CVE-2026-12365 (GCVE-0-2026-12365)
Vulnerability from cvelistv5 – Published: 2026-08-14 17:52 – Updated: 2026-08-14 19:22
VLAI
EPSS
VEX
Title
Use-after-free in Zephyr delayable work-queue cancellation under SMP timing race
Summary
A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item's timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a concurrent cancellation does not wait for that handler to finish. In unschedule_locked() the pre-fix code called z_abort_timeout(), which for an already-announcing record returns -EINVAL without removing it; cancel_async_locked() then observes the work as idle, so even k_work_cancel_delayable_sync() and k_work_flush_delayable() return without blocking on the in-flight handler.
Because those are the APIs the kernel header documents as the safe way to cancel before freeing a k_work_delayable, a caller that frees the object immediately after a successful sync cancel can race the still-pending handler. work_timeout() subsequently dereferences the freed record: it reads to->dticks via z_is_timeout_handler_canceled() and, if the freed slot has been reused so the bail check fails, performs a read-modify-write of wp->flags (K_WORK_DELAYED_BIT) and submits work against a stale dw->queue pointer — a use-after-free read and write.
The k_work API is kernel-mode only (no __syscall entry point), so this is a kernel-internal concurrency defect rather than a userspace privilege escalation. Triggering it requires an SMP build and a subsystem that schedules and then frees (or reschedules) a delayable work item in the narrow window while its timeout is announcing; an attacker able to influence the timing of such teardown (for example via connection churn driving subsystem timers) has a plausible but probabilistic path. The impact is kernel memory corruption or crash (denial of service).
The fix makes unschedule_locked() wait, by spinning on z_try_abort_timeout() returning -EAGAIN while releasing and re-acquiring the work spinlock, until any in-flight handler completes before returning, and switches work_timeout() to atomic K_WORK_DELAYED_BIT ownership. This closes both the free-then-handler use-after-free and the related reschedule early-fire race.
Severity
5.8 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-08-14 19:22 UTC
CWE
- CWE-416 - use-after-free
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
2.6.0 , < 4.5.0
(semver)
|
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-12365",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-14T19:22:10.432615Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-14T19:22:24.206Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"kernel/work.c"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "2.6.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item\u0027s timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a concurrent cancellation does not wait for that handler to finish. In unschedule_locked() the pre-fix code called z_abort_timeout(), which for an already-announcing record returns -EINVAL without removing it; cancel_async_locked() then observes the work as idle, so even k_work_cancel_delayable_sync() and k_work_flush_delayable() return without blocking on the in-flight handler.\n\nBecause those are the APIs the kernel header documents as the safe way to cancel before freeing a k_work_delayable, a caller that frees the object immediately after a successful sync cancel can race the still-pending handler. work_timeout() subsequently dereferences the freed record: it reads to-\u003edticks via z_is_timeout_handler_canceled() and, if the freed slot has been reused so the bail check fails, performs a read-modify-write of wp-\u003eflags (K_WORK_DELAYED_BIT) and submits work against a stale dw-\u003equeue pointer \u2014 a use-after-free read and write.\n\nThe k_work API is kernel-mode only (no __syscall entry point), so this is a kernel-internal concurrency defect rather than a userspace privilege escalation. Triggering it requires an SMP build and a subsystem that schedules and then frees (or reschedules) a delayable work item in the narrow window while its timeout is announcing; an attacker able to influence the timing of such teardown (for example via connection churn driving subsystem timers) has a plausible but probabilistic path. The impact is kernel memory corruption or crash (denial of service).\n\nThe fix makes unschedule_locked() wait, by spinning on z_try_abort_timeout() returning -EAGAIN while releasing and re-acquiring the work spinlock, until any in-flight handler completes before returning, and switches work_timeout() to atomic K_WORK_DELAYED_BIT ownership. This closes both the free-then-handler use-after-free and the related reschedule early-fire race."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 5.8,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-416",
"description": "use-after-free",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-14T17:52:05.922Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/59cf34bf212eeb5c7ea88b97e15842b1e7c1a6b7"
},
{
"name": "GHSA-rhmh-r93p-6g99",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-rhmh-r93p-6g99"
}
],
"title": "Use-after-free in Zephyr delayable work-queue cancellation under SMP timing race",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-12365",
"datePublished": "2026-08-14T17:52:05.922Z",
"dateReserved": "2026-06-16T03:53:45.082Z",
"dateUpdated": "2026-08-14T19:22:24.206Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-12365",
"date": "2026-09-18",
"epss": "0.001",
"percentile": "0.00942"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"kernel/work.c"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "2.6.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item\u0027s timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a concurrent cancellation does not wait for that handler to finish. In unschedule_locked() the pre-fix code called z_abort_timeout(), which for an already-announcing record returns -EINVAL without removing it; cancel_async_locked() then observes the work as idle, so even k_work_cancel_delayable_sync() and k_work_flush_delayable() return without blocking on the in-flight handler.\n\nBecause those are the APIs the kernel header documents as the safe way to cancel before freeing a k_work_delayable, a caller that frees the object immediately after a successful sync cancel can race the still-pending handler. work_timeout() subsequently dereferences the freed record: it reads to-\u003edticks via z_is_timeout_handler_canceled() and, if the freed slot has been reused so the bail check fails, performs a read-modify-write of wp-\u003eflags (K_WORK_DELAYED_BIT) and submits work against a stale dw-\u003equeue pointer \u2014 a use-after-free read and write.\n\nThe k_work API is kernel-mode only (no __syscall entry point), so this is a kernel-internal concurrency defect rather than a userspace privilege escalation. Triggering it requires an SMP build and a subsystem that schedules and then frees (or reschedules) a delayable work item in the narrow window while its timeout is announcing; an attacker able to influence the timing of such teardown (for example via connection churn driving subsystem timers) has a plausible but probabilistic path. The impact is kernel memory corruption or crash (denial of service).\n\nThe fix makes unschedule_locked() wait, by spinning on z_try_abort_timeout() returning -EAGAIN while releasing and re-acquiring the work spinlock, until any in-flight handler completes before returning, and switches work_timeout() to atomic K_WORK_DELAYED_BIT ownership. This closes both the free-then-handler use-after-free and the related reschedule early-fire race."
}
],
"id": "CVE-2026-12365",
"lastModified": "2026-08-26T16:59:23.267",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.8,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.0,
"impactScore": 4.7,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-12365",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-14T19:22:10.432615Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-08-14T18:17:21.933",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/59cf34bf212eeb5c7ea88b97e15842b1e7c1a6b7"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-rhmh-r93p-6g99"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-416"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-12365",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-14T19:22:10.432615Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-14T19:22:16.611Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"kernel/work.c"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "2.6.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item\u0027s timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a concurrent cancellation does not wait for that handler to finish. In unschedule_locked() the pre-fix code called z_abort_timeout(), which for an already-announcing record returns -EINVAL without removing it; cancel_async_locked() then observes the work as idle, so even k_work_cancel_delayable_sync() and k_work_flush_delayable() return without blocking on the in-flight handler.\n\nBecause those are the APIs the kernel header documents as the safe way to cancel before freeing a k_work_delayable, a caller that frees the object immediately after a successful sync cancel can race the still-pending handler. work_timeout() subsequently dereferences the freed record: it reads to-\u003edticks via z_is_timeout_handler_canceled() and, if the freed slot has been reused so the bail check fails, performs a read-modify-write of wp-\u003eflags (K_WORK_DELAYED_BIT) and submits work against a stale dw-\u003equeue pointer \u2014 a use-after-free read and write.\n\nThe k_work API is kernel-mode only (no __syscall entry point), so this is a kernel-internal concurrency defect rather than a userspace privilege escalation. Triggering it requires an SMP build and a subsystem that schedules and then frees (or reschedules) a delayable work item in the narrow window while its timeout is announcing; an attacker able to influence the timing of such teardown (for example via connection churn driving subsystem timers) has a plausible but probabilistic path. The impact is kernel memory corruption or crash (denial of service).\n\nThe fix makes unschedule_locked() wait, by spinning on z_try_abort_timeout() returning -EAGAIN while releasing and re-acquiring the work spinlock, until any in-flight handler completes before returning, and switches work_timeout() to atomic K_WORK_DELAYED_BIT ownership. This closes both the free-then-handler use-after-free and the related reschedule early-fire race."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 5.8,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-416",
"description": "use-after-free",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-14T17:52:05.922Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/59cf34bf212eeb5c7ea88b97e15842b1e7c1a6b7"
},
{
"name": "GHSA-rhmh-r93p-6g99",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-rhmh-r93p-6g99"
}
],
"title": "Use-after-free in Zephyr delayable work-queue cancellation under SMP timing race",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-12365",
"datePublished": "2026-08-14T17:52:05.922Z",
"dateReserved": "2026-06-16T03:53:45.082Z",
"dateUpdated": "2026-08-14T19:22:24.206Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…