FKIE_CVE-2026-46114

Vulnerability from fkie_nvd - Published: 2026-05-28 10:16 - Updated: 2026-06-24 17:00
Summary
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero.
Impacted products

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/infiniband/sw/rxe/rxe_resp.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "539cabb7b2d8ba70f55bba91db55faef11c2a6d7",
              "status": "affected",
              "version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
              "versionType": "git"
            },
            {
              "lessThan": "d415fce3fcde6d7aeea6c25362a395b905811452",
              "status": "affected",
              "version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
              "versionType": "git"
            },
            {
              "lessThan": "105bf79a23b85cf3a761d18a4f3e10ce88526bc1",
              "status": "affected",
              "version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
              "versionType": "git"
            },
            {
              "lessThan": "7ec1ed4747f5f99f8b797bb438c5efd36079fad5",
              "status": "affected",
              "version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
              "versionType": "git"
            },
            {
              "lessThan": "1114c87aa6f195cf07da55a27b2122ae26557b26",
              "status": "affected",
              "version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/infiniband/sw/rxe/rxe_resp.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.2"
            },
            {
              "lessThan": "6.2",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.140",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.88",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.30",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.0.*",
              "status": "unaffected",
              "version": "7.0.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "A1A92866-F406-43B5-B2D1-CFC274753E9D",
              "versionEndExcluding": "6.6.140",
              "versionStartIncluding": "6.2",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "5AFBE0EC-CCDF-4207-AE92-ABF958125CA4",
              "versionEndExcluding": "6.12.88",
              "versionStartIncluding": "6.7",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "BF39AE08-AE6D-4410-8FBE-76F6BF5BF55B",
              "versionEndExcluding": "6.18.30",
              "versionStartIncluding": "6.13",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "D0893CA7-9AE6-4DFE-AC75-48967D73AD8E",
              "versionEndExcluding": "7.0.7",
              "versionStartIncluding": "6.19",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "0D38F0BF-A728-4133-A358-D44A2F7EE6D6",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nRDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads\n\natomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c\nunconditionally dereferences 8 bytes at payload_addr(pkt):\n\n    value = *(u64 *)payload_addr(pkt);\n\ncheck_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==\nresid == 0 because the length validation only compared pktlen against\nresid. A remote initiator that sets the RETH length to 0 therefore reaches\natomic_write_reply() with a zero-byte logical payload, and the responder\nreads sizeof(u64) bytes from past the logical end of the packet into\nskb-\u003ehead tailroom, then writes those 8 bytes into the attacker\u0027s MR via\nrxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel\ntailroom per probe (the other 4 bytes are the packet\u0027s own trailing ICRC).\n\nIBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is\nprotocol-invalid. Hoist a strict length check into check_rkey() so the\nresponder never reaches the unchecked dereference, and keep the existing\nWRITE-family length logic for the normal RDMA WRITE path.\n\nReproduced on mainline with an unmodified rxe driver: a sustained\nzero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer\nbytes into the attacker\u0027s MR, including recognisable kernel strings and\npartial kernel-direct-map pointer words.  With this patch applied the\nresponder rejects the PDU and the MR stays all-zero."
    }
  ],
  "id": "CVE-2026-46114",
  "lastModified": "2026-06-24T17:00:11.027",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "NONE",
          "baseScore": 7.5,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "NONE",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
          "version": "3.1"
        },
        "exploitabilityScore": 3.9,
        "impactScore": 3.6,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ]
  },
  "published": "2026-05-28T10:16:26.870",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/105bf79a23b85cf3a761d18a4f3e10ce88526bc1"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/1114c87aa6f195cf07da55a27b2122ae26557b26"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/539cabb7b2d8ba70f55bba91db55faef11c2a6d7"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/7ec1ed4747f5f99f8b797bb438c5efd36079fad5"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/d415fce3fcde6d7aeea6c25362a395b905811452"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Undergoing Analysis",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-476"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…