cisco-sa-20190515-pi-rce
Vulnerability from csaf_cisco
Published
2019-05-15 16:00
Modified
2019-05-15 22:58
Summary
Cisco Prime Infrastructure and Evolved Programmable Network Manager Remote Code Execution Vulnerabilities

Notes

Summary
Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow a remote attacker to gain the ability to execute arbitrary code with elevated privileges on the underlying operating system. One of these issues, CVE-2019-1821, can be exploited by an unauthenticated attacker that has network access to the affected administrative interface. The second and third issues, CVE-2019-1822 and CVE-2019-1823, require that an attacker have valid credentials to authenticate to the impacted administrative interface. These vulnerabilities exist because the software improperly validates user-supplied input. An attacker could exploit these vulnerabilities by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce"]
Vulnerable Products
These vulnerabilities affect Cisco PI Software Releases prior to 3.4.1, 3.5, and 3.6, and EPN Manager Releases prior to 3.0.1. Determining the PI Software Release The administrator can view the PI software release in three ways: The administrator can issue the show version command from the console CLI. The following output is from an affected application that is running PI Software Release 3.3.0: piconsole# show version Cisco Application Deployment Engine OS Release: 3.1 ADE-OS Build Version: 3.1.0.001 ADE-OS System Architecture: x86_64 Copyright (c) 2009-2017 by Cisco Systems, Inc. All rights reserved. Hostname: XXXXXXXXX Version information of installed applications --------------------------------------------- Cisco Prime Infrastructure ******************************************************** Version : 3.3.0 Build : 3.3.0.0.342 The administrator can view the PI release and maintenance release updates by connecting to the web interface using the http(s)://<system-ip> access URL. The PI software release is displayed on the welcome screen. The following is an example of text that is displayed in the pop-up window for PI Software Release 3.3: Cisco Prime Infrastructure Version 3.3 View Installed Update The administrator can also view the PI release and maintenance releases by logging in to the web interface using the http(s)://<system-ip> access URL and choosing Gear > About Prime Infrastructure. Determining the EPN Manager Software Release The administrator can log in to the web GUI to view the software updates in three ways: Click the View Installed Updates link on the login page. Access the View Installed Updates link from the About Cisco EPN Manager page: Click the settings icon at the top right of the page. Click About Cisco EPN Manager. Click View Installed Updates. Choose Administration > Licenses and Software Updates > Software Update in the EPN Manager. (This method provides the most detail.) The Software Update page displays two tabs: Installed Updates: Updates that Cisco EPN Manager is currently using. Uploaded Update Files: Update files that have been uploaded to the server (including those that are not being used). The Corresponding Updates field lists any prerequisite updates that were also uploaded.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by these vulnerabilities.
Workarounds
There are no workarounds that address these vulnerabilities.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"] Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades. When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Customers Without Service Contracts Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"] Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade. Fixed Releases These vulnerabilities are fixed in Cisco PI Software Releases 3.4.1, 3.5, and 3.6, and EPN Manager Release 3.0.1. Note: Customers running releases of Cisco PI 3.4 must apply the Security Update to the latest maintenance release, PI 3.4.1, to patch these vulnerabilities for PI 3.4. Note: Customers running releases of Cisco PI 3.5 must apply the Security Update to PI 3.5. Customers can download the Cisco PI Software from the Software Center ["https://software.cisco.com/download/home"] on Cisco.com by doing the following: Click Browse all. Choose Cloud and Systems Management > Routing and Switching Management > Network Management Solutions > Prime Infrastructure. Customers can download the Cisco EPN Manager Software from the Software Center ["https://software.cisco.com/download/home"] on Cisco.com by doing the following: Click Browse all. Choose Cloud and Systems Management > Routing and Switching Management > Evolved Programmable Network Manager.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.
Source
Cisco would like to thank Steven Seeley (mr_me) of Source Incite for reporting these vulnerabilities.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.


To clipboard 

{
  "document": {
    "acknowledgments": [
      {
        "summary": "Cisco would like to thank Steven Seeley (mr_me) of Source Incite for reporting these vulnerabilities."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow a remote attacker to gain the ability to execute arbitrary code with elevated privileges on the underlying operating system.\r\n\r\nOne of these issues, CVE-2019-1821, can be exploited by an unauthenticated attacker that has network access to the affected administrative interface.\r\n\r\nThe second and third issues, CVE-2019-1822 and CVE-2019-1823, require that an attacker have valid credentials to authenticate to the impacted administrative interface.\r\n\r\nThese vulnerabilities exist because the software improperly validates user-supplied input. An attacker could exploit these vulnerabilities by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.\r\n\r\nCisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce\"]",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "These vulnerabilities affect Cisco PI Software Releases prior to 3.4.1, 3.5, and 3.6, and EPN Manager Releases prior to 3.0.1.\r\n  Determining the PI Software Release\r\nThe administrator can view the PI software release in three ways:\r\n\r\nThe administrator can issue the show version command from the console CLI. The following output is from an affected application that is running PI Software Release 3.3.0:\r\n\r\npiconsole# show version\r\nCisco Application Deployment Engine OS Release: 3.1\r\nADE-OS Build Version: 3.1.0.001\r\nADE-OS System Architecture: x86_64\r\n\r\nCopyright (c) 2009-2017 by Cisco Systems, Inc.\r\nAll rights reserved.\r\nHostname: XXXXXXXXX\r\n\r\nVersion information of installed applications\r\n---------------------------------------------\r\n\r\nCisco Prime Infrastructure\r\n********************************************************\r\nVersion : 3.3.0\r\nBuild : 3.3.0.0.342\r\n\r\n\r\nThe administrator can view the PI release and maintenance release updates by connecting to the web interface using the http(s)://\u003csystem-ip\u003e      access URL. The PI software release is displayed on the welcome screen.      The following is an example of text that is displayed in the pop-up      window for PI Software Release 3.3:\r\n\r\nCisco Prime Infrastructure\r\nVersion 3.3\r\nView Installed Update\r\n\r\nThe administrator can also view the PI release and maintenance releases by logging in to the web interface using the http(s)://\u003csystem-ip\u003e access URL and choosing Gear \u003e About Prime Infrastructure.\r\n  Determining the EPN Manager Software Release\r\nThe administrator can log in to the web GUI to view the software updates in three ways:\r\n\r\nClick the View Installed Updates link on the login page.\r\nAccess the View Installed Updates link from the About Cisco EPN Manager page:\r\n\r\n\r\nClick the settings icon at the top right of the page.\r\nClick About Cisco EPN Manager.\r\nClick View Installed Updates.\r\n\r\nChoose Administration \u003e Licenses and Software Updates \u003e Software Update in the EPN Manager. (This method provides the most detail.)\r\n\r\nThe Software Update page displays two tabs:\r\n\r\nInstalled Updates: Updates that Cisco EPN Manager is currently using.\r\nUploaded Update Files: Update files that have been uploaded to the server (including those that are not being used). The Corresponding Updates field      lists any prerequisite updates that were also uploaded.",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by these vulnerabilities.",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address these vulnerabilities.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n\r\nCustomers Without Service Contracts\r\n\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:\r\nhttps://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n\r\nFixed Releases\r\n\r\nThese vulnerabilities are fixed in Cisco PI Software Releases 3.4.1, 3.5, and 3.6, and EPN Manager Release 3.0.1.\r\n\r\nNote: Customers running releases of Cisco PI 3.4 must apply the Security Update to the latest maintenance release, PI 3.4.1, to patch these vulnerabilities for PI 3.4.\r\n\r\nNote: Customers running releases of Cisco PI 3.5 must apply the Security Update to PI 3.5.\r\n\r\nCustomers can download the Cisco PI Software from the Software Center [\"https://software.cisco.com/download/home\"] on Cisco.com by doing the following:\r\n        Click Browse all.      Choose Cloud and Systems Management \u003e Routing and Switching Management \u003e Network Management Solutions \u003e Prime Infrastructure.\r\n\r\nCustomers can download the Cisco EPN Manager Software from the Software Center [\"https://software.cisco.com/download/home\"] on Cisco.com by doing the following:\r\n        Click Browse all.      Choose Cloud and Systems Management \u003e Routing and Switching Management \u003e Evolved Programmable Network Manager.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "Cisco would like to thank Steven Seeley (mr_me) of Source Incite for reporting these vulnerabilities.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.",
      "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco Prime Infrastructure and Evolved Programmable Network Manager Remote Code Execution Vulnerabilities",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-pi-rce"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html",
        "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"
      },
      {
        "category": "external",
        "summary": "Cisco Security Advisories and Alerts page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html",
        "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"
      },
      {
        "category": "external",
        "summary": "Software Center",
        "url": "https://software.cisco.com/download/home"
      },
      {
        "category": "external",
        "summary": "Software Center",
        "url": "https://software.cisco.com/download/home"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco Prime Infrastructure and Evolved Programmable Network Manager Remote Code Execution Vulnerabilities",
    "tracking": {
      "current_release_date": "2019-05-15T22:58:48+00:00",
      "generator": {
        "date": "2022-09-03T03:01:49+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-20190515-pi-rce",
      "initial_release_date": "2019-05-15T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2019-05-14T19:25:40+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        },
        {
          "date": "2019-05-15T22:58:48+00:00",
          "number": "1.1.0",
          "summary": "Updated summary to clarify CVSS score change."
        }
      ],
      "status": "final",
      "version": "1.1.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco Prime Infrastructure",
            "product": {
              "name": "Cisco Prime Infrastructure ",
              "product_id": "CSAFPID-190324"
            }
          },
          {
            "category": "product_family",
            "name": "Cisco Evolved Programmable Network Manager (EPNM)",
            "product": {
              "name": "Cisco Evolved Programmable Network Manager (EPNM) ",
              "product_id": "CSAFPID-213688"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2019-1822",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvo28671"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvo62280"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-190324",
          "CSAFPID-213688"
        ]
      },
      "release_date": "2019-05-15T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-213688",
            "CSAFPID-190324"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-190324",
            "CSAFPID-213688"
          ]
        }
      ],
      "title": "Cisco Prime Infrastructure and Evolved Programmable Network Manager Remote Code Execution Vulnerability"
    },
    {
      "cve": "CVE-2019-1823",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvo22842"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvo62264"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-190324",
          "CSAFPID-213688"
        ]
      },
      "release_date": "2019-05-15T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-213688",
            "CSAFPID-190324"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-190324",
            "CSAFPID-213688"
          ]
        }
      ],
      "title": "Cisco Prime Infrastructure and Evolved Programmable Network Manager Remote Code Execution Vulnerability"
    },
    {
      "cve": "CVE-2019-1821",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvo28680"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvo62258"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-190324",
          "CSAFPID-213688"
        ]
      },
      "release_date": "2019-05-15T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-213688",
            "CSAFPID-190324"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-190324",
            "CSAFPID-213688"
          ]
        }
      ],
      "title": "Cisco Prime Infrastructure and Evolved Programmable Network Manager Remote Code Execution Vulnerability"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.