cisco-sa-ise-sec-atk-dos-zw5rcuyp
Vulnerability from csaf_cisco
Published
2022-11-02 16:00
Modified
2022-11-02 16:00
Summary
Cisco Identity Services Engine Software Resource Exhaustion Vulnerability

Notes

Summary
A vulnerability in a feature that monitors RADIUS requests on Cisco Identity Services Engine (ISE) Software could allow an unauthenticated, remote attacker to negatively affect the performance of an affected device. This vulnerability is due to insufficient management of system resources. An attacker could exploit this vulnerability by taking actions that cause Cisco ISE Software to receive specific RADIUS traffic. A successful and sustained exploit of this vulnerability could allow the attacker to cause reduced performance of the affected device, resulting in significant delays to RADIUS authentications. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.
Vulnerable Products
At the time of publication, this vulnerability affected Cisco ISE Software if the software was configured to detect a steady, high rate of RADIUS requests. This configuration is disabled by default. For information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software ["#fs"] section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information. Determine the Device Configuration To determine if a device is vulnerable, log in to the web management GUI with super admin privileges. Choose Administration > System > Settings > Protocols > RADIUS. If Detect High Rate of RADIUS Requests is checked, the device is vulnerable.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Workarounds
As a workaround, customers who do not require the detection of a steady, high rate of RADIUS requests for their daily operations may disable the detection to prevent the exploitation of this vulnerability. To disable this feature, log in to the web management GUI with super admin privileges. Choose Administration > System > Settings > Protocols > RADIUS and uncheck Detect High Rate of RADIUS Requests. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Fixed Software
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Fixed Releases At the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information. The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability. Cisco ISE Software Release First Fixed Release 2.61 and earlier Migrate to a fixed release. 2.7 2.7 patch 8 3.0 3.0 patch 6 3.1 3.1 patch 4 3.2 Not vulnerable. 1. Cisco ISE Software Release 2.4 has reached End of Software Maintenance ["https://www.cisco.com/c/en/us/products/eos-eol-listing.html"]. Customers are advised to migrate to a supported release that includes the fix for this vulnerability. For instructions on upgrading, see the Upgrade Guides on the Cisco Identity Service Engine ["https://www.cisco.com/c/en/us/support/security/identity-services-engine/series.html"] support page. The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during the resolution of a Cisco TAC support case.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.



{
  "document": {
    "acknowledgments": [
      {
        "summary": "This vulnerability was found during the resolution of a Cisco TAC support case."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "A vulnerability in a feature that monitors RADIUS requests on Cisco Identity Services Engine (ISE) Software could allow an unauthenticated, remote attacker to negatively affect the performance of an affected device.\r\n\r\nThis vulnerability is due to insufficient management of system resources. An attacker could exploit this vulnerability by taking actions that cause Cisco ISE Software to receive specific RADIUS traffic. A successful and sustained exploit of this vulnerability could allow the attacker to cause reduced performance of the affected device, resulting in significant delays to RADIUS authentications.\r\n\r\nCisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.\r\n\r\n",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "At the time of publication, this vulnerability affected Cisco ISE Software if the software was configured to detect a steady, high rate of RADIUS requests. This configuration is disabled by default.\r\n\r\nFor information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software [\"#fs\"] section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.\r\n  Determine the Device Configuration\r\nTo determine if a device is vulnerable, log in to the web management GUI with super admin privileges. Choose Administration \u003e System \u003e Settings \u003e Protocols \u003e RADIUS. If Detect High Rate of RADIUS Requests is checked, the device is vulnerable.",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "As a workaround, customers who do not require the detection of a steady, high rate of RADIUS requests for their daily operations may disable the detection to prevent the exploitation of this vulnerability. To disable this feature, log in to the web management GUI with super admin privileges. Choose Administration \u003e System \u003e Settings \u003e Protocols \u003e RADIUS and uncheck Detect High Rate of RADIUS Requests.\r\n\r\nWhile this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "When considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n      Fixed Releases\r\nAt the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.\r\n\r\nThe left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability.\r\n        Cisco ISE Software Release  First Fixed Release          2.61 and earlier  Migrate to a fixed release.      2.7  2.7 patch 8      3.0  3.0 patch 6      3.1  3.1 patch 4      3.2  Not vulnerable.\r\n1. Cisco ISE Software Release 2.4 has reached End of Software Maintenance [\"https://www.cisco.com/c/en/us/products/eos-eol-listing.html\"]. Customers are advised to migrate to a supported release that includes the fix for this vulnerability.\r\nFor instructions on upgrading, see the Upgrade Guides on the Cisco Identity Service Engine [\"https://www.cisco.com/c/en/us/support/security/identity-services-engine/series.html\"] support page.\r\n\r\nThe Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "This vulnerability was found during the resolution of a Cisco TAC support case.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "psirt@cisco.com",
      "issuing_authority": "Cisco PSIRT",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco Identity Services Engine Software Resource Exhaustion Vulnerability",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-sec-atk-dos-zw5RCUYp"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "End of Software Maintenance",
        "url": "https://www.cisco.com/c/en/us/products/eos-eol-listing.html"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Identity Service Engine",
        "url": "https://www.cisco.com/c/en/us/support/security/identity-services-engine/series.html"
      }
    ],
    "title": "Cisco Identity Services Engine Software Resource Exhaustion Vulnerability",
    "tracking": {
      "current_release_date": "2022-11-02T16:00:00+00:00",
      "generator": {
        "date": "2024-05-10T23:19:59+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-ise-sec-atk-dos-zw5RCUYp",
      "initial_release_date": "2022-11-02T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2022-11-02T15:47:17+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco Identity Services Engine Software",
            "product": {
              "name": "Cisco Identity Services Engine Software ",
              "product_id": "CSAFPID-111903"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-20937",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvz99311"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-111903"
        ]
      },
      "release_date": "2022-11-02T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-111903"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-111903"
          ]
        }
      ],
      "title": "Cisco Identity Services Engine Authentication Security Attack Detector Denial of Service Vulnerability"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.