GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

CVE-2022-49157 (GCVE-0-2022-49157)

Vulnerability from cvelistv5 – Published: 2025-02-26 01:55 – Updated: 2026-05-11 18:54
VLAI
Title
scsi: qla2xxx: Fix premature hw access after PCI error
Summary
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5 mb[0-3]=[0xffff 0xffff 0xffff 0xffff]
Severity
5.5 (Medium)
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Assigner
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 858808019313f217d63ec4ad26686e6fb7b08c19 , < 5ef6319f9882699613d5182fbd7929b017e8c5ab (git)
Affected: 858808019313f217d63ec4ad26686e6fb7b08c19 , < d7994dff9071555a959a168f9184dd9abae68a6b (git)
Affected: 858808019313f217d63ec4ad26686e6fb7b08c19 , < 6c125fd5ad035777f7b471553f7ddda76e8e7136 (git)
Affected: 858808019313f217d63ec4ad26686e6fb7b08c19 , < e35920ab7874d5e2faeb4f958a74bfa793f1ce5a (git)
guessed Create a notification for this product.
Linux Linux Affected: 2.6.33
Unaffected: 0 , < 2.6.33 (semver)
Unaffected: 5.15.33 , ≤ 5.15.* (semver)
Unaffected: 5.16.19 , ≤ 5.16.* (semver)
Unaffected: 5.17.2 , ≤ 5.17.* (semver)
Unaffected: 5.18 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/scsi/qla2xxx/qla_os.c",
            "drivers/scsi/qla2xxx/qla_tmpl.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "5ef6319f9882699613d5182fbd7929b017e8c5ab",
              "status": "affected",
              "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
              "versionType": "git"
            },
            {
              "lessThan": "d7994dff9071555a959a168f9184dd9abae68a6b",
              "status": "affected",
              "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
              "versionType": "git"
            },
            {
              "lessThan": "6c125fd5ad035777f7b471553f7ddda76e8e7136",
              "status": "affected",
              "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
              "versionType": "git"
            },
            {
              "lessThan": "e35920ab7874d5e2faeb4f958a74bfa793f1ce5a",
              "status": "affected",
              "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/scsi/qla2xxx/qla_os.c",
            "drivers/scsi/qla2xxx/qla_tmpl.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.33"
            },
            {
              "lessThan": "2.6.33",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.33",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.16.*",
              "status": "unaffected",
              "version": "5.16.19",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.17.*",
              "status": "unaffected",
              "version": "5.17.2",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "5.18",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.33",
                  "versionStartIncluding": "2.6.33",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.16.19",
                  "versionStartIncluding": "2.6.33",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.17.2",
                  "versionStartIncluding": "2.6.33",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.18",
                  "versionStartIncluding": "2.6.33",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Fix premature hw access after PCI error\n\nAfter a recoverable PCI error has been detected and recovered, qla driver\nneeds to check to see if the error condition still persist and/or wait\nfor the OS to give the resume signal.\n\nSep  8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440\nqla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]\nSep  8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60\n[qla2xxx]\nSep  8 22:26:03 localhost kernel: Call Trace:\nSep  8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]\nSep  8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160\n[qla2xxx]\nSep  8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]\nSep  8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120\n[qla2xxx]\nSep  8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80\nSep  8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80\nSep  8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90\nSep  8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0\nSep  8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240\nSep  8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0\nSep  8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360\n..\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI\ndisconnect.\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:\nqla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to\ncapture FW dump\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,\nwaited 5221 msecs\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio\nenabled returning.\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX\nCommand timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5\nmb[0-3]=[0xffff 0xffff 0xffff 0xffff]"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T18:54:14.424Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/5ef6319f9882699613d5182fbd7929b017e8c5ab"
        },
        {
          "url": "https://git.kernel.org/stable/c/d7994dff9071555a959a168f9184dd9abae68a6b"
        },
        {
          "url": "https://git.kernel.org/stable/c/6c125fd5ad035777f7b471553f7ddda76e8e7136"
        },
        {
          "url": "https://git.kernel.org/stable/c/e35920ab7874d5e2faeb4f958a74bfa793f1ce5a"
        }
      ],
      "title": "scsi: qla2xxx: Fix premature hw access after PCI error",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2022-49157",
    "datePublished": "2025-02-26T01:55:20.807Z",
    "dateReserved": "2025-02-26T01:49:39.276Z",
    "dateUpdated": "2026-05-11T18:54:14.424Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2022-49157",
      "date": "2026-09-19",
      "epss": "0.00263",
      "percentile": "0.18508"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/scsi/qla2xxx/qla_os.c",
                  "drivers/scsi/qla2xxx/qla_tmpl.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "5ef6319f9882699613d5182fbd7929b017e8c5ab",
                    "status": "affected",
                    "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "d7994dff9071555a959a168f9184dd9abae68a6b",
                    "status": "affected",
                    "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "6c125fd5ad035777f7b471553f7ddda76e8e7136",
                    "status": "affected",
                    "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e35920ab7874d5e2faeb4f958a74bfa793f1ce5a",
                    "status": "affected",
                    "version": "858808019313f217d63ec4ad26686e6fb7b08c19",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/scsi/qla2xxx/qla_os.c",
                  "drivers/scsi/qla2xxx/qla_tmpl.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "2.6.33"
                  },
                  {
                    "lessThan": "2.6.33",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.15.*",
                    "status": "unaffected",
                    "version": "5.15.33",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.16.*",
                    "status": "unaffected",
                    "version": "5.16.19",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.17.*",
                    "status": "unaffected",
                    "version": "5.17.2",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "5.18",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "0B4D5502-DA34-43DA-93D1-158E3047C2C7",
                    "versionEndExcluding": "5.15.33",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "20C43679-0439-405A-B97F-685BEE50613B",
                    "versionEndExcluding": "5.16.19",
                    "versionStartIncluding": "5.16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "210C679C-CF84-44A3-8939-E629C87E54BF",
                    "versionEndExcluding": "5.17.2",
                    "versionStartIncluding": "5.17",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Fix premature hw access after PCI error\n\nAfter a recoverable PCI error has been detected and recovered, qla driver\nneeds to check to see if the error condition still persist and/or wait\nfor the OS to give the resume signal.\n\nSep  8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440\nqla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]\nSep  8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60\n[qla2xxx]\nSep  8 22:26:03 localhost kernel: Call Trace:\nSep  8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]\nSep  8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160\n[qla2xxx]\nSep  8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]\nSep  8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120\n[qla2xxx]\nSep  8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80\nSep  8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80\nSep  8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90\nSep  8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0\nSep  8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240\nSep  8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0\nSep  8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360\n..\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI\ndisconnect.\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:\nqla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to\ncapture FW dump\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,\nwaited 5221 msecs\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio\nenabled returning.\nSep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX\nCommand timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5\nmb[0-3]=[0xffff 0xffff 0xffff 0xffff]"
          },
          {
            "lang": "es",
            "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: scsi: qla2xxx: Reparar acceso prematuro a hardware despu\u00e9s de un error PCI Despu\u00e9s de que se haya detectado y recuperado un error PCI recuperable, el controlador qla necesita verificar si la condici\u00f3n de error a\u00fan persiste y/o esperar a que el SO d\u00e9 la se\u00f1al de reanudaci\u00f3n. 8 sep 22:26:03 kernel localhost: ADVERTENCIA: CPU: 9 PID: 124606 en qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] 8 sep 22:26:03 kernel localhost: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] 8 sep 22:26:03 kernel localhost: Rastreo de llamada: 8 sep 22:26:03 kernel localhost: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx] 8 sep 22:26:03 n\u00facleo localhost: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] 8 sep 22:26:03 n\u00facleo localhost: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] 8 sep 22:26:03 n\u00facleo localhost: ? qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] 8 sep 22:26:03 n\u00facleo localhost: ? report_mmio_enabled+0x44/0x80 8 sep 22:26:03 n\u00facleo localhost: ? report_slot_reset+0x80/0x80 8 sep 22:26:03 kernel localhost: ? pci_walk_bus+0x70/0x90 8 sep 22:26:03 kernel localhost: ? aer_dev_correctable_show+0xc0/0xc0 8 sep 22:26:03 kernel localhost: ? pcie_do_recovery+0x1bb/0x240 8 sep 22:26:03 kernel localhost: ? aer_recover_work_func+0xaa/0xd0 8 sep 22:26:03 kernel localhost: ? process_one_work+0x1a7/0x360 .. 8 sep 22:26:03 kernel localhost: qla2xxx [0000:42:00.2]-8041:22: se detect\u00f3 una desconexi\u00f3n de PCI. 8 sep 22:26:03 kernel localhost: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262: se produjo un error al volcar la memoria RAM de la placa base. \u00c1rea 5h inicio 198013h fin 198013h 8 sep 22:26:03 kernel localhost: qla2xxx [0000:42:00.2]-107ff:22: No se puede capturar el volcado de FW 8 sep 22:26:03 kernel localhost: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0, esper\u00f3 5221 msecs 8 sep 22:26:03 kernel localhost: qla2xxx [0000:42:00.2]-680d:22: mmio habilitado regresando. 8 de septiembre 22:26:03 kernel localhost: qla2xxx [0000:42:00.2]-d04c:22: Tiempo de espera del comando MBX para cmd 0, iocontrol=ffffffff jiffies=10140f2e5 mb[0-3]=[0xffff 0xffff 0xffff 0xffff]"
          }
        ],
        "id": "CVE-2022-49157",
        "lastModified": "2026-06-17T05:17:14.443",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 5.5,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 3.6,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2025-02-26T07:00:52.917",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/5ef6319f9882699613d5182fbd7929b017e8c5ab"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/6c125fd5ad035777f7b471553f7ddda76e8e7136"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/d7994dff9071555a959a168f9184dd9abae68a6b"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/e35920ab7874d5e2faeb4f958a74bfa793f1ce5a"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "NVD-CWE-noinfo"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-06-30T10:38:02+00:00",
      "cve": "CVE-2022-49157",
      "id": "CVE-2022-49157",
      "initial_release_date": "2022-01-01T00:00:00+00:00",
      "product_status:known_affected": "198",
      "product_status:known_not_affected": "76",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: scsi: qla2xxx: Fix premature hw access after PCI error",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2022/cve-2022-49157.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "low",
      "current_release_date": "2026-08-29T02:30:04Z",
      "cve": "CVE-2022-49157",
      "id": "CVE-2022-49157",
      "initial_release_date": "2025-02-27T03:11:23Z",
      "product_status:known_affected": "487",
      "product_status:known_not_affected": "166",
      "product_status:recommended": "319",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2022-49157",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2022-49157.json",
      "version": "68"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.


Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.