GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

FKIE_CVE-2026-16148

Vulnerability from fkie_nvd - Published: 2026-09-14 20:16 - Updated: 2026-09-14 21:10
Severity
4.6 (Medium) - CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Summary
The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue. k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic. An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated. The fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item.
References
vulnerabilities@zephyrproject.orghttps://github.com/zephyrproject-rtos/zephyr/commit/350fd5dfd49e6aca99724fb3f0d4998fe28b4b6c
vulnerabilities@zephyrproject.orghttps://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fvp9-j2pq-477x
Impacted products
Vendor Product Version
To clipboard 

{
  "affected": [
    {
      "affectedData": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "drivers/usb/udc/udc_it82xx2.c"
          ],
          "programRoutines": [
            {
              "name": "it82xx2_enable"
            }
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.4.2",
              "status": "affected",
              "version": "3.7.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "source": "vulnerabilities@zephyrproject.org"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(\u0026priv-\u003esuspended_work, suspended_handler) inside it82xx2_enable() (the driver\u0027s .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue.\n\nk_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api-\u003eenable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic.\n\nAn external USB host \u2014 for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration \u2014 drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated.\n\nThe fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item."
    }
  ],
  "id": "CVE-2026-16148",
  "lastModified": "2026-09-14T21:10:41.650",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "PHYSICAL",
          "availabilityImpact": "HIGH",
          "baseScore": 4.6,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 0.9,
        "impactScore": 3.6,
        "source": "vulnerabilities@zephyrproject.org",
        "type": "Secondary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-16148",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2026-09-14T20:06:24.030736Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2026-09-14T20:16:39.360",
  "references": [
    {
      "source": "vulnerabilities@zephyrproject.org",
      "url": "https://github.com/zephyrproject-rtos/zephyr/commit/350fd5dfd49e6aca99724fb3f0d4998fe28b4b6c"
    },
    {
      "source": "vulnerabilities@zephyrproject.org",
      "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fvp9-j2pq-477x"
    }
  ],
  "sourceIdentifier": "vulnerabilities@zephyrproject.org",
  "vulnStatus": "Awaiting Analysis",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-666"
        }
      ],
      "source": "vulnerabilities@zephyrproject.org",
      "type": "Secondary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.