FKIE_CVE-2024-50078
Vulnerability from fkie_nvd - Published: 2024-10-29 01:15 - Updated: 2026-08-04 11:21
Severity
7.8 (High) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
5.5 (Medium) - CVSS:3.1/
5.5 (Medium) - CVSS:3.1/
Summary
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Call iso_exit() on module unload
If iso_init() has been called, iso_exit() must be called on module
unload. Without that, the struct proto that iso_init() registered with
proto_register() becomes invalid, which could cause unpredictable
problems later. In my case, with CONFIG_LIST_HARDENED and
CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually
triggers this BUG():
list_add corruption. next->prev should be prev (ffffffffb5355fd0),
but was 0000000000000068. (next=ffffffffc0a010d0).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x61/0xa0
...
__list_add_valid_or_report+0x61/0xa0
proto_register+0x299/0x320
hci_sock_init+0x16/0xc0 [bluetooth]
bt_init+0x68/0xd0 [bluetooth]
__pfx_bt_init+0x10/0x10 [bluetooth]
do_one_initcall+0x80/0x2f0
do_init_module+0x8b/0x230
__do_sys_init_module+0x15f/0x190
do_syscall_64+0x68/0x110
...
References
Impacted products
| Vendor | Product | Version | |
|---|---|---|---|
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | 6.12 | |
| linux | linux_kernel | 6.12 | |
| linux | linux_kernel | 6.12 |
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/bluetooth/af_bluetooth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "4af7ba39a1a02e16ee8cd0d3b6c6657f51b8ad7a",
"status": "affected",
"version": "ccf74f2390d60a2f9a75ef496d2564abb478f46a",
"versionType": "git"
},
{
"lessThan": "05f84d86169b2ebac185c5736a256823d42c425b",
"status": "affected",
"version": "ccf74f2390d60a2f9a75ef496d2564abb478f46a",
"versionType": "git"
},
{
"lessThan": "f905a7d95091e0d2605a3a1a157a9351f09ab2e1",
"status": "affected",
"version": "ccf74f2390d60a2f9a75ef496d2564abb478f46a",
"versionType": "git"
},
{
"lessThan": "d458cd1221e9e56da3b2cc5518ad3225caa91f20",
"status": "affected",
"version": "ccf74f2390d60a2f9a75ef496d2564abb478f46a",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/bluetooth/af_bluetooth.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.0"
},
{
"lessThan": "6.0",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.114",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.58",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.11.*",
"status": "unaffected",
"version": "6.11.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.12",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "F8F22EB2-8271-4658-AAD7-36966F3C1A73",
"versionEndExcluding": "6.1.114",
"versionStartIncluding": "6.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "6B9489BC-825E-4EEE-8D93-F93C801988C8",
"versionEndExcluding": "6.6.58",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "6E62D61A-F704-44DB-A311-17B7534DA7BC",
"versionEndExcluding": "6.11.5",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc1:*:*:*:*:*:*",
"matchCriteriaId": "7F361E1D-580F-4A2D-A509-7615F73167A1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc2:*:*:*:*:*:*",
"matchCriteriaId": "925478D0-3E3D-4E6F-ACD5-09F28D5DF82C",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc3:*:*:*:*:*:*",
"matchCriteriaId": "3C95E234-D335-4B6C-96BF-E2CEBD8654ED",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nBluetooth: Call iso_exit() on module unload\n\nIf iso_init() has been called, iso_exit() must be called on module\nunload. Without that, the struct proto that iso_init() registered with\nproto_register() becomes invalid, which could cause unpredictable\nproblems later. In my case, with CONFIG_LIST_HARDENED and\nCONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually\ntriggers this BUG():\n\n list_add corruption. next-\u003eprev should be prev (ffffffffb5355fd0),\n but was 0000000000000068. (next=ffffffffc0a010d0).\n ------------[ cut here ]------------\n kernel BUG at lib/list_debug.c:29!\n Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI\n CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1\n RIP: 0010:__list_add_valid_or_report+0x61/0xa0\n ...\n __list_add_valid_or_report+0x61/0xa0\n proto_register+0x299/0x320\n hci_sock_init+0x16/0xc0 [bluetooth]\n bt_init+0x68/0xd0 [bluetooth]\n __pfx_bt_init+0x10/0x10 [bluetooth]\n do_one_initcall+0x80/0x2f0\n do_init_module+0x8b/0x230\n __do_sys_init_module+0x15f/0x190\n do_syscall_64+0x68/0x110\n ..."
},
{
"lang": "es",
"value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: Bluetooth: Llamada a iso_exit() en la descarga del m\u00f3dulo Si se ha llamado a iso_init(), se debe llamar a iso_exit() en la descarga del m\u00f3dulo. Sin eso, el struct proto que iso_init() registr\u00f3 con proto_register() se vuelve inv\u00e1lido, lo que podr\u00eda causar problemas impredecibles m\u00e1s adelante. En mi caso, con CONFIG_LIST_HARDENED y CONFIG_BUG_ON_DATA_CORRUPTION habilitados, cargar el m\u00f3dulo nuevamente generalmente desencadena este BUG(): corrupci\u00f3n de list_add. next-\u0026gt;prev deber\u00eda ser prev (ffffffffb5355fd0), pero era 0000000000000068. (next=ffffffffc0a010d0). ------------[ cortar aqu\u00ed ]------------ \u00a1ERROR del kernel en lib/list_debug.c:29! Ups: c\u00f3digo de operaci\u00f3n no v\u00e1lido: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4159 Comm: modprobe No contaminado 6.10.11-4+bt2-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x61/0xa0 ... __list_add_valid_or_report+0x61/0xa0 proto_register+0x299/0x320 hci_sock_init+0x16/0xc0 [bluetooth] bt_init+0x68/0xd0 [bluetooth] __pfx_bt_init+0x10/0x10 [bluetooth] do_one_initcall+0x80/0x2f0 do_init_module+0x8b/0x230 __do_sys_init_module+0x15f/0x190 hacer_llamada_al_sistema_64+0x68/0x110 ..."
}
],
"id": "CVE-2024-50078",
"lastModified": "2026-08-04T11:21:16.023",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
},
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 3.6,
"source": "nvd@nist.gov",
"type": "Primary"
},
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 3.6,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2024-50078",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2025-10-01T20:23:25.456239Z",
"version": "2.0.3"
}
}
]
},
"published": "2024-10-29T01:15:04.853",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/05f84d86169b2ebac185c5736a256823d42c425b"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/4af7ba39a1a02e16ee8cd0d3b6c6657f51b8ad7a"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/d458cd1221e9e56da3b2cc5518ad3225caa91f20"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/f905a7d95091e0d2605a3a1a157a9351f09ab2e1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"url": "https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "NVD-CWE-noinfo"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…