Affected: Linux

In the Linux kernel, the following vulnerability has been resolved:

usb: musb: Fix hardware lockup on first Rx endpoint request

There is a possibility that a request's callback could be invoked from usb_ep_queue() (call trace below, supplemented with missing calls):

req->complete from usb_gadget_giveback_request (drivers/usb/gadget/udc/core.c:999) usb_gadget_giveback_request from musb_g_giveback (drivers/usb/musb/musb_gadget.c:147) musb_g_giveback from rxstate (drivers/usb/musb/musb_gadget.c:784) rxstate from musb_ep_restart (drivers/usb/musb/musb_gadget.c:1169) musb_ep_restart from musb_ep_restart_resume_work (drivers/usb/musb/musb_gadget.c:1176) musb_ep_restart_resume_work from musb_queue_resume_work (drivers/usb/musb/musb_core.c:2279) musb_queue_resume_work from musb_gadget_queue (drivers/usb/musb/musb_gadget.c:1241) musb_gadget_queue from usb_ep_queue (drivers/usb/gadget/udc/core.c:300)

According to the docstring of usb_ep_queue(), this should not happen:

"Note that @req's ->complete() callback must never be called from within usb_ep_queue() as that can create deadlock situations."

In fact, a hardware lockup might occur in the following sequence:

1. The gadget is initialized using musb_gadget_enable(). 2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an interrupt. 3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an empty queue (next_request() returns NULL). The interrupt flag has already been cleared by…