FKIE_CVE-2026-80795
Vulnerability from fkie_nvd - Published: 2026-09-04 16:18 - Updated: 2026-09-04 16:18
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target().
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/nfc/nci/ntf.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "0dc59de0075f88404a0f4a2b5233104ef459fbb2",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "94530ffabfca57e9bff1d207106010014cc84032",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "afd8605fb43becb892311102844955c3b127fc7e",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "24761d3a5f692df5f7d848caeabcb2afd10917aa",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "50e87e1c0e18d791dcd7dccf30f9a2f3e2cf3951",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "2f08dbce3b37624ec6b424d759336a99586170ec",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "d7083f41c21b30582e91b2e6de4d54dce74f6f9c",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "129032c0616d83a5e3e304f6ebf88f14ba01e5f7",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
},
{
"lessThan": "ac200079db50af81e6b04d058b33ec92901d8edd",
"status": "affected",
"version": "019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/nfc/nci/ntf.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.4"
},
{
"lessThan": "3.4",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.267",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.218",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.185",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.154",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.106",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.47",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.1",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3-rc1",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnfc: nci: fix out-of-bounds write in nci_target_auto_activated()\n\nnci_target_auto_activated() appends a target to the fixed-size array\nndev-\u003etargets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev-\u003en_targets\nwithout first checking the array is full; unlike its sibling\nnci_add_new_target(), which bails out when n_targets already equals\nNCI_MAX_DISCOVERED_TARGETS.\n\nndev-\u003en_targets is only cleared by nci_clear_target_list(), so an NFCC\nthat repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters\nNCI_DISCOVERY without clearing the target list) and reports an\nauto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the\nlimit. The append then writes a struct nfc_target past the end of the\narray (a slab out-of-bounds write), and nfc_targets_found() goes on to\nwalk the array with the inflated count:\n\n BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]\n Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12\n Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]\n Call trace:\n nci_add_new_protocol+0x94/0x2ac [nci]\n nci_ntf_packet+0xddc/0x11a0 [nci]\n nci_rx_work+0x15c/0x1e0 [nci]\n process_one_work+0x2dc/0x500\n worker_thread+0x240/0x460\n kthread+0x1c0/0x1d0\n ret_from_fork+0x10/0x20\n\n The buggy address belongs to the cache kmalloc-2k of size 2048\n The buggy address is located 1024 bytes to the right of\n allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)\n\nGuard nci_target_auto_activated() with the same check used by\nnci_add_new_target()."
}
],
"id": "CVE-2026-80795",
"lastModified": "2026-09-04T16:18:06.020",
"metrics": {},
"published": "2026-09-04T16:18:06.020",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/0dc59de0075f88404a0f4a2b5233104ef459fbb2"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/129032c0616d83a5e3e304f6ebf88f14ba01e5f7"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/24761d3a5f692df5f7d848caeabcb2afd10917aa"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/2f08dbce3b37624ec6b424d759336a99586170ec"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/50e87e1c0e18d791dcd7dccf30f9a2f3e2cf3951"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/94530ffabfca57e9bff1d207106010014cc84032"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/ac200079db50af81e6b04d058b33ec92901d8edd"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/afd8605fb43becb892311102844955c3b127fc7e"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/d7083f41c21b30582e91b2e6de4d54dce74f6f9c"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…