CVE-2022-49543 (GCVE-0-2022-49543)
Vulnerability from cvelistv5
Published
2025-02-26 02:13
Modified
2025-05-04 08:40
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: ath11k: fix the warning of dev_wake in mhi_pm_disable_transition() When test device recovery with below command, it has warning in message as below. echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash warning message: [ 1965.642121] ath11k_pci 0000:06:00.0: simulating firmware assert crash [ 1968.471364] ieee80211 phy0: Hardware restart was requested [ 1968.511305] ------------[ cut here ]------------ [ 1968.511368] WARNING: CPU: 3 PID: 1546 at drivers/bus/mhi/core/pm.c:505 mhi_pm_disable_transition+0xb37/0xda0 [mhi] [ 1968.511443] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr nvme nvme_core [ 1968.511563] CPU: 3 PID: 1546 Comm: kworker/u17:0 Kdump: loaded Tainted: G W 5.17.0-rc3-wt-ath+ #579 [ 1968.511629] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 1968.511704] Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi] [ 1968.511787] RIP: 0010:mhi_pm_disable_transition+0xb37/0xda0 [mhi] [ 1968.511870] Code: a9 fe ff ff 4c 89 ff 44 89 04 24 e8 03 46 f6 e5 44 8b 04 24 41 83 f8 01 0f 84 21 fe ff ff e9 4c fd ff ff 0f 0b e9 af f8 ff ff <0f> 0b e9 5c f8 ff ff 48 89 df e8 da 9e ee e3 e9 12 fd ff ff 4c 89 [ 1968.511923] RSP: 0018:ffffc900024efbf0 EFLAGS: 00010286 [ 1968.511969] RAX: 00000000ffffffff RBX: ffff88811d241250 RCX: ffffffffc0176922 [ 1968.512014] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff888118a90a24 [ 1968.512059] RBP: ffff888118a90800 R08: 0000000000000000 R09: ffff888118a90a27 [ 1968.512102] R10: ffffed1023152144 R11: 0000000000000001 R12: ffff888118a908ac [ 1968.512229] R13: ffff888118a90928 R14: dffffc0000000000 R15: ffff888118a90a24 [ 1968.512310] FS: 0000000000000000(0000) GS:ffff888234200000(0000) knlGS:0000000000000000 [ 1968.512405] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1968.512493] CR2: 00007f5538f443a8 CR3: 000000016dc28001 CR4: 00000000003706e0 [ 1968.512587] Call Trace: [ 1968.512672] <TASK> [ 1968.512751] ? _raw_spin_unlock_irq+0x1f/0x40 [ 1968.512859] mhi_pm_st_worker+0x3ac/0x790 [mhi] [ 1968.512959] ? mhi_pm_mission_mode_transition.isra.0+0x7d0/0x7d0 [mhi] [ 1968.513063] process_one_work+0x86a/0x1400 [ 1968.513184] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1968.513312] ? move_linked_works+0x125/0x290 [ 1968.513416] worker_thread+0x6db/0xf60 [ 1968.513536] ? process_one_work+0x1400/0x1400 [ 1968.513627] kthread+0x241/0x2d0 [ 1968.513733] ? kthread_complete_and_exit+0x20/0x20 [ 1968.513821] ret_from_fork+0x22/0x30 [ 1968.513924] </TASK> Reason is mhi_deassert_dev_wake() from mhi_device_put() is called but mhi_assert_dev_wake() from __mhi_device_get_sync() is not called in progress of recovery. Commit 8e0559921f9a ("bus: mhi: core: Skip device wake in error or shutdown state") add check for the pm_state of mhi in __mhi_device_get_sync(), and the pm_state is not the normal state untill recovery is completed, so it leads the dev_wake is not 0 and above warning print in mhi_pm_disable_transition() while checking mhi_cntrl->dev_wake. Add check in ath11k_pci_write32()/ath11k_pci_read32() to skip call mhi_device_put() if mhi_device_get_sync() does not really do wake, then the warning gone. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
References
https://git.kernel.org/stable/c/5f18206cddae033c488e4879f198699092ca0524
https://git.kernel.org/stable/c/a2d9b7357469949ad02f511fc69f8fa3a1afbf89
https://git.kernel.org/stable/c/0d7a8a6204ea9271f1d0a8c66a9fd2f54d2e3cbc
Impacted products
Vendor Product Version
Linux Linux Version: d5c65159f2895379e11ca13f62feabe93278985d
Version: d5c65159f2895379e11ca13f62feabe93278985d
Version: d5c65159f2895379e11ca13f62feabe93278985d
 Create a notification for this product.
   Linux Linux Version: 5.6
 Create a notification for this product.
Show details on NVD website

To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/wireless/ath/ath11k/pci.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "5f18206cddae033c488e4879f198699092ca0524",
              "status": "affected",
              "version": "d5c65159f2895379e11ca13f62feabe93278985d",
              "versionType": "git"
            },
            {
              "lessThan": "a2d9b7357469949ad02f511fc69f8fa3a1afbf89",
              "status": "affected",
              "version": "d5c65159f2895379e11ca13f62feabe93278985d",
              "versionType": "git"
            },
            {
              "lessThan": "0d7a8a6204ea9271f1d0a8c66a9fd2f54d2e3cbc",
              "status": "affected",
              "version": "d5c65159f2895379e11ca13f62feabe93278985d",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/wireless/ath/ath11k/pci.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.6"
            },
            {
              "lessThan": "5.6",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.17.*",
              "status": "unaffected",
              "version": "5.17.14",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.18.*",
              "status": "unaffected",
              "version": "5.18.3",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "5.19",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.17.14",
                  "versionStartIncluding": "5.6",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.18.3",
                  "versionStartIncluding": "5.6",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.19",
                  "versionStartIncluding": "5.6",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nath11k: fix the warning of dev_wake in mhi_pm_disable_transition()\n\nWhen test device recovery with below command, it has warning in message\nas below.\necho assert \u003e /sys/kernel/debug/ath11k/wcn6855\\ hw2.0/simulate_fw_crash\necho assert \u003e /sys/kernel/debug/ath11k/qca6390\\ hw2.0/simulate_fw_crash\n\nwarning message:\n[ 1965.642121] ath11k_pci 0000:06:00.0: simulating firmware assert crash\n[ 1968.471364] ieee80211 phy0: Hardware restart was requested\n[ 1968.511305] ------------[ cut here ]------------\n[ 1968.511368] WARNING: CPU: 3 PID: 1546 at drivers/bus/mhi/core/pm.c:505 mhi_pm_disable_transition+0xb37/0xda0 [mhi]\n[ 1968.511443] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr nvme nvme_core\n[ 1968.511563] CPU: 3 PID: 1546 Comm: kworker/u17:0 Kdump: loaded Tainted: G        W         5.17.0-rc3-wt-ath+ #579\n[ 1968.511629] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021\n[ 1968.511704] Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi]\n[ 1968.511787] RIP: 0010:mhi_pm_disable_transition+0xb37/0xda0 [mhi]\n[ 1968.511870] Code: a9 fe ff ff 4c 89 ff 44 89 04 24 e8 03 46 f6 e5 44 8b 04 24 41 83 f8 01 0f 84 21 fe ff ff e9 4c fd ff ff 0f 0b e9 af f8 ff ff \u003c0f\u003e 0b e9 5c f8 ff ff 48 89 df e8 da 9e ee e3 e9 12 fd ff ff 4c 89\n[ 1968.511923] RSP: 0018:ffffc900024efbf0 EFLAGS: 00010286\n[ 1968.511969] RAX: 00000000ffffffff RBX: ffff88811d241250 RCX: ffffffffc0176922\n[ 1968.512014] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff888118a90a24\n[ 1968.512059] RBP: ffff888118a90800 R08: 0000000000000000 R09: ffff888118a90a27\n[ 1968.512102] R10: ffffed1023152144 R11: 0000000000000001 R12: ffff888118a908ac\n[ 1968.512229] R13: ffff888118a90928 R14: dffffc0000000000 R15: ffff888118a90a24\n[ 1968.512310] FS:  0000000000000000(0000) GS:ffff888234200000(0000) knlGS:0000000000000000\n[ 1968.512405] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n[ 1968.512493] CR2: 00007f5538f443a8 CR3: 000000016dc28001 CR4: 00000000003706e0\n[ 1968.512587] Call Trace:\n[ 1968.512672]  \u003cTASK\u003e\n[ 1968.512751]  ? _raw_spin_unlock_irq+0x1f/0x40\n[ 1968.512859]  mhi_pm_st_worker+0x3ac/0x790 [mhi]\n[ 1968.512959]  ? mhi_pm_mission_mode_transition.isra.0+0x7d0/0x7d0 [mhi]\n[ 1968.513063]  process_one_work+0x86a/0x1400\n[ 1968.513184]  ? pwq_dec_nr_in_flight+0x230/0x230\n[ 1968.513312]  ? move_linked_works+0x125/0x290\n[ 1968.513416]  worker_thread+0x6db/0xf60\n[ 1968.513536]  ? process_one_work+0x1400/0x1400\n[ 1968.513627]  kthread+0x241/0x2d0\n[ 1968.513733]  ? kthread_complete_and_exit+0x20/0x20\n[ 1968.513821]  ret_from_fork+0x22/0x30\n[ 1968.513924]  \u003c/TASK\u003e\n\nReason is mhi_deassert_dev_wake() from mhi_device_put() is called\nbut mhi_assert_dev_wake() from __mhi_device_get_sync() is not called\nin progress of recovery. Commit 8e0559921f9a (\"bus: mhi: core:\nSkip device wake in error or shutdown state\") add check for the\npm_state of mhi in __mhi_device_get_sync(), and the pm_state is not\nthe normal state untill recovery is completed, so it leads the\ndev_wake is not 0 and above warning print in mhi_pm_disable_transition()\nwhile checking mhi_cntrl-\u003edev_wake.\n\nAdd check in ath11k_pci_write32()/ath11k_pci_read32() to skip call\nmhi_device_put() if mhi_device_get_sync() does not really do wake,\nthen the warning gone.\n\nTested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-05-04T08:40:11.855Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/5f18206cddae033c488e4879f198699092ca0524"
        },
        {
          "url": "https://git.kernel.org/stable/c/a2d9b7357469949ad02f511fc69f8fa3a1afbf89"
        },
        {
          "url": "https://git.kernel.org/stable/c/0d7a8a6204ea9271f1d0a8c66a9fd2f54d2e3cbc"
        }
      ],
      "title": "ath11k: fix the warning of dev_wake in mhi_pm_disable_transition()",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2022-49543",
    "datePublished": "2025-02-26T02:13:57.422Z",
    "dateReserved": "2025-02-26T02:08:31.589Z",
    "dateUpdated": "2025-05-04T08:40:11.855Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.