GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

CVE-2026-72178 (GCVE-0-2026-72178)

Vulnerability from cvelistv5 – Published: 2026-08-15 05:53 – Updated: 2026-08-17 05:09
VLAI
Title
mm/damon/core: always put unsuccessfully committed target pids
Summary
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: always put unsuccessfully committed target pids damon_commit_target() puts and gets the destination and the source target pids. It puts the destination target pid because it will be overwritten by the source target pid. It gets the source pid because the caller is supposed to eventually put the pids. In more detail, the caller will call damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source context. And in this case, [f]vaddr operation set's cleanup_target() callback will put the pids. The commit operation is made at the context level. The operation can fail in multiple places including in the middle and after the targets commit operations. For any such failures, immediately the error is returned to the damon_commit_ctx() caller. If some or all of the source target pids were committed to the destination during the unsuccessful context commit attempt, those pids should be put twice. The source context will do the put operations using the above explained routine. However, let's suppose the destination context was not originally using [f]vaddr operation set and the commit failed before the ops of the source context is committed. The destination does not have the cleanup_target() ops callback, so it cannot put the pids via the damon_destroy_ctx(). As a result, the pids are leaked. The issue in the real world would be not very common. The commit feature is for changing parameters of running DAMON context while inheriting internal status like the monitoring results. The monitoring results of a physical address range ain't have things that are beneficial to be inherited to a virtual address ranges monitoring. So the problem-causing DAMON control would be not very common in the real world. That said, it is a supported feature. And damon_commit_target() failure due to memory allocation is relatively realistic [1] if there are a huge number of target regions. Fix by putting the pids in the commit operation in case of the failures. The issue was discovered [2] by Sashiko.
Severity
No CVSS data available.
Assigner
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 83dc7bbaecae6e69e338355e9a137f0e7a0ecc40 , < ea07e045611ca00f1ec7e448fd43e655d311158b (git)
Affected: 83dc7bbaecae6e69e338355e9a137f0e7a0ecc40 , < 3b91c35961fa5553b4dd36db1f06e3b4acbfc05d (git)
Affected: 83dc7bbaecae6e69e338355e9a137f0e7a0ecc40 , < 837f619f1d98e967bd63e51ecd1e77bfa468992d (git)
Affected: 83dc7bbaecae6e69e338355e9a137f0e7a0ecc40 , < 6a66c557a2ab2609575bafd15e093669c05f9711 (git)
guessed Create a notification for this product.
Linux Linux Affected: 6.11
Unaffected: 0 , < 6.11 (semver)
Unaffected: 6.12.97 , ≤ 6.12.* (semver)
Unaffected: 6.18.40 , ≤ 6.18.* (semver)
Unaffected: 7.1.5 , ≤ 7.1.* (semver)
Unaffected: 7.2 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "mm/damon/core.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "ea07e045611ca00f1ec7e448fd43e655d311158b",
              "status": "affected",
              "version": "83dc7bbaecae6e69e338355e9a137f0e7a0ecc40",
              "versionType": "git"
            },
            {
              "lessThan": "3b91c35961fa5553b4dd36db1f06e3b4acbfc05d",
              "status": "affected",
              "version": "83dc7bbaecae6e69e338355e9a137f0e7a0ecc40",
              "versionType": "git"
            },
            {
              "lessThan": "837f619f1d98e967bd63e51ecd1e77bfa468992d",
              "status": "affected",
              "version": "83dc7bbaecae6e69e338355e9a137f0e7a0ecc40",
              "versionType": "git"
            },
            {
              "lessThan": "6a66c557a2ab2609575bafd15e093669c05f9711",
              "status": "affected",
              "version": "83dc7bbaecae6e69e338355e9a137f0e7a0ecc40",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "mm/damon/core.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.11"
            },
            {
              "lessThan": "6.11",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.97",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.40",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.5",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.97",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.40",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1.5",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmm/damon/core: always put unsuccessfully committed target pids\n\ndamon_commit_target() puts and gets the destination and the source target\npids.  It puts the destination target pid because it will be overwritten\nby the source target pid.  It gets the source pid because the caller is\nsupposed to eventually put the pids.  In more detail, the caller will call\ndamon_destroy_ctx() after damon_commit_ctx() to destroy the entire source\ncontext.  And in this case, [f]vaddr operation set\u0027s cleanup_target()\ncallback will put the pids.\n\nThe commit operation is made at the context level.  The operation can fail\nin multiple places including in the middle and after the targets commit\noperations.  For any such failures, immediately the error is returned to\nthe damon_commit_ctx() caller.  If some or all of the source target pids\nwere committed to the destination during the unsuccessful context commit\nattempt, those pids should be put twice.\n\nThe source context will do the put operations using the above explained\nroutine.  However, let\u0027s suppose the destination context was not\noriginally using [f]vaddr operation set and the commit failed before the\nops of the source context is committed.  The destination does not have the\ncleanup_target() ops callback, so it cannot put the pids via the\ndamon_destroy_ctx().\n\nAs a result, the pids are leaked.  The issue in the real world would be\nnot very common.  The commit feature is for changing parameters of running\nDAMON context while inheriting internal status like the monitoring\nresults.  The monitoring results of a physical address range ain\u0027t have\nthings that are beneficial to be inherited to a virtual address ranges\nmonitoring.  So the problem-causing DAMON control would be not very common\nin the real world.  That said, it is a supported feature.  And\ndamon_commit_target() failure due to memory allocation is relatively\nrealistic [1] if there are a huge number of target regions.\n\nFix by putting the pids in the commit operation in case of the failures.\n\nThe issue was discovered [2] by Sashiko."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-17T05:09:40.842Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/ea07e045611ca00f1ec7e448fd43e655d311158b"
        },
        {
          "url": "https://git.kernel.org/stable/c/3b91c35961fa5553b4dd36db1f06e3b4acbfc05d"
        },
        {
          "url": "https://git.kernel.org/stable/c/837f619f1d98e967bd63e51ecd1e77bfa468992d"
        },
        {
          "url": "https://git.kernel.org/stable/c/6a66c557a2ab2609575bafd15e093669c05f9711"
        }
      ],
      "title": "mm/damon/core: always put unsuccessfully committed target pids",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-72178",
    "datePublished": "2026-08-15T05:53:42.238Z",
    "dateReserved": "2026-08-09T03:40:39.910Z",
    "dateUpdated": "2026-08-17T05:09:40.842Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-72178",
      "date": "2026-09-11",
      "epss": "0.002",
      "percentile": "0.09912"
    },
    "nvd": "{\"cve\":{\"id\":\"CVE-2026-72178\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2026-08-15T06:21:36.047\",\"lastModified\":\"2026-08-17T06:18:18.313\",\"vulnStatus\":\"Received\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nmm/damon/core: always put unsuccessfully committed target pids\\n\\ndamon_commit_target() puts and gets the destination and the source target\\npids.  It puts the destination target pid because it will be overwritten\\nby the source target pid.  It gets the source pid because the caller is\\nsupposed to eventually put the pids.  In more detail, the caller will call\\ndamon_destroy_ctx() after damon_commit_ctx() to destroy the entire source\\ncontext.  And in this case, [f]vaddr operation set\u0027s cleanup_target()\\ncallback will put the pids.\\n\\nThe commit operation is made at the context level.  The operation can fail\\nin multiple places including in the middle and after the targets commit\\noperations.  For any such failures, immediately the error is returned to\\nthe damon_commit_ctx() caller.  If some or all of the source target pids\\nwere committed to the destination during the unsuccessful context commit\\nattempt, those pids should be put twice.\\n\\nThe source context will do the put operations using the above explained\\nroutine.  However, let\u0027s suppose the destination context was not\\noriginally using [f]vaddr operation set and the commit failed before the\\nops of the source context is committed.  The destination does not have the\\ncleanup_target() ops callback, so it cannot put the pids via the\\ndamon_destroy_ctx().\\n\\nAs a result, the pids are leaked.  The issue in the real world would be\\nnot very common.  The commit feature is for changing parameters of running\\nDAMON context while inheriting internal status like the monitoring\\nresults.  The monitoring results of a physical address range ain\u0027t have\\nthings that are beneficial to be inherited to a virtual address ranges\\nmonitoring.  So the problem-causing DAMON control would be not very common\\nin the real world.  That said, it is a supported feature.  And\\ndamon_commit_target() failure due to memory allocation is relatively\\nrealistic [1] if there are a huge number of target regions.\\n\\nFix by putting the pids in the commit operation in case of the failures.\\n\\nThe issue was discovered [2] by Sashiko.\"}],\"affected\":[{\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"affectedData\":[{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"unaffected\",\"programFiles\":[\"mm/damon/core.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"83dc7bbaecae6e69e338355e9a137f0e7a0ecc40\",\"lessThan\":\"ea07e045611ca00f1ec7e448fd43e655d311158b\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"83dc7bbaecae6e69e338355e9a137f0e7a0ecc40\",\"lessThan\":\"3b91c35961fa5553b4dd36db1f06e3b4acbfc05d\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"83dc7bbaecae6e69e338355e9a137f0e7a0ecc40\",\"lessThan\":\"837f619f1d98e967bd63e51ecd1e77bfa468992d\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"83dc7bbaecae6e69e338355e9a137f0e7a0ecc40\",\"lessThan\":\"6a66c557a2ab2609575bafd15e093669c05f9711\",\"versionType\":\"git\",\"status\":\"affected\"}]},{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"affected\",\"programFiles\":[\"mm/damon/core.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"6.11\",\"status\":\"affected\"},{\"version\":\"0\",\"lessThan\":\"6.11\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.12.97\",\"lessThanOrEqual\":\"6.12.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.18.40\",\"lessThanOrEqual\":\"6.18.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.1.5\",\"lessThanOrEqual\":\"7.1.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.2\",\"lessThanOrEqual\":\"*\",\"versionType\":\"original_commit_for_fix\",\"status\":\"unaffected\"}]}]}],\"metrics\":{},\"references\":[{\"url\":\"https://git.kernel.org/stable/c/3b91c35961fa5553b4dd36db1f06e3b4acbfc05d\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/6a66c557a2ab2609575bafd15e093669c05f9711\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/837f619f1d98e967bd63e51ecd1e77bfa468992d\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/ea07e045611ca00f1ec7e448fd43e655d311158b\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"}]}}",
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-08-31T15:08:09+00:00",
      "cve": "CVE-2026-72178",
      "id": "CVE-2026-72178",
      "initial_release_date": "2026-08-15T00:00:00+00:00",
      "product_status:known_affected": "76",
      "product_status:known_not_affected": "198",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: mm/damon/core: always put unsuccessfully committed target pids",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-72178.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-09-01T00:52:45Z",
      "cve": "CVE-2026-72178",
      "id": "CVE-2026-72178",
      "initial_release_date": "2026-09-01T00:52:45Z",
      "product_status:known_affected": "29",
      "product_status:known_not_affected": "333",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-72178",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2026-72178.json",
      "version": "2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.