{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-06T11:41:49.068Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_MISC",
              "x_transferred"
            ],
            "url": "https://ics-cert.us-cert.gov/advisories/ICSA-14-254-02"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Allen-Bradley MicroLogix 1400",
          "vendor": "Rockwell Automation",
          "versions": [
            {
              "lessThanOrEqual": "1766-Lxxxxx Series A FRN 7",
              "status": "affected",
              "version": "0",
              "versionType": "custom"
            },
            {
              "lessThanOrEqual": "1766-Lxxxxx Series B FRN 15.000",
              "status": "affected",
              "version": "0",
              "versionType": "custom"
            },
            {
              "status": "unaffected",
              "version": "Series B FRN 15.001 or higher"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Matthew Luallen of CYBATI"
        }
      ],
      "datePublic": "2014-09-30T06:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eThe DNP3 feature on Rockwell Automation Allen-Bradley MicroLogix 1400 1766-Lxxxxx A FRN controllers 7 and earlier and 1400 1766-Lxxxxx B FRN controllers before 15.001 allows remote attackers to cause a denial of service (process disruption) via malformed packets over (1) an Ethernet network or (2) a serial line.\u003c/p\u003e"
            }
          ],
          "value": "The DNP3 feature on Rockwell Automation Allen-Bradley MicroLogix 1400 1766-Lxxxxx A FRN controllers 7 and earlier and 1400 1766-Lxxxxx B FRN controllers before 15.001 allows remote attackers to cause a denial of service (process disruption) via malformed packets over (1) an Ethernet network or (2) a serial line."
        }
      ],
      "metrics": [
        {
          "cvssV2_0": {
            "accessComplexity": "MEDIUM",
            "accessVector": "NETWORK",
            "authentication": "NONE",
            "availabilityImpact": "COMPLETE",
            "baseScore": 7.1,
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "vectorString": "AV:N/AC:M/Au:N/C:N/I:N/A:C",
            "version": "2.0"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-20",
              "description": "CWE-20",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-11-04T22:30:19.113Z",
        "orgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
        "shortName": "icscert"
      },
      "references": [
        {
          "url": "https://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295"
        },
        {
          "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-14-254-02"
        },
        {
          "url": "https://github.com/cisagov/CSAF/blob/develop/csaf_files/OT/white/2014/icsa-14-254-02.json"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eRockwell Automation has released a new version of MicroLogix 1400 \nSeries B firmware to address the vulnerability and reduce associated \nrisk to successful exploitation. Subsequent versions of MicroLogix 1400 \nSeries B firmware and newer will incorporate these same enhancements.\u003c/p\u003e\n\u003cp\u003eRockwell Automation recommends the following immediate mitigation \nstrategies (when possible, multiple strategies should be employed \nsimultaneously):\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrade all MicroLogix 1400 Series B controllers to Series B FRN \n15.001 or higher. Current firmware for the MicroLogix 1400 Series B \nplatform can be obtained at the following web address:\u003c/li\u003e\n\u003c/ul\u003e\n\u003cp\u003e\u003ca target=\"_blank\" rel=\"nofollow\" href=\"http://www.rockwellautomation.com/rockwellautomation/support/pcdc.page\"\u003ehttp://www.rockwellautomation.com/rockwellautomation/support/pcdc.page\u003c/a\u003e\u003c/p\u003e\n\n\n\u003cp\u003ePlease refer to Rockwell Automation\u2019s product disclosure (AID 620295) for more information on this topic available at:\u003c/p\u003e\n\u003cp\u003e\u003ca target=\"_blank\" rel=\"nofollow\" href=\"https://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295\"\u003ehttps://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295\u003c/a\u003e\u003c/p\u003e\n\n\u003cbr\u003e"
            }
          ],
          "value": "Rockwell Automation has released a new version of MicroLogix 1400 \nSeries B firmware to address the vulnerability and reduce associated \nrisk to successful exploitation. Subsequent versions of MicroLogix 1400 \nSeries B firmware and newer will incorporate these same enhancements.\n\n\nRockwell Automation recommends the following immediate mitigation \nstrategies (when possible, multiple strategies should be employed \nsimultaneously):\n\n\n\n  *  Upgrade all MicroLogix 1400 Series B controllers to Series B FRN \n15.001 or higher. Current firmware for the MicroLogix 1400 Series B \nplatform can be obtained at the following web address:\n\n\n\n\n http://www.rockwellautomation.com/rockwellautomation/support/pcdc.page \n\n\n\n\nPlease refer to Rockwell Automation\u2019s product disclosure (AID 620295) for more information on this topic available at:\n\n\n https://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295"
        }
      ],
      "source": {
        "advisory": "ICSA-14-254-02",
        "discovery": "EXTERNAL"
      },
      "title": "Rockwell Automation Micrologix 1400 Improper Input Validation",
      "workarounds": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eUsers with Series A and Series B controllers are also recommended to apply the following risk mitigations:\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not enable DNP3 communication in the product unless required.\u003c/li\u003e\n\u003cli\u003eWhere appropriate, prohibit DNP3 communication that originates \noutside the perimeter of the manufacturing zone from entry into the zone\n by blocking communication directed at Ethernet communication Port \n20000/TCP* and 20000/UDP* using appropriate security technology (e.g., a\n firewall, UTM devices, or other security appliance)\u003c/li\u003e\n\u003c/ul\u003e\n\u003cp\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; *Note: Ports 20000/TCP and 20000/UDP are factory defaults \nas per the DNP3 specification but can be reconfigured by the product \nowner.\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmploy firewalls with ingress/egress filtering, intrusion \ndetection/prevention systems, and validate all configurations. Evaluate \nfirewall configurations to ensure other appropriate inbound and outbound\n traffic is blocked.\u003c/li\u003e\n\u003cli\u003eRestrict physical and electronic access to automation products, \nnetworks, and systems to only those individuals authorized to be in \ncontact with control system equipment.\u003c/li\u003e\u003cli\u003eEmploy layered security, defense-in-depth methods and network \nsegregation and segmentation practices in system design to restrict and \ncontrol access to individual products and control networks. Refer to \u003ca target=\"_blank\" rel=\"nofollow\" href=\"http://www.ab.com/networks/architectures.html%20\"\u003ehttp://www.ab.com/networks/architectures.html\u003c/a\u003e\u0026nbsp;for comprehensive information about implementing validated architectures designed to deliver these measures.\u003c/li\u003e\n\u003c/ul\u003e\n\u003cp\u003ePlease refer to Rockwell Automation\u2019s product disclosure (AID 620295) for more information on this topic available at:\u003c/p\u003e\n\u003cp\u003e\u003ca target=\"_blank\" rel=\"nofollow\" href=\"https://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295\"\u003ehttps://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295\u003c/a\u003e\u003c/p\u003e\n\n\u003cbr\u003e"
            }
          ],
          "value": "Users with Series A and Series B controllers are also recommended to apply the following risk mitigations:\n\n\n\n  *  Do not enable DNP3 communication in the product unless required.\n\n  *  Where appropriate, prohibit DNP3 communication that originates \noutside the perimeter of the manufacturing zone from entry into the zone\n by blocking communication directed at Ethernet communication Port \n20000/TCP* and 20000/UDP* using appropriate security technology (e.g., a\n firewall, UTM devices, or other security appliance)\n\n\n\n\n\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 *Note: Ports 20000/TCP and 20000/UDP are factory defaults \nas per the DNP3 specification but can be reconfigured by the product \nowner.\n\n\n\n  *  Employ firewalls with ingress/egress filtering, intrusion \ndetection/prevention systems, and validate all configurations. Evaluate \nfirewall configurations to ensure other appropriate inbound and outbound\n traffic is blocked.\n\n  *  Restrict physical and electronic access to automation products, \nnetworks, and systems to only those individuals authorized to be in \ncontact with control system equipment.\n  *  Employ layered security, defense-in-depth methods and network \nsegregation and segmentation practices in system design to restrict and \ncontrol access to individual products and control networks. Refer to  http://www.ab.com/networks/architectures.html http://www.ab.com/networks/architectures.html%20 \u00a0for comprehensive information about implementing validated architectures designed to deliver these measures.\n\n\n\n\nPlease refer to Rockwell Automation\u2019s product disclosure (AID 620295) for more information on this topic available at:\n\n\n https://rockwellautomation.custhelp.com/app/answers/detail/a_id/620295"
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.5.0"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "ics-cert@hq.dhs.gov",
          "ID": "CVE-2014-5410",
          "STATE": "PUBLIC"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "n/a",
                      "version": {
                        "version_data": [
                          {
                            "version_value": "n/a"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "n/a"
              }
            ]
          }
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "The DNP3 feature on Rockwell Automation Allen-Bradley MicroLogix 1400 1766-Lxxxxx A FRN controllers 7 and earlier and 1400 1766-Lxxxxx B FRN controllers before 15.001 allows remote attackers to cause a denial of service (process disruption) via malformed packets over (1) an Ethernet network or (2) a serial line."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "n/a"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://ics-cert.us-cert.gov/advisories/ICSA-14-254-02",
              "refsource": "MISC",
              "url": "https://ics-cert.us-cert.gov/advisories/ICSA-14-254-02"
            }
          ]
        }
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
    "assignerShortName": "icscert",
    "cveId": "CVE-2014-5410",
    "datePublished": "2014-10-03T18:00:00",
    "dateReserved": "2014-08-22T00:00:00",
    "dateUpdated": "2025-11-04T22:30:19.113Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}