.294Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2019-17136 (GCVE-0-2019-17136)
Vulnerability from cvelistv5 – Published: 2020-02-07 23:35 – Updated: 2024-08-05 01:33
VLAI
EPSS
VEX
Summary
This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 9.5.0.20723. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion of DXF files to PDF. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-8776.
Severity
7.8 (High)
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
1 reference
| URL | Tags |
|---|---|
| https://www.zerodayinitiative.com/advisories/ZDI-… | x_refsource_MISC |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| Foxit | PhantomPDF |
Affected:
9.5.0.20723
|
Credits
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T01:33:17.282Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://www.zerodayinitiative.com/advisories/ZDI-19-861/"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "PhantomPDF",
"vendor": "Foxit",
"versions": [
{
"status": "affected",
"version": "9.5.0.20723"
}
]
}
],
"credits": [
{
"lang": "en",
"value": "Mat Powell of Trend Micro Zero Day Initiative"
}
],
"descriptions": [
{
"lang": "en",
"value": "This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 9.5.0.20723. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion of DXF files to PDF. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-8776."
}
],
"metrics": [
{
"cvssV3_0": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "REQUIRED",
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
"version": "3.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125: Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2020-02-07T23:35:17.000Z",
"orgId": "99f1926a-a320-47d8-bbb5-42feb611262e",
"shortName": "zdi"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://www.zerodayinitiative.com/advisories/ZDI-19-861/"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "zdi-disclosures@trendmicro.com",
"ID": "CVE-2019-17136",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "PhantomPDF",
"version": {
"version_data": [
{
"version_value": "9.5.0.20723"
}
]
}
}
]
},
"vendor_name": "Foxit"
}
]
}
},
"credit": "Mat Powell of Trend Micro Zero Day Initiative",
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 9.5.0.20723. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion of DXF files to PDF. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-8776."
}
]
},
"impact": {
"cvss": {
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
"version": "3.0"
}
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-125: Out-of-bounds Read"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://www.zerodayinitiative.com/advisories/ZDI-19-861/",
"refsource": "MISC",
"url": "https://www.zerodayinitiative.com/advisories/ZDI-19-861/"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "99f1926a-a320-47d8-bbb5-42feb611262e",
"assignerShortName": "zdi",
"cveId": "CVE-2019-17136",
"datePublished": "2020-02-07T23:35:17.000Z",
"dateReserved": "2019-10-04T00:00:00.000Z",
"dateUpdated": "2024-08-05T01:33:17.282Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2019-15682 (GCVE-0-2019-15682)
Vulnerability from cvelistv5 – Published: 2019-10-30 15:42 – Updated: 2024-08-05 00:56
VLAI
EPSS
VEX
Summary
RDesktop version 1.8.4 contains multiple out-of-bound access read vulnerabilities in its code, which results in a denial of service (DoS) condition. This attack appear to be exploitable via network connectivity. These issues have been fixed in version 1.8.5
Severity
No CVSS data available.
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
1 reference
| URL | Tags |
|---|---|
| https://ics-cert.kaspersky.com/advisories/klcert-… | x_refsource_MISC |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T00:56:21.899Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://ics-cert.kaspersky.com/advisories/klcert-advisories/2019/10/30/klcert-19-032-denial-of-service-in-rdesktop-before-1-8-4/"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "RDesktop",
"vendor": "RDesktop",
"versions": [
{
"status": "affected",
"version": "1.8.4"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "RDesktop version 1.8.4 contains multiple out-of-bound access read vulnerabilities in its code, which results in a denial of service (DoS) condition. This attack appear to be exploitable via network connectivity. These issues have been fixed in version 1.8.5"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125: Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2019-10-30T15:42:18.000Z",
"orgId": "e45d732a-8f6b-4b6b-be76-7420f6a2b988",
"shortName": "Kaspersky"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://ics-cert.kaspersky.com/advisories/klcert-advisories/2019/10/30/klcert-19-032-denial-of-service-in-rdesktop-before-1-8-4/"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "vulnerability@kaspersky.com",
"ID": "CVE-2019-15682",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "RDesktop",
"version": {
"version_data": [
{
"version_value": "1.8.4"
}
]
}
}
]
},
"vendor_name": "RDesktop"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "RDesktop version 1.8.4 contains multiple out-of-bound access read vulnerabilities in its code, which results in a denial of service (DoS) condition. This attack appear to be exploitable via network connectivity. These issues have been fixed in version 1.8.5"
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-125: Out-of-bounds Read"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://ics-cert.kaspersky.com/advisories/klcert-advisories/2019/10/30/klcert-19-032-denial-of-service-in-rdesktop-before-1-8-4/",
"refsource": "MISC",
"url": "https://ics-cert.kaspersky.com/advisories/klcert-advisories/2019/10/30/klcert-19-032-denial-of-service-in-rdesktop-before-1-8-4/"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "e45d732a-8f6b-4b6b-be76-7420f6a2b988",
"assignerShortName": "Kaspersky",
"cveId": "CVE-2019-15682",
"datePublished": "2019-10-30T15:42:18.000Z",
"dateReserved": "2019-08-27T00:00:00.000Z",
"dateUpdated": "2024-08-05T00:56:21.899Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
Mitigation MIT-5
Implementation
Strategy: Input Validation
- Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, "boat" may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as "red" or "blue."
- Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code's environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright.
- To reduce the likelihood of introducing an out-of-bounds read, ensure that you validate and ensure correct calculations for any length argument, buffer size calculation, or offset. Be especially careful of relying on a sentinel (i.e. special character such as NUL) in untrusted inputs.
Mitigation
Architecture and Design
Strategy: Language Selection
Use a language that provides appropriate memory abstractions.
CAPEC-540: Overread Buffers
An adversary attacks a target by providing input that causes an application to read beyond the boundary of a defined buffer. This typically occurs when a value influencing where to start or stop reading is set to reflect positions outside of the valid memory location of the buffer. This type of attack may result in exposure of sensitive information, a system crash, or arbitrary code execution.