CVE-2023-53583 (GCVE-0-2023-53583)
Vulnerability from cvelistv5
Published
2025-10-04 15:43
Modified
2025-10-04 15:43
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start() Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the perf_sample_event_took() function was added to report time spent in overflow interrupts. If the interrupt takes too long, the perf framework will lower the sysctl_perf_event_sample_rate and max_samples_per_tick. When hwc->interrupts is larger than max_samples_per_tick, the hwc->interrupts will be set to MAX_INTERRUPTS, and events will be throttled within the __perf_event_account_interrupt() function. However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler() function to avoid throttling. When the perf framework unthrottled the event in the timer interrupt handler, it triggers riscv_pmu_start() function and causes a WARN_ON_ONCE() warning, as shown below: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e Modules linked in: CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1 Hardware name: SiFive (DT) epc : riscv_pmu_start+0x7c/0x8e ra : riscv_pmu_start+0x28/0x8e epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0 gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0 t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720 s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000 a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030 s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00 s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000 s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340 s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796 t5 : 0000000700000000 t6 : ffffaf8005269870 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e [<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174 [<ffffffff80188642>] perf_event_task_tick+0x88/0x9c [<ffffffff800626a8>] scheduler_tick+0xfe/0x27c [<ffffffff800b5640>] update_process_times+0x9a/0xba [<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66 [<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0 [<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4 [<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe [<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42 [<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2 [<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36 After referring other PMU drivers like Arm, Loongarch, Csky, and Mips, they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag after perf_event_overflow() function nor do they add PERF_HES_STOPPED flag checking in *_pmu_start() which don't cause this warning. Thus, it's recommended to remove this unnecessary check in riscv_pmu_start() function to prevent this warning.
References
Impacted products
Vendor Product Version
Linux Linux Version: 096b52fd2bb4996fd68d22b3b7ad21a1296db9d3
Version: 096b52fd2bb4996fd68d22b3b7ad21a1296db9d3
Version: 096b52fd2bb4996fd68d22b3b7ad21a1296db9d3
 Create a notification for this product.
Show details on NVD website

To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/perf/riscv_pmu.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "aeb62beaf9cbd0a72e7f97c9af6d3e7f76ce2946",
              "status": "affected",
              "version": "096b52fd2bb4996fd68d22b3b7ad21a1296db9d3",
              "versionType": "git"
            },
            {
              "lessThan": "8270d539a943d00cf6a094da0073e2b5972b641d",
              "status": "affected",
              "version": "096b52fd2bb4996fd68d22b3b7ad21a1296db9d3",
              "versionType": "git"
            },
            {
              "lessThan": "66843b14fb71825fdd73ab12f6594f2243b402be",
              "status": "affected",
              "version": "096b52fd2bb4996fd68d22b3b7ad21a1296db9d3",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/perf/riscv_pmu.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.1"
            },
            {
              "lessThan": "6.1",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.40",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.4.*",
              "status": "unaffected",
              "version": "6.4.5",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.5",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.40",
                  "versionStartIncluding": "6.1",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.4.5",
                  "versionStartIncluding": "6.1",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.5",
                  "versionStartIncluding": "6.1",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nperf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()\n\nSince commit 096b52fd2bb4 (\"perf: RISC-V: throttle perf events\") the\nperf_sample_event_took() function was added to report time spent in\noverflow interrupts. If the interrupt takes too long, the perf framework\nwill lower the sysctl_perf_event_sample_rate and max_samples_per_tick.\nWhen hwc-\u003einterrupts is larger than max_samples_per_tick, the\nhwc-\u003einterrupts will be set to MAX_INTERRUPTS, and events will be\nthrottled within the __perf_event_account_interrupt() function.\n\nHowever, the RISC-V PMU driver doesn\u0027t call riscv_pmu_stop() to update the\nPERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()\nfunction to avoid throttling. When the perf framework unthrottled the event\nin the timer interrupt handler, it triggers riscv_pmu_start() function\nand causes a WARN_ON_ONCE() warning, as shown below:\n\n ------------[ cut here ]------------\n WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e\n Modules linked in:\n CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1\n Hardware name: SiFive (DT)\n epc : riscv_pmu_start+0x7c/0x8e\n  ra : riscv_pmu_start+0x28/0x8e\n epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0\n  gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0\n  t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720\n  s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000\n  a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000\n  a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030\n  s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00\n  s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000\n  s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340\n  s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796\n  t5 : 0000000700000000 t6 : ffffaf8005269870\n status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003\n [\u003cffffffff80aef864\u003e] riscv_pmu_start+0x7c/0x8e\n [\u003cffffffff80185b56\u003e] perf_adjust_freq_unthr_context+0x15e/0x174\n [\u003cffffffff80188642\u003e] perf_event_task_tick+0x88/0x9c\n [\u003cffffffff800626a8\u003e] scheduler_tick+0xfe/0x27c\n [\u003cffffffff800b5640\u003e] update_process_times+0x9a/0xba\n [\u003cffffffff800c5bd4\u003e] tick_sched_handle+0x32/0x66\n [\u003cffffffff800c5e0c\u003e] tick_sched_timer+0x64/0xb0\n [\u003cffffffff800b5e50\u003e] __hrtimer_run_queues+0x156/0x2f4\n [\u003cffffffff800b6bdc\u003e] hrtimer_interrupt+0xe2/0x1fe\n [\u003cffffffff80acc9e8\u003e] riscv_timer_interrupt+0x38/0x42\n [\u003cffffffff80090a16\u003e] handle_percpu_devid_irq+0x90/0x1d2\n [\u003cffffffff8008a9f4\u003e] generic_handle_domain_irq+0x28/0x36\n\nAfter referring other PMU drivers like Arm, Loongarch, Csky, and Mips,\nthey don\u0027t call *_pmu_stop() to update with PERF_HES_STOPPED flag\nafter perf_event_overflow() function nor do they add PERF_HES_STOPPED\nflag checking in *_pmu_start() which don\u0027t cause this warning.\n\nThus, it\u0027s recommended to remove this unnecessary check in\nriscv_pmu_start() function to prevent this warning."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-10-04T15:43:59.154Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/aeb62beaf9cbd0a72e7f97c9af6d3e7f76ce2946"
        },
        {
          "url": "https://git.kernel.org/stable/c/8270d539a943d00cf6a094da0073e2b5972b641d"
        },
        {
          "url": "https://git.kernel.org/stable/c/66843b14fb71825fdd73ab12f6594f2243b402be"
        }
      ],
      "title": "perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2023-53583",
    "datePublished": "2025-10-04T15:43:59.154Z",
    "dateReserved": "2025-10-04T15:40:38.477Z",
    "dateUpdated": "2025-10-04T15:43:59.154Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1",
  "vulnerability-lookup:meta": {
    "nvd": "{\"cve\":{\"id\":\"CVE-2023-53583\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2025-10-04T16:15:54.090\",\"lastModified\":\"2025-10-06T14:56:21.733\",\"vulnStatus\":\"Awaiting Analysis\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nperf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()\\n\\nSince commit 096b52fd2bb4 (\\\"perf: RISC-V: throttle perf events\\\") the\\nperf_sample_event_took() function was added to report time spent in\\noverflow interrupts. If the interrupt takes too long, the perf framework\\nwill lower the sysctl_perf_event_sample_rate and max_samples_per_tick.\\nWhen hwc-\u003einterrupts is larger than max_samples_per_tick, the\\nhwc-\u003einterrupts will be set to MAX_INTERRUPTS, and events will be\\nthrottled within the __perf_event_account_interrupt() function.\\n\\nHowever, the RISC-V PMU driver doesn\u0027t call riscv_pmu_stop() to update the\\nPERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()\\nfunction to avoid throttling. When the perf framework unthrottled the event\\nin the timer interrupt handler, it triggers riscv_pmu_start() function\\nand causes a WARN_ON_ONCE() warning, as shown below:\\n\\n ------------[ cut here ]------------\\n WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e\\n Modules linked in:\\n CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1\\n Hardware name: SiFive (DT)\\n epc : riscv_pmu_start+0x7c/0x8e\\n  ra : riscv_pmu_start+0x28/0x8e\\n epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0\\n  gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0\\n  t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720\\n  s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000\\n  a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000\\n  a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030\\n  s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00\\n  s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000\\n  s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340\\n  s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796\\n  t5 : 0000000700000000 t6 : ffffaf8005269870\\n status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003\\n [\u003cffffffff80aef864\u003e] riscv_pmu_start+0x7c/0x8e\\n [\u003cffffffff80185b56\u003e] perf_adjust_freq_unthr_context+0x15e/0x174\\n [\u003cffffffff80188642\u003e] perf_event_task_tick+0x88/0x9c\\n [\u003cffffffff800626a8\u003e] scheduler_tick+0xfe/0x27c\\n [\u003cffffffff800b5640\u003e] update_process_times+0x9a/0xba\\n [\u003cffffffff800c5bd4\u003e] tick_sched_handle+0x32/0x66\\n [\u003cffffffff800c5e0c\u003e] tick_sched_timer+0x64/0xb0\\n [\u003cffffffff800b5e50\u003e] __hrtimer_run_queues+0x156/0x2f4\\n [\u003cffffffff800b6bdc\u003e] hrtimer_interrupt+0xe2/0x1fe\\n [\u003cffffffff80acc9e8\u003e] riscv_timer_interrupt+0x38/0x42\\n [\u003cffffffff80090a16\u003e] handle_percpu_devid_irq+0x90/0x1d2\\n [\u003cffffffff8008a9f4\u003e] generic_handle_domain_irq+0x28/0x36\\n\\nAfter referring other PMU drivers like Arm, Loongarch, Csky, and Mips,\\nthey don\u0027t call *_pmu_stop() to update with PERF_HES_STOPPED flag\\nafter perf_event_overflow() function nor do they add PERF_HES_STOPPED\\nflag checking in *_pmu_start() which don\u0027t cause this warning.\\n\\nThus, it\u0027s recommended to remove this unnecessary check in\\nriscv_pmu_start() function to prevent this warning.\"}],\"metrics\":{},\"references\":[{\"url\":\"https://git.kernel.org/stable/c/66843b14fb71825fdd73ab12f6594f2243b402be\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/8270d539a943d00cf6a094da0073e2b5972b641d\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/aeb62beaf9cbd0a72e7f97c9af6d3e7f76ce2946\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"}]}}"
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.