{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting this vulnerability to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "The CPCI85 firmware of SICAM A8000 CP-8031 and CP-8050 is affected by a command injection vulnerability that could allow an authenticated remote attacker to inject commands that are executed on the device with root privileges during device startup.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\nSiemens strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment. \nAs a general security measure Siemens strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.\n\nRecommended security guidelines can be found at:\n\nhttps://www.siemens.com/gridsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of these vulnerabilities.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-583634.json"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-583634.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-011-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-011-08.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-011-08 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-011-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SICAM A8000",
    "tracking": {
      "current_release_date": "2024-01-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-011-08",
      "initial_release_date": "2024-01-09T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cCPCI85_V05.20",
                "product": {
                  "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2803-1AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cCPCI85_V05.20",
                "product": {
                  "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2805-0AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-42797",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Review the list of users that are allowed to modify the network configuration and apply strong passwords",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to CPCI85 V05.20 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-42797"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting this vulnerability to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "The CPCI85 firmware of SICAM A8000 CP-8031 and CP-8050 is affected by a command injection vulnerability that could allow an authenticated remote attacker to inject commands that are executed on the device with root privileges during device startup.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\nSiemens strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment. \nAs a general security measure Siemens strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.\n\nRecommended security guidelines can be found at:\n\nhttps://www.siemens.com/gridsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of these vulnerabilities.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-583634.json"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-583634.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-011-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-011-08.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-011-08 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-011-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SICAM A8000",
    "tracking": {
      "current_release_date": "2024-01-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-011-08",
      "initial_release_date": "2024-01-09T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cCPCI85_V05.20",
                "product": {
                  "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2803-1AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cCPCI85_V05.20",
                "product": {
                  "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2805-0AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-42797",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Review the list of users that are allowed to modify the network configuration and apply strong passwords",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to CPCI85 V05.20 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-42797"
    }
  ]
}

{
  "affected": [],
  "aliases": [
    "CVE-2023-42797"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-908"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2024-01-09T10:15:15Z",
    "severity": "MODERATE"
  },
  "details": "A vulnerability has been identified in CP-8031 MASTER MODULE (All versions \u003c CPCI85 V05.20), CP-8050 MASTER MODULE (All versions \u003c CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\n\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
  "id": "GHSA-j695-jhjg-w8vx",
  "modified": "2024-01-09T12:30:35Z",
  "published": "2024-01-09T12:30:35Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-42797"
    },
    {
      "type": "WEB",
      "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "mittel"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Siemens SICAM ist eine Produktfamilie von SCADA-Systemen f\u00fcr den Betrieb von industriellen Prozessen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, authentisierter Angreifer kann eine Schwachstelle in Siemens SICAM A8000 ausnutzen, um beliebigen Programmcode mit Administratorrechten auszuf\u00fchren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- BIOS/Firmware",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2024-0030 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2024/wid-sec-w-2024-0030.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2024-0030 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2024-0030"
      },
      {
        "category": "external",
        "summary": "Siemens Product CERT Security Advisory SSA-583634 vom 2024-01-09",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
      }
    ],
    "source_lang": "en-US",
    "title": "Siemens SICAM A8000: Schwachstelle erm\u00f6glicht Ausf\u00fchren von beliebigem Programmcode mit Administratorrechten",
    "tracking": {
      "current_release_date": "2024-01-09T23:00:00.000+00:00",
      "generator": {
        "date": "2024-08-15T18:03:21.754+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.5"
        }
      },
      "id": "WID-SEC-W-2024-0030",
      "initial_release_date": "2024-01-09T23:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2024-01-09T23:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Siemens SICAM A8000 P-8031 \u003c CPCI85 V05.20",
                "product": {
                  "name": "Siemens SICAM A8000 P-8031 \u003c CPCI85 V05.20",
                  "product_id": "T031918",
                  "product_identification_helper": {
                    "cpe": "cpe:/h:siemens:sicam:a8000_p-8031__cpci85_v05.20"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Siemens SICAM A8000 P-8050 \u003c CPCI85 V05.20",
                "product": {
                  "name": "Siemens SICAM A8000 P-8050 \u003c CPCI85 V05.20",
                  "product_id": "T031919",
                  "product_identification_helper": {
                    "cpe": "cpe:/h:siemens:sicam:a8000_p-8050__cpci85_v05.20"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SICAM"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-42797",
      "notes": [
        {
          "category": "description",
          "text": "Es existiert eine Schwachstelle in Siemens SICAM A8000. Der Fehler besteht in der Konvertierung von ipv4-Adressen. Ein entfernter, authentisierter Angreifer mit bestimmten Rechten kann diese Schwachstelle ausnutzen, indem er speziell gestaltete Netzwerkkonfigurationen hochl\u00e4dt, um Befehle einzuschleusen, die w\u00e4hrend des Ger\u00e4testarts mit Root-Rechten auf dem Ger\u00e4t ausgef\u00fchrt werden."
        }
      ],
      "release_date": "2024-01-09T23:00:00.000+00:00",
      "title": "CVE-2023-42797"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "mittel"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Siemens SICAM ist eine Produktfamilie von SCADA-Systemen f\u00fcr den Betrieb von industriellen Prozessen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, authentisierter Angreifer kann eine Schwachstelle in Siemens SICAM A8000 ausnutzen, um beliebigen Programmcode mit Administratorrechten auszuf\u00fchren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- BIOS/Firmware",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2024-0030 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2024/wid-sec-w-2024-0030.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2024-0030 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2024-0030"
      },
      {
        "category": "external",
        "summary": "Siemens Product CERT Security Advisory SSA-583634 vom 2024-01-09",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
      }
    ],
    "source_lang": "en-US",
    "title": "Siemens SICAM A8000: Schwachstelle erm\u00f6glicht Ausf\u00fchren von beliebigem Programmcode mit Administratorrechten",
    "tracking": {
      "current_release_date": "2024-01-09T23:00:00.000+00:00",
      "generator": {
        "date": "2024-08-15T18:03:21.754+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.5"
        }
      },
      "id": "WID-SEC-W-2024-0030",
      "initial_release_date": "2024-01-09T23:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2024-01-09T23:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Siemens SICAM A8000 P-8031 \u003c CPCI85 V05.20",
                "product": {
                  "name": "Siemens SICAM A8000 P-8031 \u003c CPCI85 V05.20",
                  "product_id": "T031918",
                  "product_identification_helper": {
                    "cpe": "cpe:/h:siemens:sicam:a8000_p-8031__cpci85_v05.20"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Siemens SICAM A8000 P-8050 \u003c CPCI85 V05.20",
                "product": {
                  "name": "Siemens SICAM A8000 P-8050 \u003c CPCI85 V05.20",
                  "product_id": "T031919",
                  "product_identification_helper": {
                    "cpe": "cpe:/h:siemens:sicam:a8000_p-8050__cpci85_v05.20"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SICAM"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-42797",
      "notes": [
        {
          "category": "description",
          "text": "Es existiert eine Schwachstelle in Siemens SICAM A8000. Der Fehler besteht in der Konvertierung von ipv4-Adressen. Ein entfernter, authentisierter Angreifer mit bestimmten Rechten kann diese Schwachstelle ausnutzen, indem er speziell gestaltete Netzwerkkonfigurationen hochl\u00e4dt, um Befehle einzuschleusen, die w\u00e4hrend des Ger\u00e4testarts mit Root-Rechten auf dem Ger\u00e4t ausgef\u00fchrt werden."
        }
      ],
      "release_date": "2024-01-09T23:00:00.000+00:00",
      "title": "CVE-2023-42797"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "The CPCI85 firmware of SICAM A8000 CP-8031 and CP-8050 is affected by a command injection vulnerability that could allow an authenticated remote attacker to inject commands that are executed on the device with root privileges during device startup.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\nSiemens strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment. \nAs a general security measure Siemens strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.\n\nRecommended security guidelines can be found at:\n\nhttps://www.siemens.com/gridsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-583634.json"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-583634.txt"
      }
    ],
    "title": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices",
    "tracking": {
      "current_release_date": "2024-01-09T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-583634",
      "initial_release_date": "2024-01-09T00:00:00Z",
      "revision_history": [
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "interim",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "All versions \u003c CPCI85 V05.20",
                "product": {
                  "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2803-1AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "All versions \u003c CPCI85 V05.20",
                "product": {
                  "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2805-0AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-42797",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Review the list of users that are allowed to modify the network configuration and apply strong passwords",
          "product_ids": [
            "1",
            "2"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to CPCI85 V05.20 or later version",
          "product_ids": [
            "1",
            "2"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2023-42797"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "The CPCI85 firmware of SICAM A8000 CP-8031 and CP-8050 is affected by a command injection vulnerability that could allow an authenticated remote attacker to inject commands that are executed on the device with root privileges during device startup.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\nSiemens strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment. \nAs a general security measure Siemens strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.\n\nRecommended security guidelines can be found at:\n\nhttps://www.siemens.com/gridsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-583634.json"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-583634.txt"
      }
    ],
    "title": "SSA-583634: Command Injection Vulnerability in the CPCI85 Firmware of SICAM A8000 Devices",
    "tracking": {
      "current_release_date": "2024-01-09T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-583634",
      "initial_release_date": "2024-01-09T00:00:00Z",
      "revision_history": [
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "interim",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "All versions \u003c CPCI85 V05.20",
                "product": {
                  "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2803-1AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8031 MASTER MODULE (6MF2803-1AA00)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "All versions \u003c CPCI85 V05.20",
                "product": {
                  "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6MF2805-0AA00"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "CP-8050 MASTER MODULE (6MF2805-0AA00)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-42797",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Review the list of users that are allowed to modify the network configuration and apply strong passwords",
          "product_ids": [
            "1",
            "2"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to CPCI85 V05.20 or later version",
          "product_ids": [
            "1",
            "2"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2023-42797"
    }
  ]
}

{
  "$ref": "https://www.cert.ssi.gouv.fr/openapi.json",
  "affected_systems": [
    {
      "description": "Spectrum Power 7 versions ant\u00e9rieures \u00e0 V23Q4",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "CP-8050 MASTER MODULE (6MF2805-0AA00) versions ant\u00e9rieures \u00e0 CPCI85 V05.20",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "Teamcenter Visualization versions V14.2 ant\u00e9rieures \u00e0 V14.2.0.9",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "JT2Go versions ant\u00e9rieures \u00e0 V14.3.0.6",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "Teamcenter Visualization versions V14.1 ant\u00e9rieures \u00e0 V14.1.0.12",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "SIMATIC IPC647E avec maxView Storage Manager versions ant\u00e9rieures \u00e0 V4.14.00.26068 sur Windows",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "SIMATIC IPC847E avec maxView Storage Manager versions ant\u00e9rieures \u00e0 V4.14.00.26068 sur Windows",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "SIMATIC CN 4100 versions ant\u00e9rieures \u00e0 V2.7",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "SIMATIC IPC1047E avec maxView Storage Manager versions ant\u00e9rieures \u00e0 V4.14.00.26068 sur Windows",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "CP-8031 MASTER MODULE (6MF2803-1AA00) versions ant\u00e9rieures \u00e0 CPCI85 V05.20",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "Teamcenter Visualization versions V14.3 ant\u00e9rieures \u00e0 V14.3.0.6",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "Teamcenter Visualization versions V13.3 ant\u00e9rieures \u00e0 V13.3.0.13",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    },
    {
      "description": "Solid Edge SE2023 versions ant\u00e9rieures \u00e0 V223.0 Update 10",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Siemens",
          "scada": true
        }
      }
    }
  ],
  "affected_systems_content": null,
  "content": "## Solution\n\nSe r\u00e9f\u00e9rer au bulletin de s\u00e9curit\u00e9 de l\u0027\u00e9diteur pour l\u0027obtention des\ncorrectifs (cf. section Documentation).\n",
  "cves": [
    {
      "name": "CVE-2023-49252",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49252"
    },
    {
      "name": "CVE-2023-49123",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49123"
    },
    {
      "name": "CVE-2023-42797",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-42797"
    },
    {
      "name": "CVE-2023-49132",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49132"
    },
    {
      "name": "CVE-2023-51744",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-51744"
    },
    {
      "name": "CVE-2023-49251",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49251"
    },
    {
      "name": "CVE-2023-51438",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-51438"
    },
    {
      "name": "CVE-2023-49122",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49122"
    },
    {
      "name": "CVE-2023-51746",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-51746"
    },
    {
      "name": "CVE-2023-51439",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-51439"
    },
    {
      "name": "CVE-2023-51745",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-51745"
    },
    {
      "name": "CVE-2023-49124",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49124"
    },
    {
      "name": "CVE-2023-49130",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49130"
    },
    {
      "name": "CVE-2023-49131",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49131"
    },
    {
      "name": "CVE-2023-49129",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49129"
    },
    {
      "name": "CVE-2023-44120",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-44120"
    },
    {
      "name": "CVE-2023-49621",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49621"
    },
    {
      "name": "CVE-2023-49126",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49126"
    },
    {
      "name": "CVE-2023-49121",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49121"
    },
    {
      "name": "CVE-2023-49127",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49127"
    },
    {
      "name": "CVE-2023-49128",
      "url": "https://www.cve.org/CVERecord?id=CVE-2023-49128"
    }
  ],
  "initial_release_date": "2024-01-09T00:00:00",
  "last_revision_date": "2024-01-09T00:00:00",
  "links": [],
  "reference": "CERTFR-2024-AVI-0014",
  "revisions": [
    {
      "description": "Version initiale",
      "revision_date": "2024-01-09T00:00:00.000000"
    }
  ],
  "risks": [
    {
      "description": "D\u00e9ni de service \u00e0 distance"
    },
    {
      "description": "Ex\u00e9cution de code arbitraire \u00e0 distance"
    },
    {
      "description": "Atteinte \u00e0 l\u0027int\u00e9grit\u00e9 des donn\u00e9es"
    },
    {
      "description": "Contournement de la politique de s\u00e9curit\u00e9"
    },
    {
      "description": "\u00c9l\u00e9vation de privil\u00e8ges"
    }
  ],
  "summary": "De multiples vuln\u00e9rabilit\u00e9s ont \u00e9t\u00e9 d\u00e9couvertes dans les produits\nSiemens. Certaines d\u0027entre elles permettent \u00e0 un attaquant de provoquer\nune ex\u00e9cution de code arbitraire \u00e0 distance, un d\u00e9ni de service \u00e0\ndistance et un contournement de la politique de s\u00e9curit\u00e9.\n",
  "title": "Multiples vuln\u00e9rabilit\u00e9s dans les produits Siemens",
  "vendor_advisories": [
    {
      "published_at": null,
      "title": "Bulletin de s\u00e9curit\u00e9 Siemens ssa-777015 du 09 janvier 2024",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-777015.html"
    },
    {
      "published_at": null,
      "title": "Bulletin de s\u00e9curit\u00e9 Siemens ssa-794653 du 09 janvier 2024",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-794653.html"
    },
    {
      "published_at": null,
      "title": "Bulletin de s\u00e9curit\u00e9 Siemens ssa-583634 du 09 janvier 2024",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html"
    },
    {
      "published_at": null,
      "title": "Bulletin de s\u00e9curit\u00e9 Siemens ssa-702935 du 09 janvier 2024",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-702935.html"
    },
    {
      "published_at": null,
      "title": "Bulletin de s\u00e9curit\u00e9 Siemens ssa-589891 du 09 janvier 2024",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-589891.html"
    },
    {
      "published_at": null,
      "title": "Bulletin de s\u00e9curit\u00e9 Siemens ssa-786191 du 09 janvier 2024",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-786191.html"
    }
  ]
}

{
  "@context": {
    "@vocab": "https://www.variotdbs.pl/ref/VARIoTentry#",
    "affected_products": {
      "@id": "https://www.variotdbs.pl/ref/affected_products"
    },
    "credits": {
      "@id": "https://www.variotdbs.pl/ref/credits"
    },
    "cvss": {
      "@id": "https://www.variotdbs.pl/ref/cvss/"
    },
    "description": {
      "@id": "https://www.variotdbs.pl/ref/description/"
    },
    "exploit_availability": {
      "@id": "https://www.variotdbs.pl/ref/exploit_availability/"
    },
    "external_ids": {
      "@id": "https://www.variotdbs.pl/ref/external_ids/"
    },
    "iot": {
      "@id": "https://www.variotdbs.pl/ref/iot/"
    },
    "iot_taxonomy": {
      "@id": "https://www.variotdbs.pl/ref/iot_taxonomy/"
    },
    "patch": {
      "@id": "https://www.variotdbs.pl/ref/patch/"
    },
    "problemtype_data": {
      "@id": "https://www.variotdbs.pl/ref/problemtype_data/"
    },
    "references": {
      "@id": "https://www.variotdbs.pl/ref/references/"
    },
    "sources": {
      "@id": "https://www.variotdbs.pl/ref/sources/"
    },
    "sources_release_date": {
      "@id": "https://www.variotdbs.pl/ref/sources_release_date/"
    },
    "sources_update_date": {
      "@id": "https://www.variotdbs.pl/ref/sources_update_date/"
    },
    "threat_type": {
      "@id": "https://www.variotdbs.pl/ref/threat_type/"
    },
    "title": {
      "@id": "https://www.variotdbs.pl/ref/title/"
    },
    "type": {
      "@id": "https://www.variotdbs.pl/ref/type/"
    }
  },
  "@id": "https://www.variotdbs.pl/vuln/VAR-202401-0853",
  "affected_products": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/affected_products#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        },
        "@id": "https://www.variotdbs.pl/ref/sources"
      }
    },
    "data": [
      {
        "model": "sicam a8000 cp-8031",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "siemens",
        "version": "05.20"
      },
      {
        "model": "sicam a8000 cp-8050",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "siemens",
        "version": "05.20"
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "cve": "CVE-2023-42797",
  "cvss": {
    "@context": {
      "cvssV2": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/cvss/cvssV2#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/cvssV2"
      },
      "cvssV3": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/cvss/cvssV3#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/cvssV3/"
      },
      "severity": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/cvss/severity#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/severity"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        },
        "@id": "https://www.variotdbs.pl/ref/sources"
      }
    },
    "data": [
      {
        "cvssV2": [],
        "cvssV3": [
          {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "author": "nvd@nist.gov",
            "availabilityImpact": "HIGH",
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "exploitabilityScore": 1.2,
            "id": "CVE-2023-42797",
            "impactScore": 5.9,
            "integrityImpact": "HIGH",
            "privilegesRequired": "HIGH",
            "scope": "UNCHANGED",
            "trust": 1.0,
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "author": "productcert@siemens.com",
            "availabilityImpact": "HIGH",
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "exploitabilityScore": 0.7,
            "id": "CVE-2023-42797",
            "impactScore": 5.9,
            "integrityImpact": "HIGH",
            "privilegesRequired": "HIGH",
            "scope": "UNCHANGED",
            "trust": 1.0,
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          }
        ],
        "severity": [
          {
            "author": "nvd@nist.gov",
            "id": "CVE-2023-42797",
            "trust": 1.0,
            "value": "HIGH"
          },
          {
            "author": "productcert@siemens.com",
            "id": "CVE-2023-42797",
            "trust": 1.0,
            "value": "MEDIUM"
          }
        ]
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      },
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "description": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/description#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "A vulnerability has been identified in CP-8031 MASTER MODULE (All versions \u003c CPCI85 V05.20), CP-8050 MASTER MODULE (All versions \u003c CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ],
    "trust": 1.0
  },
  "external_ids": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/external_ids#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "db": "SIEMENS",
        "id": "SSA-583634",
        "trust": 1.0
      },
      {
        "db": "NVD",
        "id": "CVE-2023-42797",
        "trust": 1.0
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "id": "VAR-202401-0853",
  "iot": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/iot#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": true,
    "sources": [
      {
        "db": "VARIoT devices database",
        "id": null
      }
    ],
    "trust": 0.532509165
  },
  "last_update_date": "2024-08-14T15:41:25.669000Z",
  "problemtype_data": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/problemtype_data#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "problemtype": "CWE-908",
        "trust": 1.0
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "references": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/references#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "trust": 1.0,
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "sources": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "sources_release_date": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources_release_date#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "date": "2024-01-09T10:15:15.320000",
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  },
  "sources_update_date": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources_update_date#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "date": "2024-01-16T15:29:43.977000",
        "db": "NVD",
        "id": "CVE-2023-42797"
      }
    ]
  }
}

{
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:siemens:sicam_a8000_cp-8050_firmware:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "F6EB6432-1779-4083-BE80-3C1A6B4BE637",
              "versionEndExcluding": "05.20",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:siemens:sicam_a8000_cp-8050:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "FC600085-2164-43DD-90D6-892EC31432E0",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:siemens:sicam_a8000_cp-8031_firmware:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "A35CE504-A034-463E-B4DC-6C91D72C0E1D",
              "versionEndExcluding": "05.20",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:siemens:sicam_a8000_cp-8031:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "460D8D7D-A0DF-4828-B2AC-ECD6DB1DAA4A",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "A vulnerability has been identified in CP-8031 MASTER MODULE (All versions \u003c CPCI85 V05.20), CP-8050 MASTER MODULE (All versions \u003c CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup."
    },
    {
      "lang": "es",
      "value": "Se ha identificado una vulnerabilidad en CP-8031 MASTER MODULE (Todas las versiones \u0026lt; CPCI85 V05.20), CP-8050 MASTER MODULE (Todas las versiones \u0026lt; CPCI85 V05.20). El servicio de configuraci\u00f3n de red de los dispositivos afectados contiene un fallo en la conversi\u00f3n de direcciones IPv4 que podr\u00eda llevar a que se utilice una variable no inicializada en los siguientes pasos de validaci\u00f3n. Al cargar una configuraci\u00f3n de red especialmente manipulada, un atacante remoto autenticado podr\u00eda inyectar comandos que se ejecutan en el dispositivo con privilegios de root durante el inicio del dispositivo."
    }
  ],
  "id": "CVE-2023-42797",
  "lastModified": "2024-11-21T08:23:10.517",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "HIGH",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 6.6,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "HIGH",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 0.7,
        "impactScore": 5.9,
        "source": "productcert@siemens.com",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 7.2,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "HIGH",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.2,
        "impactScore": 5.9,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ]
  },
  "published": "2024-01-09T10:15:15.320",
  "references": [
    {
      "source": "productcert@siemens.com",
      "tags": [
        "Patch",
        "Vendor Advisory"
      ],
      "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "tags": [
        "Patch",
        "Vendor Advisory"
      ],
      "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
    }
  ],
  "sourceIdentifier": "productcert@siemens.com",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-908"
        }
      ],
      "source": "productcert@siemens.com",
      "type": "Primary"
    }
  ]
}

{
  "cves": {
    "cve": {
      "cveNumber": "CVE-2023-42797"
    }
  },
  "description": "SICAM A8000 rtu(\u8fdc\u7a0b\u7ec8\u7aef\u5355\u5143)\u7cfb\u5217\u662f\u4e00\u79cd\u6a21\u5757\u5316\u8bbe\u5907\u7cfb\u5217\uff0c\u9002\u7528\u4e8e\u6240\u6709\u80fd\u6e90\u4f9b\u5e94\u9886\u57df\u7684\u9065\u63a7\u548c\u81ea\u52a8\u5316\u5e94\u7528\u3002\n\nSiemens CPCI85 Firmware of SICAM A8000 Devices\u5b58\u5728\u547d\u4ee4\u6ce8\u5165\u6f0f\u6d1e\uff0c\u7ecf\u8fc7\u8eab\u4efd\u9a8c\u8bc1\u7684\u8fdc\u7a0b\u653b\u51fb\u8005\u53ef\u5229\u7528\u8be5\u6f0f\u6d1e\u5728\u8bbe\u5907\u542f\u52a8\u671f\u95f4\u4ee5root\u6743\u9650\u6ce8\u5165\u5728\u8bbe\u5907\u4e0a\u6267\u884c\u7684\u547d\u4ee4\u3002",
  "formalWay": "\u5382\u5546\u5df2\u53d1\u5e03\u4e86\u6f0f\u6d1e\u4fee\u590d\u7a0b\u5e8f\uff0c\u8bf7\u53ca\u65f6\u5173\u6ce8\u66f4\u65b0\uff1a\r\nhttps://cert-portal.siemens.com/productcert/html/ssa-583634.html",
  "isEvent": "\u901a\u7528\u8f6f\u786c\u4ef6\u6f0f\u6d1e",
  "number": "CNVD-2024-01410",
  "openTime": "2024-01-10",
  "patchDescription": "SICAM A8000 rtu(\u8fdc\u7a0b\u7ec8\u7aef\u5355\u5143)\u7cfb\u5217\u662f\u4e00\u79cd\u6a21\u5757\u5316\u8bbe\u5907\u7cfb\u5217\uff0c\u9002\u7528\u4e8e\u6240\u6709\u80fd\u6e90\u4f9b\u5e94\u9886\u57df\u7684\u9065\u63a7\u548c\u81ea\u52a8\u5316\u5e94\u7528\u3002\r\n\r\nSiemens CPCI85 Firmware of SICAM A8000 Devices\u5b58\u5728\u547d\u4ee4\u6ce8\u5165\u6f0f\u6d1e\uff0c\u7ecf\u8fc7\u8eab\u4efd\u9a8c\u8bc1\u7684\u8fdc\u7a0b\u653b\u51fb\u8005\u53ef\u5229\u7528\u8be5\u6f0f\u6d1e\u5728\u8bbe\u5907\u542f\u52a8\u671f\u95f4\u4ee5root\u6743\u9650\u6ce8\u5165\u5728\u8bbe\u5907\u4e0a\u6267\u884c\u7684\u547d\u4ee4\u3002\u76ee\u524d\uff0c\u4f9b\u5e94\u5546\u53d1\u5e03\u4e86\u5b89\u5168\u516c\u544a\u53ca\u76f8\u5173\u8865\u4e01\u4fe1\u606f\uff0c\u4fee\u590d\u4e86\u6b64\u6f0f\u6d1e\u3002",
  "patchName": "Siemens CPCI85 Firmware of SICAM A8000 Devices\u547d\u4ee4\u6ce8\u5165\u6f0f\u6d1e\u7684\u8865\u4e01",
  "products": {
    "product": [
      "Siemens CP-8031 MASTER MODULE (6MF2803-1AA00) \u003cCPCI85 V05.20",
      "Siemens CP-8050 MASTER MODULE (6MF2805-0AA00) \u003cCPCI85 V05.20"
    ]
  },
  "referenceLink": "https://cert-portal.siemens.com/productcert/html/ssa-583634.html",
  "serverity": "\u9ad8",
  "submitTime": "2024-01-10",
  "title": "Siemens CPCI85 Firmware of SICAM A8000 Devices\u547d\u4ee4\u6ce8\u5165\u6f0f\u6d1e"
}

{
  "GSD": {
    "alias": "CVE-2023-42797",
    "id": "GSD-2023-42797"
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2023-42797"
      ],
      "details": "A vulnerability has been identified in CP-8031 MASTER MODULE (All versions \u003c CPCI85 V05.20), CP-8050 MASTER MODULE (All versions \u003c CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.",
      "id": "GSD-2023-42797",
      "modified": "2023-12-13T01:20:21.854908Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "productcert@siemens.com",
        "ID": "CVE-2023-42797",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "CP-8031 MASTER MODULE",
                    "version": {
                      "version_data": [
                        {
                          "version_affected": "=",
                          "version_value": "All versions \u003c CPCI85 V05.20"
                        }
                      ]
                    }
                  },
                  {
                    "product_name": "CP-8050 MASTER MODULE",
                    "version": {
                      "version_data": [
                        {
                          "version_affected": "=",
                          "version_value": "All versions \u003c CPCI85 V05.20"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "Siemens"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "A vulnerability has been identified in CP-8031 MASTER MODULE (All versions \u003c CPCI85 V05.20), CP-8050 MASTER MODULE (All versions \u003c CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup."
          }
        ]
      },
      "impact": {
        "cvss": [
          {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          }
        ]
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "cweId": "CWE-908",
                "lang": "eng",
                "value": "CWE-908: Use of Uninitialized Resource"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf",
            "refsource": "MISC",
            "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
          }
        ]
      }
    },
    "nvd.nist.gov": {
      "cve": {
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:siemens:sicam_a8000_cp-8050_firmware:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "F6EB6432-1779-4083-BE80-3C1A6B4BE637",
                    "versionEndExcluding": "05.20",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              },
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:h:siemens:sicam_a8000_cp-8050:-:*:*:*:*:*:*:*",
                    "matchCriteriaId": "FC600085-2164-43DD-90D6-892EC31432E0",
                    "vulnerable": false
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ],
            "operator": "AND"
          },
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:siemens:sicam_a8000_cp-8031_firmware:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "A35CE504-A034-463E-B4DC-6C91D72C0E1D",
                    "versionEndExcluding": "05.20",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              },
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:h:siemens:sicam_a8000_cp-8031:-:*:*:*:*:*:*:*",
                    "matchCriteriaId": "460D8D7D-A0DF-4828-B2AC-ECD6DB1DAA4A",
                    "vulnerable": false
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ],
            "operator": "AND"
          }
        ],
        "descriptions": [
          {
            "lang": "en",
            "value": "A vulnerability has been identified in CP-8031 MASTER MODULE (All versions \u003c CPCI85 V05.20), CP-8050 MASTER MODULE (All versions \u003c CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps.\r\n\r\nBy uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup."
          },
          {
            "lang": "es",
            "value": "Se ha identificado una vulnerabilidad en CP-8031 MASTER MODULE (Todas las versiones \u0026lt; CPCI85 V05.20), CP-8050 MASTER MODULE (Todas las versiones \u0026lt; CPCI85 V05.20). El servicio de configuraci\u00f3n de red de los dispositivos afectados contiene un fallo en la conversi\u00f3n de direcciones IPv4 que podr\u00eda llevar a que se utilice una variable no inicializada en los siguientes pasos de validaci\u00f3n. Al cargar una configuraci\u00f3n de red especialmente manipulada, un atacante remoto autenticado podr\u00eda inyectar comandos que se ejecutan en el dispositivo con privilegios de root durante el inicio del dispositivo."
          }
        ],
        "id": "CVE-2023-42797",
        "lastModified": "2024-01-16T15:29:43.977",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 7.2,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "HIGH",
                "integrityImpact": "HIGH",
                "privilegesRequired": "HIGH",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.2,
              "impactScore": 5.9,
              "source": "nvd@nist.gov",
              "type": "Primary"
            },
            {
              "cvssData": {
                "attackComplexity": "HIGH",
                "attackVector": "NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 6.6,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "HIGH",
                "integrityImpact": "HIGH",
                "privilegesRequired": "HIGH",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 0.7,
              "impactScore": 5.9,
              "source": "productcert@siemens.com",
              "type": "Secondary"
            }
          ]
        },
        "published": "2024-01-09T10:15:15.320",
        "references": [
          {
            "source": "productcert@siemens.com",
            "tags": [
              "Patch",
              "Vendor Advisory"
            ],
            "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-583634.pdf"
          }
        ],
        "sourceIdentifier": "productcert@siemens.com",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-908"
              }
            ],
            "source": "productcert@siemens.com",
            "type": "Primary"
          }
        ]
      }
    }
  }
}